diff --git a/5.024.002-64bit,threaded/DevelPatchPerl.patch b/5.024.002-64bit,threaded/DevelPatchPerl.patch deleted file mode 100644 index 4c69d78..0000000 --- a/5.024.002-64bit,threaded/DevelPatchPerl.patch +++ /dev/null @@ -1,97 +0,0 @@ -diff --git a/hints/linux.sh b/hints/linux.sh -index fb5a46e..3f38ea0 100644 ---- a/hints/linux.sh -+++ b/hints/linux.sh -@@ -221,92 +221,6 @@ case "$libc" in - ;; - esac - --# Are we using ELF? Thanks to Kenneth Albanowski --# for this test. --cat >try.c <<'EOM' --/* Test for whether ELF binaries are produced */ --#include --#include --#include --main() { -- char buffer[4]; -- int i=open("a.out",O_RDONLY); -- if(i==-1) -- exit(1); /* fail */ -- if(read(i,&buffer[0],4)<4) -- exit(1); /* fail */ -- if(buffer[0] != 127 || buffer[1] != 'E' || -- buffer[2] != 'L' || buffer[3] != 'F') -- exit(1); /* fail */ -- exit(0); /* succeed (yes, it's ELF) */ --} --EOM --if ${cc:-gcc} $ccflags $ldflags try.c >/dev/null 2>&1 && $run ./a.out; then -- cat <<'EOM' >&4 -- --You appear to have ELF support. I'll try to use it for dynamic loading. --If dynamic loading doesn't work, read hints/linux.sh for further information. --EOM -- --else -- cat <<'EOM' >&4 -- --You don't have an ELF gcc. I will use dld if possible. If you are --using a version of DLD earlier than 3.2.6, or don't have it at all, you --should probably upgrade. If you are forced to use 3.2.4, you should --uncomment a couple of lines in hints/linux.sh and restart Configure so --that shared libraries will be disallowed. -- --EOM -- lddlflags="-r $lddlflags" -- # These empty values are so that Configure doesn't put in the -- # Linux ELF values. -- ccdlflags=' ' -- cccdlflags=' ' -- ccflags="-DOVR_DBL_DIG=14 $ccflags" -- so='sa' -- dlext='o' -- nm_so_opt=' ' -- ## If you are using DLD 3.2.4 which does not support shared libs, -- ## uncomment the next two lines: -- #ldflags="-static" -- #so='none' -- -- # In addition, on some systems there is a problem with perl and NDBM -- # which causes AnyDBM and NDBM_File to lock up. This is evidenced -- # in the tests as AnyDBM just freezing. Apparently, this only -- # happens on a.out systems, so we disable NDBM for all a.out linux -- # systems. If someone can suggest a more robust test -- # that would be appreciated. -- # -- # More info: -- # Date: Wed, 7 Feb 1996 03:21:04 +0900 -- # From: Jeffrey Friedl -- # -- # I tried compiling with DBM support and sure enough things locked up -- # just as advertised. Checking into it, I found that the lockup was -- # during the call to dbm_open. Not *in* dbm_open -- but between the call -- # to and the jump into. -- # -- # To make a long story short, making sure that the *.a and *.sa pairs of -- # /usr/lib/lib{m,db,gdbm}.{a,sa} -- # were perfectly in sync took care of it. -- # -- # This will generate a harmless Whoa There! message -- case "$d_dbm_open" in -- '') cat <<'EOM' >&4 -- --Disabling ndbm. This will generate a Whoa There message in Configure. --Read hints/linux.sh for further information. --EOM -- # You can override this with Configure -Dd_dbm_open -- d_dbm_open=undef -- ;; -- esac --fi -- --rm -f try.c a.out -- - if ${sh:-/bin/sh} -c exit; then - echo '' - echo 'You appear to have a working bash. Good.' diff --git a/5.024.002-64bit,threaded/Dockerfile b/5.024.002-64bit,threaded/Dockerfile deleted file mode 100644 index 235b215..0000000 --- a/5.024.002-64bit,threaded/Dockerfile +++ /dev/null @@ -1,27 +0,0 @@ -FROM buildpack-deps:stretch -LABEL maintainer="Peter Martini , Zak B. Elep " - -COPY *.patch /usr/src/perl/ -WORKDIR /usr/src/perl - -RUN curl -SL https://www.cpan.org/src/5.0/perl-5.24.2.tar.bz2 -o perl-5.24.2.tar.bz2 \ - && echo 'e28c8fa588c4227eb25350036b45d7b1b46d61bb3a2194ee09dc79be6ed0fd0f *perl-5.24.2.tar.bz2' | sha256sum -c - \ - && tar --strip-components=1 -xjf perl-5.24.2.tar.bz2 -C /usr/src/perl \ - && rm perl-5.24.2.tar.bz2 \ - && cat *.patch | patch -p1 \ - && gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)" \ - && archBits="$(dpkg-architecture --query DEB_BUILD_ARCH_BITS)" \ - && archFlag="$([ "$archBits" = '64' ] && echo '-Duse64bitall' || echo '-Duse64bitint')" \ - && ./Configure -Darchname="$gnuArch" "$archFlag" -Dusethreads -Duseshrplib -Dvendorprefix=/usr/local -des \ - && make -j$(nproc) \ - && TEST_JOBS=$(nproc) make test_harness \ - && make install \ - && cd /usr/src \ - && curl -LO http://www.cpan.org/authors/id/M/MI/MIYAGAWA/App-cpanminus-1.7043.tar.gz \ - && echo '68a06f7da80882a95bc02c92c7ee305846fb6ab648cf83678ea945e44ad65c65 *App-cpanminus-1.7043.tar.gz' | sha256sum -c - \ - && tar -xzf App-cpanminus-1.7043.tar.gz && cd App-cpanminus-1.7043 && perl bin/cpanm . && cd /root \ - && rm -fr ./cpanm /root/.cpanm /usr/src/perl /usr/src/App-cpanminus-1.7043* /tmp/* - -WORKDIR /root - -CMD ["perl5.24.2","-de0"] diff --git a/5.024.002-64bit/DevelPatchPerl.patch b/5.024.002-64bit/DevelPatchPerl.patch deleted file mode 100644 index 4c69d78..0000000 --- a/5.024.002-64bit/DevelPatchPerl.patch +++ /dev/null @@ -1,97 +0,0 @@ -diff --git a/hints/linux.sh b/hints/linux.sh -index fb5a46e..3f38ea0 100644 ---- a/hints/linux.sh -+++ b/hints/linux.sh -@@ -221,92 +221,6 @@ case "$libc" in - ;; - esac - --# Are we using ELF? Thanks to Kenneth Albanowski --# for this test. --cat >try.c <<'EOM' --/* Test for whether ELF binaries are produced */ --#include --#include --#include --main() { -- char buffer[4]; -- int i=open("a.out",O_RDONLY); -- if(i==-1) -- exit(1); /* fail */ -- if(read(i,&buffer[0],4)<4) -- exit(1); /* fail */ -- if(buffer[0] != 127 || buffer[1] != 'E' || -- buffer[2] != 'L' || buffer[3] != 'F') -- exit(1); /* fail */ -- exit(0); /* succeed (yes, it's ELF) */ --} --EOM --if ${cc:-gcc} $ccflags $ldflags try.c >/dev/null 2>&1 && $run ./a.out; then -- cat <<'EOM' >&4 -- --You appear to have ELF support. I'll try to use it for dynamic loading. --If dynamic loading doesn't work, read hints/linux.sh for further information. --EOM -- --else -- cat <<'EOM' >&4 -- --You don't have an ELF gcc. I will use dld if possible. If you are --using a version of DLD earlier than 3.2.6, or don't have it at all, you --should probably upgrade. If you are forced to use 3.2.4, you should --uncomment a couple of lines in hints/linux.sh and restart Configure so --that shared libraries will be disallowed. -- --EOM -- lddlflags="-r $lddlflags" -- # These empty values are so that Configure doesn't put in the -- # Linux ELF values. -- ccdlflags=' ' -- cccdlflags=' ' -- ccflags="-DOVR_DBL_DIG=14 $ccflags" -- so='sa' -- dlext='o' -- nm_so_opt=' ' -- ## If you are using DLD 3.2.4 which does not support shared libs, -- ## uncomment the next two lines: -- #ldflags="-static" -- #so='none' -- -- # In addition, on some systems there is a problem with perl and NDBM -- # which causes AnyDBM and NDBM_File to lock up. This is evidenced -- # in the tests as AnyDBM just freezing. Apparently, this only -- # happens on a.out systems, so we disable NDBM for all a.out linux -- # systems. If someone can suggest a more robust test -- # that would be appreciated. -- # -- # More info: -- # Date: Wed, 7 Feb 1996 03:21:04 +0900 -- # From: Jeffrey Friedl -- # -- # I tried compiling with DBM support and sure enough things locked up -- # just as advertised. Checking into it, I found that the lockup was -- # during the call to dbm_open. Not *in* dbm_open -- but between the call -- # to and the jump into. -- # -- # To make a long story short, making sure that the *.a and *.sa pairs of -- # /usr/lib/lib{m,db,gdbm}.{a,sa} -- # were perfectly in sync took care of it. -- # -- # This will generate a harmless Whoa There! message -- case "$d_dbm_open" in -- '') cat <<'EOM' >&4 -- --Disabling ndbm. This will generate a Whoa There message in Configure. --Read hints/linux.sh for further information. --EOM -- # You can override this with Configure -Dd_dbm_open -- d_dbm_open=undef -- ;; -- esac --fi -- --rm -f try.c a.out -- - if ${sh:-/bin/sh} -c exit; then - echo '' - echo 'You appear to have a working bash. Good.' diff --git a/5.024.002-64bit/Dockerfile b/5.024.002-64bit/Dockerfile deleted file mode 100644 index 359e6b1..0000000 --- a/5.024.002-64bit/Dockerfile +++ /dev/null @@ -1,27 +0,0 @@ -FROM buildpack-deps:stretch -LABEL maintainer="Peter Martini , Zak B. Elep " - -COPY *.patch /usr/src/perl/ -WORKDIR /usr/src/perl - -RUN curl -SL https://www.cpan.org/src/5.0/perl-5.24.2.tar.bz2 -o perl-5.24.2.tar.bz2 \ - && echo 'e28c8fa588c4227eb25350036b45d7b1b46d61bb3a2194ee09dc79be6ed0fd0f *perl-5.24.2.tar.bz2' | sha256sum -c - \ - && tar --strip-components=1 -xjf perl-5.24.2.tar.bz2 -C /usr/src/perl \ - && rm perl-5.24.2.tar.bz2 \ - && cat *.patch | patch -p1 \ - && gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)" \ - && archBits="$(dpkg-architecture --query DEB_BUILD_ARCH_BITS)" \ - && archFlag="$([ "$archBits" = '64' ] && echo '-Duse64bitall' || echo '-Duse64bitint')" \ - && ./Configure -Darchname="$gnuArch" "$archFlag" -Duseshrplib -Dvendorprefix=/usr/local -des \ - && make -j$(nproc) \ - && TEST_JOBS=$(nproc) make test_harness \ - && make install \ - && cd /usr/src \ - && curl -LO http://www.cpan.org/authors/id/M/MI/MIYAGAWA/App-cpanminus-1.7043.tar.gz \ - && echo '68a06f7da80882a95bc02c92c7ee305846fb6ab648cf83678ea945e44ad65c65 *App-cpanminus-1.7043.tar.gz' | sha256sum -c - \ - && tar -xzf App-cpanminus-1.7043.tar.gz && cd App-cpanminus-1.7043 && perl bin/cpanm . && cd /root \ - && rm -fr ./cpanm /root/.cpanm /usr/src/perl /usr/src/App-cpanminus-1.7043* /tmp/* - -WORKDIR /root - -CMD ["perl5.24.2","-de0"] diff --git a/5.026.000-64bit,threaded/DevelPatchPerl.patch b/5.026.000-64bit,threaded/DevelPatchPerl.patch deleted file mode 100644 index e69de29..0000000 diff --git a/5.026.000-64bit,threaded/Dockerfile b/5.026.000-64bit,threaded/Dockerfile deleted file mode 100644 index 6f792f5..0000000 --- a/5.026.000-64bit,threaded/Dockerfile +++ /dev/null @@ -1,27 +0,0 @@ -FROM buildpack-deps:stretch -LABEL maintainer="Peter Martini , Zak B. Elep " - -COPY *.patch /usr/src/perl/ -WORKDIR /usr/src/perl - -RUN curl -SL https://www.cpan.org/src/5.0/perl-5.26.0.tar.bz2 -o perl-5.26.0.tar.bz2 \ - && echo 'f21d66de84982175e95ad15fd8d0e22fed2cc2de7e4394f5d48dbe451be2f6f2 *perl-5.26.0.tar.bz2' | sha256sum -c - \ - && tar --strip-components=1 -xjf perl-5.26.0.tar.bz2 -C /usr/src/perl \ - && rm perl-5.26.0.tar.bz2 \ - && cat *.patch | patch -p1 \ - && gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)" \ - && archBits="$(dpkg-architecture --query DEB_BUILD_ARCH_BITS)" \ - && archFlag="$([ "$archBits" = '64' ] && echo '-Duse64bitall' || echo '-Duse64bitint')" \ - && ./Configure -Darchname="$gnuArch" "$archFlag" -Dusethreads -Duseshrplib -Dvendorprefix=/usr/local -des \ - && make -j$(nproc) \ - && TEST_JOBS=$(nproc) make test_harness \ - && make install \ - && cd /usr/src \ - && curl -LO http://www.cpan.org/authors/id/M/MI/MIYAGAWA/App-cpanminus-1.7043.tar.gz \ - && echo '68a06f7da80882a95bc02c92c7ee305846fb6ab648cf83678ea945e44ad65c65 *App-cpanminus-1.7043.tar.gz' | sha256sum -c - \ - && tar -xzf App-cpanminus-1.7043.tar.gz && cd App-cpanminus-1.7043 && perl bin/cpanm . && cd /root \ - && rm -fr ./cpanm /root/.cpanm /usr/src/perl /usr/src/App-cpanminus-1.7043* /tmp/* - -WORKDIR /root - -CMD ["perl5.26.0","-de0"] diff --git a/5.026.000-64bit/DevelPatchPerl.patch b/5.026.000-64bit/DevelPatchPerl.patch deleted file mode 100644 index e69de29..0000000 diff --git a/5.026.000-64bit/Dockerfile b/5.026.000-64bit/Dockerfile deleted file mode 100644 index cc8e337..0000000 --- a/5.026.000-64bit/Dockerfile +++ /dev/null @@ -1,27 +0,0 @@ -FROM buildpack-deps:stretch -LABEL maintainer="Peter Martini , Zak B. Elep " - -COPY *.patch /usr/src/perl/ -WORKDIR /usr/src/perl - -RUN curl -SL https://www.cpan.org/src/5.0/perl-5.26.0.tar.bz2 -o perl-5.26.0.tar.bz2 \ - && echo 'f21d66de84982175e95ad15fd8d0e22fed2cc2de7e4394f5d48dbe451be2f6f2 *perl-5.26.0.tar.bz2' | sha256sum -c - \ - && tar --strip-components=1 -xjf perl-5.26.0.tar.bz2 -C /usr/src/perl \ - && rm perl-5.26.0.tar.bz2 \ - && cat *.patch | patch -p1 \ - && gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)" \ - && archBits="$(dpkg-architecture --query DEB_BUILD_ARCH_BITS)" \ - && archFlag="$([ "$archBits" = '64' ] && echo '-Duse64bitall' || echo '-Duse64bitint')" \ - && ./Configure -Darchname="$gnuArch" "$archFlag" -Duseshrplib -Dvendorprefix=/usr/local -des \ - && make -j$(nproc) \ - && TEST_JOBS=$(nproc) make test_harness \ - && make install \ - && cd /usr/src \ - && curl -LO http://www.cpan.org/authors/id/M/MI/MIYAGAWA/App-cpanminus-1.7043.tar.gz \ - && echo '68a06f7da80882a95bc02c92c7ee305846fb6ab648cf83678ea945e44ad65c65 *App-cpanminus-1.7043.tar.gz' | sha256sum -c - \ - && tar -xzf App-cpanminus-1.7043.tar.gz && cd App-cpanminus-1.7043 && perl bin/cpanm . && cd /root \ - && rm -fr ./cpanm /root/.cpanm /usr/src/perl /usr/src/App-cpanminus-1.7043* /tmp/* - -WORKDIR /root - -CMD ["perl5.26.0","-de0"]