Remove generated directories

5.020.003-main,debugging,longdouble,threaded-bullseye/DevelPatchPerl.patch

@@ -1,281 +0,0 @@
-diff --git a/Configure b/Configure
-index 438b926..a762f78 100755
---- a/Configure
-+++ b/Configure
-@@ -4591,7 +4591,7 @@ else
- fi
- $rm -f try try.*
- case "$gccversion" in
--1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-+1.*) cpp=`./loc gcc-cpp $cpp $pth` ;;
- esac
- case "$gccversion" in
- '') gccosandvers='' ;;
-@@ -4631,7 +4631,7 @@ esac
- # gcc 3.* complain about adding -Idirectories that they already know about,
- # so we will take those off from locincpth.
- case "$gccversion" in
--3*)
-+3.*)
-     echo "main(){}">try.c
-     for incdir in $locincpth; do
-        warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
-@@ -5328,13 +5328,13 @@ fi
- case "$hint" in
- default|recommended)
- 	case "$gccversion" in
--	1*) dflt="$dflt -fpcc-struct-return" ;;
-+	1.*) dflt="$dflt -fpcc-struct-return" ;;
- 	esac
- 	case "$optimize:$DEBUGGING" in
- 	*-g*:old) dflt="$dflt -DDEBUGGING";;
- 	esac
- 	case "$gccversion" in
--	2*) if $test -d /etc/conf/kconfig.d &&
-+	2.*) if $test -d /etc/conf/kconfig.d &&
- 			$contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- 		then
- 			# Interactive Systems (ISC) POSIX mode.
-@@ -5343,7 +5343,7 @@ default|recommended)
- 		;;
- 	esac
- 	case "$gccversion" in
--	1*) ;;
-+	1.*) ;;
- 	2.[0-8]*) ;;
- 	?*)	set strict-aliasing -fno-strict-aliasing
- 		eval $checkccflag
-@@ -5445,7 +5445,7 @@ case "$cppflags" in
- *)  cppflags="$cppflags $ccflags" ;;
- esac
- case "$gccversion" in
--1*) cppflags="$cppflags -D__GNUC__"
-+1.*) cppflags="$cppflags -D__GNUC__"
- esac
- case "$mips_type" in
- '');;
-diff --git a/cpan/Time-Local/t/Local.t b/cpan/Time-Local/t/Local.t
-index 472e71a..0a852a0 100644
---- a/cpan/Time-Local/t/Local.t
-+++ b/cpan/Time-Local/t/Local.t
-@@ -91,7 +91,7 @@ for (@time, @neg_time) {
- 
-         # Test timelocal()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timelocal($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = localtime($time);
-@@ -107,7 +107,7 @@ for (@time, @neg_time) {
- 
-         # Test timegm()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timegm($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = gmtime($time);
-@@ -125,7 +125,6 @@ for (@time, @neg_time) {
- 
- for (@bad_time) {
-     my($year, $mon, $mday, $hour, $min, $sec) = @$_;
--    $year -= 1900;
-     $mon--;
- 
-     eval { timegm($sec,$min,$hour,$mday,$mon,$year) };
-@@ -134,14 +133,14 @@ for (@bad_time) {
- }
- 
- {
--    is(timelocal(0,0,1,1,0,90) - timelocal(0,0,0,1,0,90), 3600,
-+    is(timelocal(0,0,1,1,0,1990) - timelocal(0,0,0,1,0,1990), 3600,
-        'one hour difference between two calls to timelocal');
- 
--    is(timelocal(1,2,3,1,0,100) - timelocal(1,2,3,31,11,99), 24 * 3600,
-+    is(timelocal(1,2,3,1,0,2000) - timelocal(1,2,3,31,11,1999), 24 * 3600,
-        'one day difference between two calls to timelocal');
- 
-     # Diff beween Jan 1, 1980 and Mar 1, 1980 = (31 + 29 = 60 days)
--    is(timegm(0,0,0, 1, 2, 80) - timegm(0,0,0, 1, 0, 80), 60 * 24 * 3600,
-+    is(timegm(0,0,0, 1, 2, 1980) - timegm(0,0,0, 1, 0, 1980), 60 * 24 * 3600,
-        '60 day difference between two calls to timegm');
- }
- 
-diff --git a/hints/linux.sh b/hints/linux.sh
-index 956adfc..c749f0f 100644
---- a/hints/linux.sh
-+++ b/hints/linux.sh
-@@ -85,7 +85,7 @@ uname_minus_m="${uname_minus_m:-"$targetarch"}"
- 
- # Check if we're about to use Intel's ICC compiler
- case "`${cc:-cc} -V 2>&1`" in
--*"Intel(R) C++ Compiler"*|*"Intel(R) C Compiler"*)
-+*"Intel(R) C"*" Compiler"*)
-     # record the version, formats:
-     # icc (ICC) 10.1 20080801
-     # icpc (ICC) 10.1 20080801
-@@ -165,6 +165,9 @@ esac
- # plibpth to bypass this check.
- if [ -x /usr/bin/gcc ] ; then
-     gcc=/usr/bin/gcc
-+# clang also provides -print-search-dirs
-+elif ${cc:-cc} --version 2>/dev/null | grep -q '^clang ' ; then
-+    gcc=${cc:-cc}
- else
-     gcc=gcc
- fi
-@@ -178,6 +181,33 @@ case "$plibpth" in
-     ;;
- esac
- 
-+# For the musl libc, perl should #define _GNU_SOURCE.  Otherwise, some
-+# available functions, like memem, won't be used.  See the discussion in
-+# [perl #133760].  musl doesn't offer an easy way to identify it, but,
-+# at least on alpine linux, the ldd --version output contains the
-+# string 'musl.'
-+case `ldd --version 2>&1` in
-+    musl*)  ccflags="$ccflags -D_GNU_SOURCE" ;;
-+        *) ;;
-+esac
-+
-+# libquadmath is sometimes installed as gcc internal library,
-+# so contrary to our usual policy of *not* looking at gcc internal
-+# directories we now *do* look at them, in case they contain
-+# the quadmath library.
-+# XXX This may apply to other gcc internal libraries, if such exist.
-+# XXX This could be at Configure level, but then the $gcc is messy.
-+case "$usequadmath" in
-+"$define")
-+  for d in `LANG=C LC_ALL=C $gcc $ccflags $ldflags -print-search-dirs | grep libraries | cut -f2- -d= | tr ':' $trnl | grep 'gcc' | sed -e 's:/$::'`
-+  do
-+    case `ls $d/*libquadmath*$so* 2>/dev/null` in
-+    $d/*libquadmath*$so*) xlibpth="$xlibpth $d" ;;
-+    esac
-+  done
-+  ;;
-+esac
-+
- case "$libc" in
- '')
- # If you have glibc, then report the version for ./myconfig bug reporting.
-@@ -204,92 +234,6 @@ case "$libc" in
-     ;;
- esac
- 
--# Are we using ELF?  Thanks to Kenneth Albanowski <kjahds@kjahds.com>
--# for this test.
--cat >try.c <<'EOM'
--/* Test for whether ELF binaries are produced */
--#include <fcntl.h>
--#include <stdlib.h>
--#include <unistd.h>
--main() {
--	char buffer[4];
--	int i=open("a.out",O_RDONLY);
--	if(i==-1)
--		exit(1); /* fail */
--	if(read(i,&buffer[0],4)<4)
--		exit(1); /* fail */
--	if(buffer[0] != 127 || buffer[1] != 'E' ||
--           buffer[2] != 'L' || buffer[3] != 'F')
--		exit(1); /* fail */
--	exit(0); /* succeed (yes, it's ELF) */
--}
--EOM
--if ${cc:-gcc} $ccflags $ldflags try.c >/dev/null 2>&1 && $run ./a.out; then
--    cat <<'EOM' >&4
--
--You appear to have ELF support.  I'll try to use it for dynamic loading.
--If dynamic loading doesn't work, read hints/linux.sh for further information.
--EOM
--
--else
--    cat <<'EOM' >&4
--
--You don't have an ELF gcc.  I will use dld if possible.  If you are
--using a version of DLD earlier than 3.2.6, or don't have it at all, you
--should probably upgrade. If you are forced to use 3.2.4, you should
--uncomment a couple of lines in hints/linux.sh and restart Configure so
--that shared libraries will be disallowed.
--
--EOM
--    lddlflags="-r $lddlflags"
--    # These empty values are so that Configure doesn't put in the
--    # Linux ELF values.
--    ccdlflags=' '
--    cccdlflags=' '
--    ccflags="-DOVR_DBL_DIG=14 $ccflags"
--    so='sa'
--    dlext='o'
--    nm_so_opt=' '
--    ## If you are using DLD 3.2.4 which does not support shared libs,
--    ## uncomment the next two lines:
--    #ldflags="-static"
--    #so='none'
--
--	# In addition, on some systems there is a problem with perl and NDBM
--	# which causes AnyDBM and NDBM_File to lock up. This is evidenced
--	# in the tests as AnyDBM just freezing.  Apparently, this only
--	# happens on a.out systems, so we disable NDBM for all a.out linux
--	# systems.  If someone can suggest a more robust test
--	#  that would be appreciated.
--	#
--	# More info:
--	# Date: Wed, 7 Feb 1996 03:21:04 +0900
--	# From: Jeffrey Friedl <jfriedl@nff.ncl.omron.co.jp>
--	#
--	# I tried compiling with DBM support and sure enough things locked up
--	# just as advertised. Checking into it, I found that the lockup was
--	# during the call to dbm_open. Not *in* dbm_open -- but between the call
--	# to and the jump into.
--	#
--	# To make a long story short, making sure that the *.a and *.sa pairs of
--	#   /usr/lib/lib{m,db,gdbm}.{a,sa}
--	# were perfectly in sync took care of it.
--	#
--	# This will generate a harmless Whoa There! message
--	case "$d_dbm_open" in
--	'')	cat <<'EOM' >&4
--
--Disabling ndbm.  This will generate a Whoa There message in Configure.
--Read hints/linux.sh for further information.
--EOM
--		# You can override this with Configure -Dd_dbm_open
--		d_dbm_open=undef
--		;;
--	esac
--fi
--
--rm -f try.c a.out
--
- if ${sh:-/bin/sh} -c exit; then
-   echo ''
-   echo 'You appear to have a working bash.  Good.'
-@@ -497,7 +441,7 @@ then
-        DBLIB="$DBDIR/libdb.so"
-        if [ -f $DBLIB ]
-        then
--         if ${nm:-nm} -u $DBLIB | grep pthread >/dev/null
-+         if ${nm:-nm} -u $DBLIB 2>/dev/null | grep pthread >/dev/null
-          then
-            if ldd $DBLIB | grep pthread >/dev/null
-            then
-diff --git a/pp.c b/pp.c
-index 4ec6887..729239c 100644
---- a/pp.c
-+++ b/pp.c
-@@ -3435,8 +3435,12 @@ PP(pp_crypt)
- #if defined(__GLIBC__) || defined(__EMX__)
- 	if (PL_reentrant_buffer->_crypt_struct_buffer) {
- 	    PL_reentrant_buffer->_crypt_struct_buffer->initialized = 0;
--	    /* work around glibc-2.2.5 bug */
-+#if (defined(__GLIBC__) && __GLIBC__ == 2) && \
-+    (defined(__GLIBC_MINOR__) && __GLIBC_MINOR__ >= 2 && __GLIBC_MINOR__ < 4)
-+	    /* work around glibc-2.2.5 bug, has been fixed at some
-+	     * time in glibc-2.3.X */
- 	    PL_reentrant_buffer->_crypt_struct_buffer->current_saltbits = 0;
-+#endif
- 	}
- #endif
-     }

5.020.003-main,debugging,longdouble,threaded-bullseye/Dockerfile

@@ -1,59 +0,0 @@
-FROM debian:bullseye-backports
-LABEL maintainer="Ryan Voots <simcop@cpan.org>"
-
-COPY *.patch /usr/src/perl/
-WORKDIR /usr/src/perl
-
-ENV DEBIAN_FRONTEND=noninteractive
-
-RUN perl -i.bak -pE '$x=$_; $x=~s|^deb |deb-src |g;$_.=$x' /etc/apt/sources.list \
-    && apt update \
-    && apt -yq full-upgrade \
-    && apt -yq build-dep perl \
-    &&     apt-get install -y --no-install-recommends \
-       bzip2 \
-       ca-certificates \
-       # cpio \
-       curl \
-       dpkg-dev \
-       # file \
-       gcc \
-       # g++ \
-       libbz2-dev \
-       libdb-dev \
-       libc6-dev \
-       libgdbm-dev \
-       liblzma-dev \
-       make \
-       netbase \
-       patch \
-       procps \
-       zlib1g-dev \
-       xz-utils \
-    && curl -SL https://www.cpan.org/src/5.0/perl-5.20.3.tar.bz2 -o perl-5.20.3.tar.bz2 \
-    && echo '1b40068166c242e34a536836286e70b78410602a80615143301e52aa2901493b *perl-5.20.3.tar.bz2' | sha256sum -c -
-RUN tar --strip-components=1 -xaf perl-5.20.3.tar.bz2 -C /usr/src/perl \
-    && rm perl-5.20.3.tar.bz2 \
-    && cat *.patch | patch -p1 \
-    && echo 'print "1..0 # Skipped: Tests are invalid"' > /usr/src/perl/ext/GDBM_File/t/fatal.t
-RUN gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)" \
-    && archBits="$(dpkg-architecture --query DEB_BUILD_ARCH_BITS)" \
-    && archFlag="$([ "$archBits" = '64' ] && echo '-Duse64bitall' || echo '-Duse64bitint')" \
-    && ./Configure -Darchname="$gnuArch" "$archFlag" -Accflags=-ggdb -DDEBUGGING -Dusethreads -Duselongdouble -Duseshrplib -Dvendorprefix=/usr/local -Aldflags='-Wl,-z,now -Wl,-zrelro -Wl,-z,noexecstack' -Accflags='-fpie -fPIC -fstack-protector-all -pie -D_FORTIFY_SOURCE=2' -Duseshrplib  -des \
-    && make -j$(nproc) \
-    && TEST_JOBS=$(nproc) make test_harness
-RUN make install \
-    && cd /usr/src \
-    && curl -LO https://www.cpan.org/authors/id/M/MI/MIYAGAWA/App-cpanminus-1.7044.tar.gz \
-    && echo '9b60767fe40752ef7a9d3f13f19060a63389a5c23acc3e9827e19b75500f81f3 *App-cpanminus-1.7044.tar.gz' | sha256sum -c - \
-    && tar -xzf App-cpanminus-1.7044.tar.gz && cd App-cpanminus-1.7044 && perl bin/cpanm . && cd /root \
-    && savedPackages="make netbase" \
-    && apt-mark auto '.*' > /dev/null \
-    && apt-mark manual $savedPackages \
-    && apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false \
-    && rm -fr /var/cache/apt/* /var/lib/apt/lists/* \
-    && rm -fr ./cpanm /root/.cpanm /usr/src/perl /usr/src/App-cpanminus-1.7044* /tmp/*
-
-WORKDIR /
-
-CMD ["perl5.20.3","-de0"]

5.020.003-main,debugging,longdouble,threaded-bullseye/fix-pack-longdouble.patch

@@ -1,41 +0,0 @@
-From a2db6c92fc2880ba1f288b6c4599a779997dd4e7 Mon Sep 17 00:00:00 2001
-From: Tony Cook <tony@develop-help.com>
-Date: Thu, 9 Apr 2015 15:45:16 +1000
-Subject: [PATCH] [perl #123971] fix long double pack padding on newer GCC
-
----
- pp_pack.c |   11 +++++++++++
- 1 file changed, 11 insertions(+)
-
-diff --git a/pp_pack.c b/pp_pack.c
-index 06adade..1d732a8 100644
---- a/pp_pack.c
-+++ b/pp_pack.c
-@@ -2709,6 +2709,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		anv.nv = sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(anv.bytes+10, sizeof(anv.bytes) - 10, U8);
-+#    endif
- #else
- 		anv.nv = SvNV(fromstr);
- #endif
-@@ -2726,6 +2732,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #  ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		aldouble.ld = (long double)sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(aldouble.bytes+10, sizeof(aldouble.bytes) - 10, U8);
-+#    endif
- #  else
- 		aldouble.ld = (long double)SvNV(fromstr);
- #  endif
--- 
-1.7.10.4
-
-

5.020.003-main,debugging,longdouble,threaded-buster/DevelPatchPerl.patch

@@ -1,281 +0,0 @@
-diff --git a/Configure b/Configure
-index 438b926..a762f78 100755
---- a/Configure
-+++ b/Configure
-@@ -4591,7 +4591,7 @@ else
- fi
- $rm -f try try.*
- case "$gccversion" in
--1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-+1.*) cpp=`./loc gcc-cpp $cpp $pth` ;;
- esac
- case "$gccversion" in
- '') gccosandvers='' ;;
-@@ -4631,7 +4631,7 @@ esac
- # gcc 3.* complain about adding -Idirectories that they already know about,
- # so we will take those off from locincpth.
- case "$gccversion" in
--3*)
-+3.*)
-     echo "main(){}">try.c
-     for incdir in $locincpth; do
-        warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
-@@ -5328,13 +5328,13 @@ fi
- case "$hint" in
- default|recommended)
- 	case "$gccversion" in
--	1*) dflt="$dflt -fpcc-struct-return" ;;
-+	1.*) dflt="$dflt -fpcc-struct-return" ;;
- 	esac
- 	case "$optimize:$DEBUGGING" in
- 	*-g*:old) dflt="$dflt -DDEBUGGING";;
- 	esac
- 	case "$gccversion" in
--	2*) if $test -d /etc/conf/kconfig.d &&
-+	2.*) if $test -d /etc/conf/kconfig.d &&
- 			$contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- 		then
- 			# Interactive Systems (ISC) POSIX mode.
-@@ -5343,7 +5343,7 @@ default|recommended)
- 		;;
- 	esac
- 	case "$gccversion" in
--	1*) ;;
-+	1.*) ;;
- 	2.[0-8]*) ;;
- 	?*)	set strict-aliasing -fno-strict-aliasing
- 		eval $checkccflag
-@@ -5445,7 +5445,7 @@ case "$cppflags" in
- *)  cppflags="$cppflags $ccflags" ;;
- esac
- case "$gccversion" in
--1*) cppflags="$cppflags -D__GNUC__"
-+1.*) cppflags="$cppflags -D__GNUC__"
- esac
- case "$mips_type" in
- '');;
-diff --git a/cpan/Time-Local/t/Local.t b/cpan/Time-Local/t/Local.t
-index 472e71a..0a852a0 100644
---- a/cpan/Time-Local/t/Local.t
-+++ b/cpan/Time-Local/t/Local.t
-@@ -91,7 +91,7 @@ for (@time, @neg_time) {
- 
-         # Test timelocal()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timelocal($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = localtime($time);
-@@ -107,7 +107,7 @@ for (@time, @neg_time) {
- 
-         # Test timegm()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timegm($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = gmtime($time);
-@@ -125,7 +125,6 @@ for (@time, @neg_time) {
- 
- for (@bad_time) {
-     my($year, $mon, $mday, $hour, $min, $sec) = @$_;
--    $year -= 1900;
-     $mon--;
- 
-     eval { timegm($sec,$min,$hour,$mday,$mon,$year) };
-@@ -134,14 +133,14 @@ for (@bad_time) {
- }
- 
- {
--    is(timelocal(0,0,1,1,0,90) - timelocal(0,0,0,1,0,90), 3600,
-+    is(timelocal(0,0,1,1,0,1990) - timelocal(0,0,0,1,0,1990), 3600,
-        'one hour difference between two calls to timelocal');
- 
--    is(timelocal(1,2,3,1,0,100) - timelocal(1,2,3,31,11,99), 24 * 3600,
-+    is(timelocal(1,2,3,1,0,2000) - timelocal(1,2,3,31,11,1999), 24 * 3600,
-        'one day difference between two calls to timelocal');
- 
-     # Diff beween Jan 1, 1980 and Mar 1, 1980 = (31 + 29 = 60 days)
--    is(timegm(0,0,0, 1, 2, 80) - timegm(0,0,0, 1, 0, 80), 60 * 24 * 3600,
-+    is(timegm(0,0,0, 1, 2, 1980) - timegm(0,0,0, 1, 0, 1980), 60 * 24 * 3600,
-        '60 day difference between two calls to timegm');
- }
- 
-diff --git a/hints/linux.sh b/hints/linux.sh
-index 956adfc..c749f0f 100644
---- a/hints/linux.sh
-+++ b/hints/linux.sh
-@@ -85,7 +85,7 @@ uname_minus_m="${uname_minus_m:-"$targetarch"}"
- 
- # Check if we're about to use Intel's ICC compiler
- case "`${cc:-cc} -V 2>&1`" in
--*"Intel(R) C++ Compiler"*|*"Intel(R) C Compiler"*)
-+*"Intel(R) C"*" Compiler"*)
-     # record the version, formats:
-     # icc (ICC) 10.1 20080801
-     # icpc (ICC) 10.1 20080801
-@@ -165,6 +165,9 @@ esac
- # plibpth to bypass this check.
- if [ -x /usr/bin/gcc ] ; then
-     gcc=/usr/bin/gcc
-+# clang also provides -print-search-dirs
-+elif ${cc:-cc} --version 2>/dev/null | grep -q '^clang ' ; then
-+    gcc=${cc:-cc}
- else
-     gcc=gcc
- fi
-@@ -178,6 +181,33 @@ case "$plibpth" in
-     ;;
- esac
- 
-+# For the musl libc, perl should #define _GNU_SOURCE.  Otherwise, some
-+# available functions, like memem, won't be used.  See the discussion in
-+# [perl #133760].  musl doesn't offer an easy way to identify it, but,
-+# at least on alpine linux, the ldd --version output contains the
-+# string 'musl.'
-+case `ldd --version 2>&1` in
-+    musl*)  ccflags="$ccflags -D_GNU_SOURCE" ;;
-+        *) ;;
-+esac
-+
-+# libquadmath is sometimes installed as gcc internal library,
-+# so contrary to our usual policy of *not* looking at gcc internal
-+# directories we now *do* look at them, in case they contain
-+# the quadmath library.
-+# XXX This may apply to other gcc internal libraries, if such exist.
-+# XXX This could be at Configure level, but then the $gcc is messy.
-+case "$usequadmath" in
-+"$define")
-+  for d in `LANG=C LC_ALL=C $gcc $ccflags $ldflags -print-search-dirs | grep libraries | cut -f2- -d= | tr ':' $trnl | grep 'gcc' | sed -e 's:/$::'`
-+  do
-+    case `ls $d/*libquadmath*$so* 2>/dev/null` in
-+    $d/*libquadmath*$so*) xlibpth="$xlibpth $d" ;;
-+    esac
-+  done
-+  ;;
-+esac
-+
- case "$libc" in
- '')
- # If you have glibc, then report the version for ./myconfig bug reporting.
-@@ -204,92 +234,6 @@ case "$libc" in
-     ;;
- esac
- 
--# Are we using ELF?  Thanks to Kenneth Albanowski <kjahds@kjahds.com>
--# for this test.
--cat >try.c <<'EOM'
--/* Test for whether ELF binaries are produced */
--#include <fcntl.h>
--#include <stdlib.h>
--#include <unistd.h>
--main() {
--	char buffer[4];
--	int i=open("a.out",O_RDONLY);
--	if(i==-1)
--		exit(1); /* fail */
--	if(read(i,&buffer[0],4)<4)
--		exit(1); /* fail */
--	if(buffer[0] != 127 || buffer[1] != 'E' ||
--           buffer[2] != 'L' || buffer[3] != 'F')
--		exit(1); /* fail */
--	exit(0); /* succeed (yes, it's ELF) */
--}
--EOM
--if ${cc:-gcc} $ccflags $ldflags try.c >/dev/null 2>&1 && $run ./a.out; then
--    cat <<'EOM' >&4
--
--You appear to have ELF support.  I'll try to use it for dynamic loading.
--If dynamic loading doesn't work, read hints/linux.sh for further information.
--EOM
--
--else
--    cat <<'EOM' >&4
--
--You don't have an ELF gcc.  I will use dld if possible.  If you are
--using a version of DLD earlier than 3.2.6, or don't have it at all, you
--should probably upgrade. If you are forced to use 3.2.4, you should
--uncomment a couple of lines in hints/linux.sh and restart Configure so
--that shared libraries will be disallowed.
--
--EOM
--    lddlflags="-r $lddlflags"
--    # These empty values are so that Configure doesn't put in the
--    # Linux ELF values.
--    ccdlflags=' '
--    cccdlflags=' '
--    ccflags="-DOVR_DBL_DIG=14 $ccflags"
--    so='sa'
--    dlext='o'
--    nm_so_opt=' '
--    ## If you are using DLD 3.2.4 which does not support shared libs,
--    ## uncomment the next two lines:
--    #ldflags="-static"
--    #so='none'
--
--	# In addition, on some systems there is a problem with perl and NDBM
--	# which causes AnyDBM and NDBM_File to lock up. This is evidenced
--	# in the tests as AnyDBM just freezing.  Apparently, this only
--	# happens on a.out systems, so we disable NDBM for all a.out linux
--	# systems.  If someone can suggest a more robust test
--	#  that would be appreciated.
--	#
--	# More info:
--	# Date: Wed, 7 Feb 1996 03:21:04 +0900
--	# From: Jeffrey Friedl <jfriedl@nff.ncl.omron.co.jp>
--	#
--	# I tried compiling with DBM support and sure enough things locked up
--	# just as advertised. Checking into it, I found that the lockup was
--	# during the call to dbm_open. Not *in* dbm_open -- but between the call
--	# to and the jump into.
--	#
--	# To make a long story short, making sure that the *.a and *.sa pairs of
--	#   /usr/lib/lib{m,db,gdbm}.{a,sa}
--	# were perfectly in sync took care of it.
--	#
--	# This will generate a harmless Whoa There! message
--	case "$d_dbm_open" in
--	'')	cat <<'EOM' >&4
--
--Disabling ndbm.  This will generate a Whoa There message in Configure.
--Read hints/linux.sh for further information.
--EOM
--		# You can override this with Configure -Dd_dbm_open
--		d_dbm_open=undef
--		;;
--	esac
--fi
--
--rm -f try.c a.out
--
- if ${sh:-/bin/sh} -c exit; then
-   echo ''
-   echo 'You appear to have a working bash.  Good.'
-@@ -497,7 +441,7 @@ then
-        DBLIB="$DBDIR/libdb.so"
-        if [ -f $DBLIB ]
-        then
--         if ${nm:-nm} -u $DBLIB | grep pthread >/dev/null
-+         if ${nm:-nm} -u $DBLIB 2>/dev/null | grep pthread >/dev/null
-          then
-            if ldd $DBLIB | grep pthread >/dev/null
-            then
-diff --git a/pp.c b/pp.c
-index 4ec6887..729239c 100644
---- a/pp.c
-+++ b/pp.c
-@@ -3435,8 +3435,12 @@ PP(pp_crypt)
- #if defined(__GLIBC__) || defined(__EMX__)
- 	if (PL_reentrant_buffer->_crypt_struct_buffer) {
- 	    PL_reentrant_buffer->_crypt_struct_buffer->initialized = 0;
--	    /* work around glibc-2.2.5 bug */
-+#if (defined(__GLIBC__) && __GLIBC__ == 2) && \
-+    (defined(__GLIBC_MINOR__) && __GLIBC_MINOR__ >= 2 && __GLIBC_MINOR__ < 4)
-+	    /* work around glibc-2.2.5 bug, has been fixed at some
-+	     * time in glibc-2.3.X */
- 	    PL_reentrant_buffer->_crypt_struct_buffer->current_saltbits = 0;
-+#endif
- 	}
- #endif
-     }

5.020.003-main,debugging,longdouble,threaded-buster/Dockerfile

@@ -1,59 +0,0 @@
-FROM debian:buster-backports
-LABEL maintainer="Ryan Voots <simcop@cpan.org>"
-
-COPY *.patch /usr/src/perl/
-WORKDIR /usr/src/perl
-
-ENV DEBIAN_FRONTEND=noninteractive
-
-RUN perl -i.bak -pE '$x=$_; $x=~s|^deb |deb-src |g;$_.=$x' /etc/apt/sources.list \
-    && apt update \
-    && apt -yq full-upgrade \
-    && apt -yq build-dep perl \
-    &&     apt-get install -y --no-install-recommends \
-       bzip2 \
-       ca-certificates \
-       # cpio \
-       curl \
-       dpkg-dev \
-       # file \
-       gcc \
-       # g++ \
-       libbz2-dev \
-       libdb-dev \
-       libc6-dev \
-       libgdbm-dev \
-       liblzma-dev \
-       make \
-       netbase \
-       patch \
-       procps \
-       zlib1g-dev \
-       xz-utils \
-    && curl -SL https://www.cpan.org/src/5.0/perl-5.20.3.tar.bz2 -o perl-5.20.3.tar.bz2 \
-    && echo '1b40068166c242e34a536836286e70b78410602a80615143301e52aa2901493b *perl-5.20.3.tar.bz2' | sha256sum -c -
-RUN tar --strip-components=1 -xaf perl-5.20.3.tar.bz2 -C /usr/src/perl \
-    && rm perl-5.20.3.tar.bz2 \
-    && cat *.patch | patch -p1 \
-    && echo 'print "1..0 # Skipped: Tests are invalid"' > /usr/src/perl/ext/GDBM_File/t/fatal.t
-RUN gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)" \
-    && archBits="$(dpkg-architecture --query DEB_BUILD_ARCH_BITS)" \
-    && archFlag="$([ "$archBits" = '64' ] && echo '-Duse64bitall' || echo '-Duse64bitint')" \
-    && ./Configure -Darchname="$gnuArch" "$archFlag" -Accflags=-ggdb -DDEBUGGING -Dusethreads -Duselongdouble -Duseshrplib -Dvendorprefix=/usr/local -Aldflags='-Wl,-z,now -Wl,-zrelro -Wl,-z,noexecstack' -Accflags='-fpie -fPIC -fstack-protector-all -pie -D_FORTIFY_SOURCE=2' -Duseshrplib  -des \
-    && make -j$(nproc) \
-    && TEST_JOBS=$(nproc) make test_harness
-RUN make install \
-    && cd /usr/src \
-    && curl -LO https://www.cpan.org/authors/id/M/MI/MIYAGAWA/App-cpanminus-1.7044.tar.gz \
-    && echo '9b60767fe40752ef7a9d3f13f19060a63389a5c23acc3e9827e19b75500f81f3 *App-cpanminus-1.7044.tar.gz' | sha256sum -c - \
-    && tar -xzf App-cpanminus-1.7044.tar.gz && cd App-cpanminus-1.7044 && perl bin/cpanm . && cd /root \
-    && savedPackages="make netbase" \
-    && apt-mark auto '.*' > /dev/null \
-    && apt-mark manual $savedPackages \
-    && apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false \
-    && rm -fr /var/cache/apt/* /var/lib/apt/lists/* \
-    && rm -fr ./cpanm /root/.cpanm /usr/src/perl /usr/src/App-cpanminus-1.7044* /tmp/*
-
-WORKDIR /
-
-CMD ["perl5.20.3","-de0"]

5.020.003-main,debugging,longdouble,threaded-buster/fix-pack-longdouble.patch

@@ -1,41 +0,0 @@
-From a2db6c92fc2880ba1f288b6c4599a779997dd4e7 Mon Sep 17 00:00:00 2001
-From: Tony Cook <tony@develop-help.com>
-Date: Thu, 9 Apr 2015 15:45:16 +1000
-Subject: [PATCH] [perl #123971] fix long double pack padding on newer GCC
-
----
- pp_pack.c |   11 +++++++++++
- 1 file changed, 11 insertions(+)
-
-diff --git a/pp_pack.c b/pp_pack.c
-index 06adade..1d732a8 100644
---- a/pp_pack.c
-+++ b/pp_pack.c
-@@ -2709,6 +2709,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		anv.nv = sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(anv.bytes+10, sizeof(anv.bytes) - 10, U8);
-+#    endif
- #else
- 		anv.nv = SvNV(fromstr);
- #endif
-@@ -2726,6 +2732,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #  ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		aldouble.ld = (long double)sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(aldouble.bytes+10, sizeof(aldouble.bytes) - 10, U8);
-+#    endif
- #  else
- 		aldouble.ld = (long double)SvNV(fromstr);
- #  endif
--- 
-1.7.10.4
-
-

5.020.003-main,debugging,longdouble-bullseye/DevelPatchPerl.patch

@@ -1,281 +0,0 @@
-diff --git a/Configure b/Configure
-index 438b926..a762f78 100755
---- a/Configure
-+++ b/Configure
-@@ -4591,7 +4591,7 @@ else
- fi
- $rm -f try try.*
- case "$gccversion" in
--1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-+1.*) cpp=`./loc gcc-cpp $cpp $pth` ;;
- esac
- case "$gccversion" in
- '') gccosandvers='' ;;
-@@ -4631,7 +4631,7 @@ esac
- # gcc 3.* complain about adding -Idirectories that they already know about,
- # so we will take those off from locincpth.
- case "$gccversion" in
--3*)
-+3.*)
-     echo "main(){}">try.c
-     for incdir in $locincpth; do
-        warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
-@@ -5328,13 +5328,13 @@ fi
- case "$hint" in
- default|recommended)
- 	case "$gccversion" in
--	1*) dflt="$dflt -fpcc-struct-return" ;;
-+	1.*) dflt="$dflt -fpcc-struct-return" ;;
- 	esac
- 	case "$optimize:$DEBUGGING" in
- 	*-g*:old) dflt="$dflt -DDEBUGGING";;
- 	esac
- 	case "$gccversion" in
--	2*) if $test -d /etc/conf/kconfig.d &&
-+	2.*) if $test -d /etc/conf/kconfig.d &&
- 			$contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- 		then
- 			# Interactive Systems (ISC) POSIX mode.
-@@ -5343,7 +5343,7 @@ default|recommended)
- 		;;
- 	esac
- 	case "$gccversion" in
--	1*) ;;
-+	1.*) ;;
- 	2.[0-8]*) ;;
- 	?*)	set strict-aliasing -fno-strict-aliasing
- 		eval $checkccflag
-@@ -5445,7 +5445,7 @@ case "$cppflags" in
- *)  cppflags="$cppflags $ccflags" ;;
- esac
- case "$gccversion" in
--1*) cppflags="$cppflags -D__GNUC__"
-+1.*) cppflags="$cppflags -D__GNUC__"
- esac
- case "$mips_type" in
- '');;
-diff --git a/cpan/Time-Local/t/Local.t b/cpan/Time-Local/t/Local.t
-index 472e71a..0a852a0 100644
---- a/cpan/Time-Local/t/Local.t
-+++ b/cpan/Time-Local/t/Local.t
-@@ -91,7 +91,7 @@ for (@time, @neg_time) {
- 
-         # Test timelocal()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timelocal($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = localtime($time);
-@@ -107,7 +107,7 @@ for (@time, @neg_time) {
- 
-         # Test timegm()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timegm($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = gmtime($time);
-@@ -125,7 +125,6 @@ for (@time, @neg_time) {
- 
- for (@bad_time) {
-     my($year, $mon, $mday, $hour, $min, $sec) = @$_;
--    $year -= 1900;
-     $mon--;
- 
-     eval { timegm($sec,$min,$hour,$mday,$mon,$year) };
-@@ -134,14 +133,14 @@ for (@bad_time) {
- }
- 
- {
--    is(timelocal(0,0,1,1,0,90) - timelocal(0,0,0,1,0,90), 3600,
-+    is(timelocal(0,0,1,1,0,1990) - timelocal(0,0,0,1,0,1990), 3600,
-        'one hour difference between two calls to timelocal');
- 
--    is(timelocal(1,2,3,1,0,100) - timelocal(1,2,3,31,11,99), 24 * 3600,
-+    is(timelocal(1,2,3,1,0,2000) - timelocal(1,2,3,31,11,1999), 24 * 3600,
-        'one day difference between two calls to timelocal');
- 
-     # Diff beween Jan 1, 1980 and Mar 1, 1980 = (31 + 29 = 60 days)
--    is(timegm(0,0,0, 1, 2, 80) - timegm(0,0,0, 1, 0, 80), 60 * 24 * 3600,
-+    is(timegm(0,0,0, 1, 2, 1980) - timegm(0,0,0, 1, 0, 1980), 60 * 24 * 3600,
-        '60 day difference between two calls to timegm');
- }
- 
-diff --git a/hints/linux.sh b/hints/linux.sh
-index 956adfc..c749f0f 100644
---- a/hints/linux.sh
-+++ b/hints/linux.sh
-@@ -85,7 +85,7 @@ uname_minus_m="${uname_minus_m:-"$targetarch"}"
- 
- # Check if we're about to use Intel's ICC compiler
- case "`${cc:-cc} -V 2>&1`" in
--*"Intel(R) C++ Compiler"*|*"Intel(R) C Compiler"*)
-+*"Intel(R) C"*" Compiler"*)
-     # record the version, formats:
-     # icc (ICC) 10.1 20080801
-     # icpc (ICC) 10.1 20080801
-@@ -165,6 +165,9 @@ esac
- # plibpth to bypass this check.
- if [ -x /usr/bin/gcc ] ; then
-     gcc=/usr/bin/gcc
-+# clang also provides -print-search-dirs
-+elif ${cc:-cc} --version 2>/dev/null | grep -q '^clang ' ; then
-+    gcc=${cc:-cc}
- else
-     gcc=gcc
- fi
-@@ -178,6 +181,33 @@ case "$plibpth" in
-     ;;
- esac
- 
-+# For the musl libc, perl should #define _GNU_SOURCE.  Otherwise, some
-+# available functions, like memem, won't be used.  See the discussion in
-+# [perl #133760].  musl doesn't offer an easy way to identify it, but,
-+# at least on alpine linux, the ldd --version output contains the
-+# string 'musl.'
-+case `ldd --version 2>&1` in
-+    musl*)  ccflags="$ccflags -D_GNU_SOURCE" ;;
-+        *) ;;
-+esac
-+
-+# libquadmath is sometimes installed as gcc internal library,
-+# so contrary to our usual policy of *not* looking at gcc internal
-+# directories we now *do* look at them, in case they contain
-+# the quadmath library.
-+# XXX This may apply to other gcc internal libraries, if such exist.
-+# XXX This could be at Configure level, but then the $gcc is messy.
-+case "$usequadmath" in
-+"$define")
-+  for d in `LANG=C LC_ALL=C $gcc $ccflags $ldflags -print-search-dirs | grep libraries | cut -f2- -d= | tr ':' $trnl | grep 'gcc' | sed -e 's:/$::'`
-+  do
-+    case `ls $d/*libquadmath*$so* 2>/dev/null` in
-+    $d/*libquadmath*$so*) xlibpth="$xlibpth $d" ;;
-+    esac
-+  done
-+  ;;
-+esac
-+
- case "$libc" in
- '')
- # If you have glibc, then report the version for ./myconfig bug reporting.
-@@ -204,92 +234,6 @@ case "$libc" in
-     ;;
- esac
- 
--# Are we using ELF?  Thanks to Kenneth Albanowski <kjahds@kjahds.com>
--# for this test.
--cat >try.c <<'EOM'
--/* Test for whether ELF binaries are produced */
--#include <fcntl.h>
--#include <stdlib.h>
--#include <unistd.h>
--main() {
--	char buffer[4];
--	int i=open("a.out",O_RDONLY);
--	if(i==-1)
--		exit(1); /* fail */
--	if(read(i,&buffer[0],4)<4)
--		exit(1); /* fail */
--	if(buffer[0] != 127 || buffer[1] != 'E' ||
--           buffer[2] != 'L' || buffer[3] != 'F')
--		exit(1); /* fail */
--	exit(0); /* succeed (yes, it's ELF) */
--}
--EOM
--if ${cc:-gcc} $ccflags $ldflags try.c >/dev/null 2>&1 && $run ./a.out; then
--    cat <<'EOM' >&4
--
--You appear to have ELF support.  I'll try to use it for dynamic loading.
--If dynamic loading doesn't work, read hints/linux.sh for further information.
--EOM
--
--else
--    cat <<'EOM' >&4
--
--You don't have an ELF gcc.  I will use dld if possible.  If you are
--using a version of DLD earlier than 3.2.6, or don't have it at all, you
--should probably upgrade. If you are forced to use 3.2.4, you should
--uncomment a couple of lines in hints/linux.sh and restart Configure so
--that shared libraries will be disallowed.
--
--EOM
--    lddlflags="-r $lddlflags"
--    # These empty values are so that Configure doesn't put in the
--    # Linux ELF values.
--    ccdlflags=' '
--    cccdlflags=' '
--    ccflags="-DOVR_DBL_DIG=14 $ccflags"
--    so='sa'
--    dlext='o'
--    nm_so_opt=' '
--    ## If you are using DLD 3.2.4 which does not support shared libs,
--    ## uncomment the next two lines:
--    #ldflags="-static"
--    #so='none'
--
--	# In addition, on some systems there is a problem with perl and NDBM
--	# which causes AnyDBM and NDBM_File to lock up. This is evidenced
--	# in the tests as AnyDBM just freezing.  Apparently, this only
--	# happens on a.out systems, so we disable NDBM for all a.out linux
--	# systems.  If someone can suggest a more robust test
--	#  that would be appreciated.
--	#
--	# More info:
--	# Date: Wed, 7 Feb 1996 03:21:04 +0900
--	# From: Jeffrey Friedl <jfriedl@nff.ncl.omron.co.jp>
--	#
--	# I tried compiling with DBM support and sure enough things locked up
--	# just as advertised. Checking into it, I found that the lockup was
--	# during the call to dbm_open. Not *in* dbm_open -- but between the call
--	# to and the jump into.
--	#
--	# To make a long story short, making sure that the *.a and *.sa pairs of
--	#   /usr/lib/lib{m,db,gdbm}.{a,sa}
--	# were perfectly in sync took care of it.
--	#
--	# This will generate a harmless Whoa There! message
--	case "$d_dbm_open" in
--	'')	cat <<'EOM' >&4
--
--Disabling ndbm.  This will generate a Whoa There message in Configure.
--Read hints/linux.sh for further information.
--EOM
--		# You can override this with Configure -Dd_dbm_open
--		d_dbm_open=undef
--		;;
--	esac
--fi
--
--rm -f try.c a.out
--
- if ${sh:-/bin/sh} -c exit; then
-   echo ''
-   echo 'You appear to have a working bash.  Good.'
-@@ -497,7 +441,7 @@ then
-        DBLIB="$DBDIR/libdb.so"
-        if [ -f $DBLIB ]
-        then
--         if ${nm:-nm} -u $DBLIB | grep pthread >/dev/null
-+         if ${nm:-nm} -u $DBLIB 2>/dev/null | grep pthread >/dev/null
-          then
-            if ldd $DBLIB | grep pthread >/dev/null
-            then
-diff --git a/pp.c b/pp.c
-index 4ec6887..729239c 100644
---- a/pp.c
-+++ b/pp.c
-@@ -3435,8 +3435,12 @@ PP(pp_crypt)
- #if defined(__GLIBC__) || defined(__EMX__)
- 	if (PL_reentrant_buffer->_crypt_struct_buffer) {
- 	    PL_reentrant_buffer->_crypt_struct_buffer->initialized = 0;
--	    /* work around glibc-2.2.5 bug */
-+#if (defined(__GLIBC__) && __GLIBC__ == 2) && \
-+    (defined(__GLIBC_MINOR__) && __GLIBC_MINOR__ >= 2 && __GLIBC_MINOR__ < 4)
-+	    /* work around glibc-2.2.5 bug, has been fixed at some
-+	     * time in glibc-2.3.X */
- 	    PL_reentrant_buffer->_crypt_struct_buffer->current_saltbits = 0;
-+#endif
- 	}
- #endif
-     }

5.020.003-main,debugging,longdouble-bullseye/Dockerfile

@@ -1,59 +0,0 @@
-FROM debian:bullseye-backports
-LABEL maintainer="Ryan Voots <simcop@cpan.org>"
-
-COPY *.patch /usr/src/perl/
-WORKDIR /usr/src/perl
-
-ENV DEBIAN_FRONTEND=noninteractive
-
-RUN perl -i.bak -pE '$x=$_; $x=~s|^deb |deb-src |g;$_.=$x' /etc/apt/sources.list \
-    && apt update \
-    && apt -yq full-upgrade \
-    && apt -yq build-dep perl \
-    &&     apt-get install -y --no-install-recommends \
-       bzip2 \
-       ca-certificates \
-       # cpio \
-       curl \
-       dpkg-dev \
-       # file \
-       gcc \
-       # g++ \
-       libbz2-dev \
-       libdb-dev \
-       libc6-dev \
-       libgdbm-dev \
-       liblzma-dev \
-       make \
-       netbase \
-       patch \
-       procps \
-       zlib1g-dev \
-       xz-utils \
-    && curl -SL https://www.cpan.org/src/5.0/perl-5.20.3.tar.bz2 -o perl-5.20.3.tar.bz2 \
-    && echo '1b40068166c242e34a536836286e70b78410602a80615143301e52aa2901493b *perl-5.20.3.tar.bz2' | sha256sum -c -
-RUN tar --strip-components=1 -xaf perl-5.20.3.tar.bz2 -C /usr/src/perl \
-    && rm perl-5.20.3.tar.bz2 \
-    && cat *.patch | patch -p1 \
-    && echo 'print "1..0 # Skipped: Tests are invalid"' > /usr/src/perl/ext/GDBM_File/t/fatal.t
-RUN gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)" \
-    && archBits="$(dpkg-architecture --query DEB_BUILD_ARCH_BITS)" \
-    && archFlag="$([ "$archBits" = '64' ] && echo '-Duse64bitall' || echo '-Duse64bitint')" \
-    && ./Configure -Darchname="$gnuArch" "$archFlag" -Accflags=-ggdb -DDEBUGGING -Duselongdouble -Duseshrplib -Dvendorprefix=/usr/local -Aldflags='-Wl,-z,now -Wl,-zrelro -Wl,-z,noexecstack' -Accflags='-fpie -fPIC -fstack-protector-all -pie -D_FORTIFY_SOURCE=2' -Duseshrplib  -des \
-    && make -j$(nproc) \
-    && TEST_JOBS=$(nproc) make test_harness
-RUN make install \
-    && cd /usr/src \
-    && curl -LO https://www.cpan.org/authors/id/M/MI/MIYAGAWA/App-cpanminus-1.7044.tar.gz \
-    && echo '9b60767fe40752ef7a9d3f13f19060a63389a5c23acc3e9827e19b75500f81f3 *App-cpanminus-1.7044.tar.gz' | sha256sum -c - \
-    && tar -xzf App-cpanminus-1.7044.tar.gz && cd App-cpanminus-1.7044 && perl bin/cpanm . && cd /root \
-    && savedPackages="make netbase" \
-    && apt-mark auto '.*' > /dev/null \
-    && apt-mark manual $savedPackages \
-    && apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false \
-    && rm -fr /var/cache/apt/* /var/lib/apt/lists/* \
-    && rm -fr ./cpanm /root/.cpanm /usr/src/perl /usr/src/App-cpanminus-1.7044* /tmp/*
-
-WORKDIR /
-
-CMD ["perl5.20.3","-de0"]

5.020.003-main,debugging,longdouble-bullseye/fix-pack-longdouble.patch

@@ -1,41 +0,0 @@
-From a2db6c92fc2880ba1f288b6c4599a779997dd4e7 Mon Sep 17 00:00:00 2001
-From: Tony Cook <tony@develop-help.com>
-Date: Thu, 9 Apr 2015 15:45:16 +1000
-Subject: [PATCH] [perl #123971] fix long double pack padding on newer GCC
-
----
- pp_pack.c |   11 +++++++++++
- 1 file changed, 11 insertions(+)
-
-diff --git a/pp_pack.c b/pp_pack.c
-index 06adade..1d732a8 100644
---- a/pp_pack.c
-+++ b/pp_pack.c
-@@ -2709,6 +2709,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		anv.nv = sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(anv.bytes+10, sizeof(anv.bytes) - 10, U8);
-+#    endif
- #else
- 		anv.nv = SvNV(fromstr);
- #endif
-@@ -2726,6 +2732,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #  ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		aldouble.ld = (long double)sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(aldouble.bytes+10, sizeof(aldouble.bytes) - 10, U8);
-+#    endif
- #  else
- 		aldouble.ld = (long double)SvNV(fromstr);
- #  endif
--- 
-1.7.10.4
-
-

5.020.003-main,debugging,longdouble-buster/DevelPatchPerl.patch

@@ -1,281 +0,0 @@
-diff --git a/Configure b/Configure
-index 438b926..a762f78 100755
---- a/Configure
-+++ b/Configure
-@@ -4591,7 +4591,7 @@ else
- fi
- $rm -f try try.*
- case "$gccversion" in
--1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-+1.*) cpp=`./loc gcc-cpp $cpp $pth` ;;
- esac
- case "$gccversion" in
- '') gccosandvers='' ;;
-@@ -4631,7 +4631,7 @@ esac
- # gcc 3.* complain about adding -Idirectories that they already know about,
- # so we will take those off from locincpth.
- case "$gccversion" in
--3*)
-+3.*)
-     echo "main(){}">try.c
-     for incdir in $locincpth; do
-        warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
-@@ -5328,13 +5328,13 @@ fi
- case "$hint" in
- default|recommended)
- 	case "$gccversion" in
--	1*) dflt="$dflt -fpcc-struct-return" ;;
-+	1.*) dflt="$dflt -fpcc-struct-return" ;;
- 	esac
- 	case "$optimize:$DEBUGGING" in
- 	*-g*:old) dflt="$dflt -DDEBUGGING";;
- 	esac
- 	case "$gccversion" in
--	2*) if $test -d /etc/conf/kconfig.d &&
-+	2.*) if $test -d /etc/conf/kconfig.d &&
- 			$contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- 		then
- 			# Interactive Systems (ISC) POSIX mode.
-@@ -5343,7 +5343,7 @@ default|recommended)
- 		;;
- 	esac
- 	case "$gccversion" in
--	1*) ;;
-+	1.*) ;;
- 	2.[0-8]*) ;;
- 	?*)	set strict-aliasing -fno-strict-aliasing
- 		eval $checkccflag
-@@ -5445,7 +5445,7 @@ case "$cppflags" in
- *)  cppflags="$cppflags $ccflags" ;;
- esac
- case "$gccversion" in
--1*) cppflags="$cppflags -D__GNUC__"
-+1.*) cppflags="$cppflags -D__GNUC__"
- esac
- case "$mips_type" in
- '');;
-diff --git a/cpan/Time-Local/t/Local.t b/cpan/Time-Local/t/Local.t
-index 472e71a..0a852a0 100644
---- a/cpan/Time-Local/t/Local.t
-+++ b/cpan/Time-Local/t/Local.t
-@@ -91,7 +91,7 @@ for (@time, @neg_time) {
- 
-         # Test timelocal()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timelocal($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = localtime($time);
-@@ -107,7 +107,7 @@ for (@time, @neg_time) {
- 
-         # Test timegm()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timegm($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = gmtime($time);
-@@ -125,7 +125,6 @@ for (@time, @neg_time) {
- 
- for (@bad_time) {
-     my($year, $mon, $mday, $hour, $min, $sec) = @$_;
--    $year -= 1900;
-     $mon--;
- 
-     eval { timegm($sec,$min,$hour,$mday,$mon,$year) };
-@@ -134,14 +133,14 @@ for (@bad_time) {
- }
- 
- {
--    is(timelocal(0,0,1,1,0,90) - timelocal(0,0,0,1,0,90), 3600,
-+    is(timelocal(0,0,1,1,0,1990) - timelocal(0,0,0,1,0,1990), 3600,
-        'one hour difference between two calls to timelocal');
- 
--    is(timelocal(1,2,3,1,0,100) - timelocal(1,2,3,31,11,99), 24 * 3600,
-+    is(timelocal(1,2,3,1,0,2000) - timelocal(1,2,3,31,11,1999), 24 * 3600,
-        'one day difference between two calls to timelocal');
- 
-     # Diff beween Jan 1, 1980 and Mar 1, 1980 = (31 + 29 = 60 days)
--    is(timegm(0,0,0, 1, 2, 80) - timegm(0,0,0, 1, 0, 80), 60 * 24 * 3600,
-+    is(timegm(0,0,0, 1, 2, 1980) - timegm(0,0,0, 1, 0, 1980), 60 * 24 * 3600,
-        '60 day difference between two calls to timegm');
- }
- 
-diff --git a/hints/linux.sh b/hints/linux.sh
-index 956adfc..c749f0f 100644
---- a/hints/linux.sh
-+++ b/hints/linux.sh
-@@ -85,7 +85,7 @@ uname_minus_m="${uname_minus_m:-"$targetarch"}"
- 
- # Check if we're about to use Intel's ICC compiler
- case "`${cc:-cc} -V 2>&1`" in
--*"Intel(R) C++ Compiler"*|*"Intel(R) C Compiler"*)
-+*"Intel(R) C"*" Compiler"*)
-     # record the version, formats:
-     # icc (ICC) 10.1 20080801
-     # icpc (ICC) 10.1 20080801
-@@ -165,6 +165,9 @@ esac
- # plibpth to bypass this check.
- if [ -x /usr/bin/gcc ] ; then
-     gcc=/usr/bin/gcc
-+# clang also provides -print-search-dirs
-+elif ${cc:-cc} --version 2>/dev/null | grep -q '^clang ' ; then
-+    gcc=${cc:-cc}
- else
-     gcc=gcc
- fi
-@@ -178,6 +181,33 @@ case "$plibpth" in
-     ;;
- esac
- 
-+# For the musl libc, perl should #define _GNU_SOURCE.  Otherwise, some
-+# available functions, like memem, won't be used.  See the discussion in
-+# [perl #133760].  musl doesn't offer an easy way to identify it, but,
-+# at least on alpine linux, the ldd --version output contains the
-+# string 'musl.'
-+case `ldd --version 2>&1` in
-+    musl*)  ccflags="$ccflags -D_GNU_SOURCE" ;;
-+        *) ;;
-+esac
-+
-+# libquadmath is sometimes installed as gcc internal library,
-+# so contrary to our usual policy of *not* looking at gcc internal
-+# directories we now *do* look at them, in case they contain
-+# the quadmath library.
-+# XXX This may apply to other gcc internal libraries, if such exist.
-+# XXX This could be at Configure level, but then the $gcc is messy.
-+case "$usequadmath" in
-+"$define")
-+  for d in `LANG=C LC_ALL=C $gcc $ccflags $ldflags -print-search-dirs | grep libraries | cut -f2- -d= | tr ':' $trnl | grep 'gcc' | sed -e 's:/$::'`
-+  do
-+    case `ls $d/*libquadmath*$so* 2>/dev/null` in
-+    $d/*libquadmath*$so*) xlibpth="$xlibpth $d" ;;
-+    esac
-+  done
-+  ;;
-+esac
-+
- case "$libc" in
- '')
- # If you have glibc, then report the version for ./myconfig bug reporting.
-@@ -204,92 +234,6 @@ case "$libc" in
-     ;;
- esac
- 
--# Are we using ELF?  Thanks to Kenneth Albanowski <kjahds@kjahds.com>
--# for this test.
--cat >try.c <<'EOM'
--/* Test for whether ELF binaries are produced */
--#include <fcntl.h>
--#include <stdlib.h>
--#include <unistd.h>
--main() {
--	char buffer[4];
--	int i=open("a.out",O_RDONLY);
--	if(i==-1)
--		exit(1); /* fail */
--	if(read(i,&buffer[0],4)<4)
--		exit(1); /* fail */
--	if(buffer[0] != 127 || buffer[1] != 'E' ||
--           buffer[2] != 'L' || buffer[3] != 'F')
--		exit(1); /* fail */
--	exit(0); /* succeed (yes, it's ELF) */
--}
--EOM
--if ${cc:-gcc} $ccflags $ldflags try.c >/dev/null 2>&1 && $run ./a.out; then
--    cat <<'EOM' >&4
--
--You appear to have ELF support.  I'll try to use it for dynamic loading.
--If dynamic loading doesn't work, read hints/linux.sh for further information.
--EOM
--
--else
--    cat <<'EOM' >&4
--
--You don't have an ELF gcc.  I will use dld if possible.  If you are
--using a version of DLD earlier than 3.2.6, or don't have it at all, you
--should probably upgrade. If you are forced to use 3.2.4, you should
--uncomment a couple of lines in hints/linux.sh and restart Configure so
--that shared libraries will be disallowed.
--
--EOM
--    lddlflags="-r $lddlflags"
--    # These empty values are so that Configure doesn't put in the
--    # Linux ELF values.
--    ccdlflags=' '
--    cccdlflags=' '
--    ccflags="-DOVR_DBL_DIG=14 $ccflags"
--    so='sa'
--    dlext='o'
--    nm_so_opt=' '
--    ## If you are using DLD 3.2.4 which does not support shared libs,
--    ## uncomment the next two lines:
--    #ldflags="-static"
--    #so='none'
--
--	# In addition, on some systems there is a problem with perl and NDBM
--	# which causes AnyDBM and NDBM_File to lock up. This is evidenced
--	# in the tests as AnyDBM just freezing.  Apparently, this only
--	# happens on a.out systems, so we disable NDBM for all a.out linux
--	# systems.  If someone can suggest a more robust test
--	#  that would be appreciated.
--	#
--	# More info:
--	# Date: Wed, 7 Feb 1996 03:21:04 +0900
--	# From: Jeffrey Friedl <jfriedl@nff.ncl.omron.co.jp>
--	#
--	# I tried compiling with DBM support and sure enough things locked up
--	# just as advertised. Checking into it, I found that the lockup was
--	# during the call to dbm_open. Not *in* dbm_open -- but between the call
--	# to and the jump into.
--	#
--	# To make a long story short, making sure that the *.a and *.sa pairs of
--	#   /usr/lib/lib{m,db,gdbm}.{a,sa}
--	# were perfectly in sync took care of it.
--	#
--	# This will generate a harmless Whoa There! message
--	case "$d_dbm_open" in
--	'')	cat <<'EOM' >&4
--
--Disabling ndbm.  This will generate a Whoa There message in Configure.
--Read hints/linux.sh for further information.
--EOM
--		# You can override this with Configure -Dd_dbm_open
--		d_dbm_open=undef
--		;;
--	esac
--fi
--
--rm -f try.c a.out
--
- if ${sh:-/bin/sh} -c exit; then
-   echo ''
-   echo 'You appear to have a working bash.  Good.'
-@@ -497,7 +441,7 @@ then
-        DBLIB="$DBDIR/libdb.so"
-        if [ -f $DBLIB ]
-        then
--         if ${nm:-nm} -u $DBLIB | grep pthread >/dev/null
-+         if ${nm:-nm} -u $DBLIB 2>/dev/null | grep pthread >/dev/null
-          then
-            if ldd $DBLIB | grep pthread >/dev/null
-            then
-diff --git a/pp.c b/pp.c
-index 4ec6887..729239c 100644
---- a/pp.c
-+++ b/pp.c
-@@ -3435,8 +3435,12 @@ PP(pp_crypt)
- #if defined(__GLIBC__) || defined(__EMX__)
- 	if (PL_reentrant_buffer->_crypt_struct_buffer) {
- 	    PL_reentrant_buffer->_crypt_struct_buffer->initialized = 0;
--	    /* work around glibc-2.2.5 bug */
-+#if (defined(__GLIBC__) && __GLIBC__ == 2) && \
-+    (defined(__GLIBC_MINOR__) && __GLIBC_MINOR__ >= 2 && __GLIBC_MINOR__ < 4)
-+	    /* work around glibc-2.2.5 bug, has been fixed at some
-+	     * time in glibc-2.3.X */
- 	    PL_reentrant_buffer->_crypt_struct_buffer->current_saltbits = 0;
-+#endif
- 	}
- #endif
-     }

5.020.003-main,debugging,longdouble-buster/Dockerfile

@@ -1,59 +0,0 @@
-FROM debian:buster-backports
-LABEL maintainer="Ryan Voots <simcop@cpan.org>"
-
-COPY *.patch /usr/src/perl/
-WORKDIR /usr/src/perl
-
-ENV DEBIAN_FRONTEND=noninteractive
-
-RUN perl -i.bak -pE '$x=$_; $x=~s|^deb |deb-src |g;$_.=$x' /etc/apt/sources.list \
-    && apt update \
-    && apt -yq full-upgrade \
-    && apt -yq build-dep perl \
-    &&     apt-get install -y --no-install-recommends \
-       bzip2 \
-       ca-certificates \
-       # cpio \
-       curl \
-       dpkg-dev \
-       # file \
-       gcc \
-       # g++ \
-       libbz2-dev \
-       libdb-dev \
-       libc6-dev \
-       libgdbm-dev \
-       liblzma-dev \
-       make \
-       netbase \
-       patch \
-       procps \
-       zlib1g-dev \
-       xz-utils \
-    && curl -SL https://www.cpan.org/src/5.0/perl-5.20.3.tar.bz2 -o perl-5.20.3.tar.bz2 \
-    && echo '1b40068166c242e34a536836286e70b78410602a80615143301e52aa2901493b *perl-5.20.3.tar.bz2' | sha256sum -c -
-RUN tar --strip-components=1 -xaf perl-5.20.3.tar.bz2 -C /usr/src/perl \
-    && rm perl-5.20.3.tar.bz2 \
-    && cat *.patch | patch -p1 \
-    && echo 'print "1..0 # Skipped: Tests are invalid"' > /usr/src/perl/ext/GDBM_File/t/fatal.t
-RUN gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)" \
-    && archBits="$(dpkg-architecture --query DEB_BUILD_ARCH_BITS)" \
-    && archFlag="$([ "$archBits" = '64' ] && echo '-Duse64bitall' || echo '-Duse64bitint')" \
-    && ./Configure -Darchname="$gnuArch" "$archFlag" -Accflags=-ggdb -DDEBUGGING -Duselongdouble -Duseshrplib -Dvendorprefix=/usr/local -Aldflags='-Wl,-z,now -Wl,-zrelro -Wl,-z,noexecstack' -Accflags='-fpie -fPIC -fstack-protector-all -pie -D_FORTIFY_SOURCE=2' -Duseshrplib  -des \
-    && make -j$(nproc) \
-    && TEST_JOBS=$(nproc) make test_harness
-RUN make install \
-    && cd /usr/src \
-    && curl -LO https://www.cpan.org/authors/id/M/MI/MIYAGAWA/App-cpanminus-1.7044.tar.gz \
-    && echo '9b60767fe40752ef7a9d3f13f19060a63389a5c23acc3e9827e19b75500f81f3 *App-cpanminus-1.7044.tar.gz' | sha256sum -c - \
-    && tar -xzf App-cpanminus-1.7044.tar.gz && cd App-cpanminus-1.7044 && perl bin/cpanm . && cd /root \
-    && savedPackages="make netbase" \
-    && apt-mark auto '.*' > /dev/null \
-    && apt-mark manual $savedPackages \
-    && apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false \
-    && rm -fr /var/cache/apt/* /var/lib/apt/lists/* \
-    && rm -fr ./cpanm /root/.cpanm /usr/src/perl /usr/src/App-cpanminus-1.7044* /tmp/*
-
-WORKDIR /
-
-CMD ["perl5.20.3","-de0"]

5.020.003-main,debugging,longdouble-buster/fix-pack-longdouble.patch

@@ -1,41 +0,0 @@
-From a2db6c92fc2880ba1f288b6c4599a779997dd4e7 Mon Sep 17 00:00:00 2001
-From: Tony Cook <tony@develop-help.com>
-Date: Thu, 9 Apr 2015 15:45:16 +1000
-Subject: [PATCH] [perl #123971] fix long double pack padding on newer GCC
-
----
- pp_pack.c |   11 +++++++++++
- 1 file changed, 11 insertions(+)
-
-diff --git a/pp_pack.c b/pp_pack.c
-index 06adade..1d732a8 100644
---- a/pp_pack.c
-+++ b/pp_pack.c
-@@ -2709,6 +2709,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		anv.nv = sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(anv.bytes+10, sizeof(anv.bytes) - 10, U8);
-+#    endif
- #else
- 		anv.nv = SvNV(fromstr);
- #endif
-@@ -2726,6 +2732,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #  ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		aldouble.ld = (long double)sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(aldouble.bytes+10, sizeof(aldouble.bytes) - 10, U8);
-+#    endif
- #  else
- 		aldouble.ld = (long double)SvNV(fromstr);
- #  endif
--- 
-1.7.10.4
-
-

5.020.003-main,debugging,quadmath,threaded-bullseye/DevelPatchPerl.patch

@@ -1,281 +0,0 @@
-diff --git a/Configure b/Configure
-index 438b926..a762f78 100755
---- a/Configure
-+++ b/Configure
-@@ -4591,7 +4591,7 @@ else
- fi
- $rm -f try try.*
- case "$gccversion" in
--1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-+1.*) cpp=`./loc gcc-cpp $cpp $pth` ;;
- esac
- case "$gccversion" in
- '') gccosandvers='' ;;
-@@ -4631,7 +4631,7 @@ esac
- # gcc 3.* complain about adding -Idirectories that they already know about,
- # so we will take those off from locincpth.
- case "$gccversion" in
--3*)
-+3.*)
-     echo "main(){}">try.c
-     for incdir in $locincpth; do
-        warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
-@@ -5328,13 +5328,13 @@ fi
- case "$hint" in
- default|recommended)
- 	case "$gccversion" in
--	1*) dflt="$dflt -fpcc-struct-return" ;;
-+	1.*) dflt="$dflt -fpcc-struct-return" ;;
- 	esac
- 	case "$optimize:$DEBUGGING" in
- 	*-g*:old) dflt="$dflt -DDEBUGGING";;
- 	esac
- 	case "$gccversion" in
--	2*) if $test -d /etc/conf/kconfig.d &&
-+	2.*) if $test -d /etc/conf/kconfig.d &&
- 			$contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- 		then
- 			# Interactive Systems (ISC) POSIX mode.
-@@ -5343,7 +5343,7 @@ default|recommended)
- 		;;
- 	esac
- 	case "$gccversion" in
--	1*) ;;
-+	1.*) ;;
- 	2.[0-8]*) ;;
- 	?*)	set strict-aliasing -fno-strict-aliasing
- 		eval $checkccflag
-@@ -5445,7 +5445,7 @@ case "$cppflags" in
- *)  cppflags="$cppflags $ccflags" ;;
- esac
- case "$gccversion" in
--1*) cppflags="$cppflags -D__GNUC__"
-+1.*) cppflags="$cppflags -D__GNUC__"
- esac
- case "$mips_type" in
- '');;
-diff --git a/cpan/Time-Local/t/Local.t b/cpan/Time-Local/t/Local.t
-index 472e71a..0a852a0 100644
---- a/cpan/Time-Local/t/Local.t
-+++ b/cpan/Time-Local/t/Local.t
-@@ -91,7 +91,7 @@ for (@time, @neg_time) {
- 
-         # Test timelocal()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timelocal($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = localtime($time);
-@@ -107,7 +107,7 @@ for (@time, @neg_time) {
- 
-         # Test timegm()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timegm($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = gmtime($time);
-@@ -125,7 +125,6 @@ for (@time, @neg_time) {
- 
- for (@bad_time) {
-     my($year, $mon, $mday, $hour, $min, $sec) = @$_;
--    $year -= 1900;
-     $mon--;
- 
-     eval { timegm($sec,$min,$hour,$mday,$mon,$year) };
-@@ -134,14 +133,14 @@ for (@bad_time) {
- }
- 
- {
--    is(timelocal(0,0,1,1,0,90) - timelocal(0,0,0,1,0,90), 3600,
-+    is(timelocal(0,0,1,1,0,1990) - timelocal(0,0,0,1,0,1990), 3600,
-        'one hour difference between two calls to timelocal');
- 
--    is(timelocal(1,2,3,1,0,100) - timelocal(1,2,3,31,11,99), 24 * 3600,
-+    is(timelocal(1,2,3,1,0,2000) - timelocal(1,2,3,31,11,1999), 24 * 3600,
-        'one day difference between two calls to timelocal');
- 
-     # Diff beween Jan 1, 1980 and Mar 1, 1980 = (31 + 29 = 60 days)
--    is(timegm(0,0,0, 1, 2, 80) - timegm(0,0,0, 1, 0, 80), 60 * 24 * 3600,
-+    is(timegm(0,0,0, 1, 2, 1980) - timegm(0,0,0, 1, 0, 1980), 60 * 24 * 3600,
-        '60 day difference between two calls to timegm');
- }
- 
-diff --git a/hints/linux.sh b/hints/linux.sh
-index 956adfc..c749f0f 100644
---- a/hints/linux.sh
-+++ b/hints/linux.sh
-@@ -85,7 +85,7 @@ uname_minus_m="${uname_minus_m:-"$targetarch"}"
- 
- # Check if we're about to use Intel's ICC compiler
- case "`${cc:-cc} -V 2>&1`" in
--*"Intel(R) C++ Compiler"*|*"Intel(R) C Compiler"*)
-+*"Intel(R) C"*" Compiler"*)
-     # record the version, formats:
-     # icc (ICC) 10.1 20080801
-     # icpc (ICC) 10.1 20080801
-@@ -165,6 +165,9 @@ esac
- # plibpth to bypass this check.
- if [ -x /usr/bin/gcc ] ; then
-     gcc=/usr/bin/gcc
-+# clang also provides -print-search-dirs
-+elif ${cc:-cc} --version 2>/dev/null | grep -q '^clang ' ; then
-+    gcc=${cc:-cc}
- else
-     gcc=gcc
- fi
-@@ -178,6 +181,33 @@ case "$plibpth" in
-     ;;
- esac
- 
-+# For the musl libc, perl should #define _GNU_SOURCE.  Otherwise, some
-+# available functions, like memem, won't be used.  See the discussion in
-+# [perl #133760].  musl doesn't offer an easy way to identify it, but,
-+# at least on alpine linux, the ldd --version output contains the
-+# string 'musl.'
-+case `ldd --version 2>&1` in
-+    musl*)  ccflags="$ccflags -D_GNU_SOURCE" ;;
-+        *) ;;
-+esac
-+
-+# libquadmath is sometimes installed as gcc internal library,
-+# so contrary to our usual policy of *not* looking at gcc internal
-+# directories we now *do* look at them, in case they contain
-+# the quadmath library.
-+# XXX This may apply to other gcc internal libraries, if such exist.
-+# XXX This could be at Configure level, but then the $gcc is messy.
-+case "$usequadmath" in
-+"$define")
-+  for d in `LANG=C LC_ALL=C $gcc $ccflags $ldflags -print-search-dirs | grep libraries | cut -f2- -d= | tr ':' $trnl | grep 'gcc' | sed -e 's:/$::'`
-+  do
-+    case `ls $d/*libquadmath*$so* 2>/dev/null` in
-+    $d/*libquadmath*$so*) xlibpth="$xlibpth $d" ;;
-+    esac
-+  done
-+  ;;
-+esac
-+
- case "$libc" in
- '')
- # If you have glibc, then report the version for ./myconfig bug reporting.
-@@ -204,92 +234,6 @@ case "$libc" in
-     ;;
- esac
- 
--# Are we using ELF?  Thanks to Kenneth Albanowski <kjahds@kjahds.com>
--# for this test.
--cat >try.c <<'EOM'
--/* Test for whether ELF binaries are produced */
--#include <fcntl.h>
--#include <stdlib.h>
--#include <unistd.h>
--main() {
--	char buffer[4];
--	int i=open("a.out",O_RDONLY);
--	if(i==-1)
--		exit(1); /* fail */
--	if(read(i,&buffer[0],4)<4)
--		exit(1); /* fail */
--	if(buffer[0] != 127 || buffer[1] != 'E' ||
--           buffer[2] != 'L' || buffer[3] != 'F')
--		exit(1); /* fail */
--	exit(0); /* succeed (yes, it's ELF) */
--}
--EOM
--if ${cc:-gcc} $ccflags $ldflags try.c >/dev/null 2>&1 && $run ./a.out; then
--    cat <<'EOM' >&4
--
--You appear to have ELF support.  I'll try to use it for dynamic loading.
--If dynamic loading doesn't work, read hints/linux.sh for further information.
--EOM
--
--else
--    cat <<'EOM' >&4
--
--You don't have an ELF gcc.  I will use dld if possible.  If you are
--using a version of DLD earlier than 3.2.6, or don't have it at all, you
--should probably upgrade. If you are forced to use 3.2.4, you should
--uncomment a couple of lines in hints/linux.sh and restart Configure so
--that shared libraries will be disallowed.
--
--EOM
--    lddlflags="-r $lddlflags"
--    # These empty values are so that Configure doesn't put in the
--    # Linux ELF values.
--    ccdlflags=' '
--    cccdlflags=' '
--    ccflags="-DOVR_DBL_DIG=14 $ccflags"
--    so='sa'
--    dlext='o'
--    nm_so_opt=' '
--    ## If you are using DLD 3.2.4 which does not support shared libs,
--    ## uncomment the next two lines:
--    #ldflags="-static"
--    #so='none'
--
--	# In addition, on some systems there is a problem with perl and NDBM
--	# which causes AnyDBM and NDBM_File to lock up. This is evidenced
--	# in the tests as AnyDBM just freezing.  Apparently, this only
--	# happens on a.out systems, so we disable NDBM for all a.out linux
--	# systems.  If someone can suggest a more robust test
--	#  that would be appreciated.
--	#
--	# More info:
--	# Date: Wed, 7 Feb 1996 03:21:04 +0900
--	# From: Jeffrey Friedl <jfriedl@nff.ncl.omron.co.jp>
--	#
--	# I tried compiling with DBM support and sure enough things locked up
--	# just as advertised. Checking into it, I found that the lockup was
--	# during the call to dbm_open. Not *in* dbm_open -- but between the call
--	# to and the jump into.
--	#
--	# To make a long story short, making sure that the *.a and *.sa pairs of
--	#   /usr/lib/lib{m,db,gdbm}.{a,sa}
--	# were perfectly in sync took care of it.
--	#
--	# This will generate a harmless Whoa There! message
--	case "$d_dbm_open" in
--	'')	cat <<'EOM' >&4
--
--Disabling ndbm.  This will generate a Whoa There message in Configure.
--Read hints/linux.sh for further information.
--EOM
--		# You can override this with Configure -Dd_dbm_open
--		d_dbm_open=undef
--		;;
--	esac
--fi
--
--rm -f try.c a.out
--
- if ${sh:-/bin/sh} -c exit; then
-   echo ''
-   echo 'You appear to have a working bash.  Good.'
-@@ -497,7 +441,7 @@ then
-        DBLIB="$DBDIR/libdb.so"
-        if [ -f $DBLIB ]
-        then
--         if ${nm:-nm} -u $DBLIB | grep pthread >/dev/null
-+         if ${nm:-nm} -u $DBLIB 2>/dev/null | grep pthread >/dev/null
-          then
-            if ldd $DBLIB | grep pthread >/dev/null
-            then
-diff --git a/pp.c b/pp.c
-index 4ec6887..729239c 100644
---- a/pp.c
-+++ b/pp.c
-@@ -3435,8 +3435,12 @@ PP(pp_crypt)
- #if defined(__GLIBC__) || defined(__EMX__)
- 	if (PL_reentrant_buffer->_crypt_struct_buffer) {
- 	    PL_reentrant_buffer->_crypt_struct_buffer->initialized = 0;
--	    /* work around glibc-2.2.5 bug */
-+#if (defined(__GLIBC__) && __GLIBC__ == 2) && \
-+    (defined(__GLIBC_MINOR__) && __GLIBC_MINOR__ >= 2 && __GLIBC_MINOR__ < 4)
-+	    /* work around glibc-2.2.5 bug, has been fixed at some
-+	     * time in glibc-2.3.X */
- 	    PL_reentrant_buffer->_crypt_struct_buffer->current_saltbits = 0;
-+#endif
- 	}
- #endif
-     }

5.020.003-main,debugging,quadmath,threaded-bullseye/Dockerfile

@@ -1,59 +0,0 @@
-FROM debian:bullseye-backports
-LABEL maintainer="Ryan Voots <simcop@cpan.org>"
-
-COPY *.patch /usr/src/perl/
-WORKDIR /usr/src/perl
-
-ENV DEBIAN_FRONTEND=noninteractive
-
-RUN perl -i.bak -pE '$x=$_; $x=~s|^deb |deb-src |g;$_.=$x' /etc/apt/sources.list \
-    && apt update \
-    && apt -yq full-upgrade \
-    && apt -yq build-dep perl \
-    &&     apt-get install -y --no-install-recommends \
-       bzip2 \
-       ca-certificates \
-       # cpio \
-       curl \
-       dpkg-dev \
-       # file \
-       gcc \
-       # g++ \
-       libbz2-dev \
-       libdb-dev \
-       libc6-dev \
-       libgdbm-dev \
-       liblzma-dev \
-       make \
-       netbase \
-       patch \
-       procps \
-       zlib1g-dev \
-       xz-utils \
-    && curl -SL https://www.cpan.org/src/5.0/perl-5.20.3.tar.bz2 -o perl-5.20.3.tar.bz2 \
-    && echo '1b40068166c242e34a536836286e70b78410602a80615143301e52aa2901493b *perl-5.20.3.tar.bz2' | sha256sum -c -
-RUN tar --strip-components=1 -xaf perl-5.20.3.tar.bz2 -C /usr/src/perl \
-    && rm perl-5.20.3.tar.bz2 \
-    && cat *.patch | patch -p1 \
-    && echo 'print "1..0 # Skipped: Tests are invalid"' > /usr/src/perl/ext/GDBM_File/t/fatal.t
-RUN gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)" \
-    && archBits="$(dpkg-architecture --query DEB_BUILD_ARCH_BITS)" \
-    && archFlag="$([ "$archBits" = '64' ] && echo '-Duse64bitall' || echo '-Duse64bitint')" \
-    && ./Configure -Darchname="$gnuArch" "$archFlag" -Accflags=-ggdb -DDEBUGGING -Dusethreads -Dusequadmath -Duseshrplib -Dvendorprefix=/usr/local -Aldflags='-Wl,-z,now -Wl,-zrelro -Wl,-z,noexecstack' -Accflags='-fpie -fPIC -fstack-protector-all -pie -D_FORTIFY_SOURCE=2' -Duseshrplib  -des \
-    && make -j$(nproc) \
-    && TEST_JOBS=$(nproc) make test_harness
-RUN make install \
-    && cd /usr/src \
-    && curl -LO https://www.cpan.org/authors/id/M/MI/MIYAGAWA/App-cpanminus-1.7044.tar.gz \
-    && echo '9b60767fe40752ef7a9d3f13f19060a63389a5c23acc3e9827e19b75500f81f3 *App-cpanminus-1.7044.tar.gz' | sha256sum -c - \
-    && tar -xzf App-cpanminus-1.7044.tar.gz && cd App-cpanminus-1.7044 && perl bin/cpanm . && cd /root \
-    && savedPackages="make netbase" \
-    && apt-mark auto '.*' > /dev/null \
-    && apt-mark manual $savedPackages \
-    && apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false \
-    && rm -fr /var/cache/apt/* /var/lib/apt/lists/* \
-    && rm -fr ./cpanm /root/.cpanm /usr/src/perl /usr/src/App-cpanminus-1.7044* /tmp/*
-
-WORKDIR /
-
-CMD ["perl5.20.3","-de0"]

5.020.003-main,debugging,quadmath,threaded-bullseye/fix-pack-longdouble.patch

@@ -1,41 +0,0 @@
-From a2db6c92fc2880ba1f288b6c4599a779997dd4e7 Mon Sep 17 00:00:00 2001
-From: Tony Cook <tony@develop-help.com>
-Date: Thu, 9 Apr 2015 15:45:16 +1000
-Subject: [PATCH] [perl #123971] fix long double pack padding on newer GCC
-
----
- pp_pack.c |   11 +++++++++++
- 1 file changed, 11 insertions(+)
-
-diff --git a/pp_pack.c b/pp_pack.c
-index 06adade..1d732a8 100644
---- a/pp_pack.c
-+++ b/pp_pack.c
-@@ -2709,6 +2709,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		anv.nv = sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(anv.bytes+10, sizeof(anv.bytes) - 10, U8);
-+#    endif
- #else
- 		anv.nv = SvNV(fromstr);
- #endif
-@@ -2726,6 +2732,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #  ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		aldouble.ld = (long double)sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(aldouble.bytes+10, sizeof(aldouble.bytes) - 10, U8);
-+#    endif
- #  else
- 		aldouble.ld = (long double)SvNV(fromstr);
- #  endif
--- 
-1.7.10.4
-
-

5.020.003-main,debugging,quadmath,threaded-buster/DevelPatchPerl.patch

@@ -1,281 +0,0 @@
-diff --git a/Configure b/Configure
-index 438b926..a762f78 100755
---- a/Configure
-+++ b/Configure
-@@ -4591,7 +4591,7 @@ else
- fi
- $rm -f try try.*
- case "$gccversion" in
--1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-+1.*) cpp=`./loc gcc-cpp $cpp $pth` ;;
- esac
- case "$gccversion" in
- '') gccosandvers='' ;;
-@@ -4631,7 +4631,7 @@ esac
- # gcc 3.* complain about adding -Idirectories that they already know about,
- # so we will take those off from locincpth.
- case "$gccversion" in
--3*)
-+3.*)
-     echo "main(){}">try.c
-     for incdir in $locincpth; do
-        warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
-@@ -5328,13 +5328,13 @@ fi
- case "$hint" in
- default|recommended)
- 	case "$gccversion" in
--	1*) dflt="$dflt -fpcc-struct-return" ;;
-+	1.*) dflt="$dflt -fpcc-struct-return" ;;
- 	esac
- 	case "$optimize:$DEBUGGING" in
- 	*-g*:old) dflt="$dflt -DDEBUGGING";;
- 	esac
- 	case "$gccversion" in
--	2*) if $test -d /etc/conf/kconfig.d &&
-+	2.*) if $test -d /etc/conf/kconfig.d &&
- 			$contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- 		then
- 			# Interactive Systems (ISC) POSIX mode.
-@@ -5343,7 +5343,7 @@ default|recommended)
- 		;;
- 	esac
- 	case "$gccversion" in
--	1*) ;;
-+	1.*) ;;
- 	2.[0-8]*) ;;
- 	?*)	set strict-aliasing -fno-strict-aliasing
- 		eval $checkccflag
-@@ -5445,7 +5445,7 @@ case "$cppflags" in
- *)  cppflags="$cppflags $ccflags" ;;
- esac
- case "$gccversion" in
--1*) cppflags="$cppflags -D__GNUC__"
-+1.*) cppflags="$cppflags -D__GNUC__"
- esac
- case "$mips_type" in
- '');;
-diff --git a/cpan/Time-Local/t/Local.t b/cpan/Time-Local/t/Local.t
-index 472e71a..0a852a0 100644
---- a/cpan/Time-Local/t/Local.t
-+++ b/cpan/Time-Local/t/Local.t
-@@ -91,7 +91,7 @@ for (@time, @neg_time) {
- 
-         # Test timelocal()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timelocal($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = localtime($time);
-@@ -107,7 +107,7 @@ for (@time, @neg_time) {
- 
-         # Test timegm()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timegm($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = gmtime($time);
-@@ -125,7 +125,6 @@ for (@time, @neg_time) {
- 
- for (@bad_time) {
-     my($year, $mon, $mday, $hour, $min, $sec) = @$_;
--    $year -= 1900;
-     $mon--;
- 
-     eval { timegm($sec,$min,$hour,$mday,$mon,$year) };
-@@ -134,14 +133,14 @@ for (@bad_time) {
- }
- 
- {
--    is(timelocal(0,0,1,1,0,90) - timelocal(0,0,0,1,0,90), 3600,
-+    is(timelocal(0,0,1,1,0,1990) - timelocal(0,0,0,1,0,1990), 3600,
-        'one hour difference between two calls to timelocal');
- 
--    is(timelocal(1,2,3,1,0,100) - timelocal(1,2,3,31,11,99), 24 * 3600,
-+    is(timelocal(1,2,3,1,0,2000) - timelocal(1,2,3,31,11,1999), 24 * 3600,
-        'one day difference between two calls to timelocal');
- 
-     # Diff beween Jan 1, 1980 and Mar 1, 1980 = (31 + 29 = 60 days)
--    is(timegm(0,0,0, 1, 2, 80) - timegm(0,0,0, 1, 0, 80), 60 * 24 * 3600,
-+    is(timegm(0,0,0, 1, 2, 1980) - timegm(0,0,0, 1, 0, 1980), 60 * 24 * 3600,
-        '60 day difference between two calls to timegm');
- }
- 
-diff --git a/hints/linux.sh b/hints/linux.sh
-index 956adfc..c749f0f 100644
---- a/hints/linux.sh
-+++ b/hints/linux.sh
-@@ -85,7 +85,7 @@ uname_minus_m="${uname_minus_m:-"$targetarch"}"
- 
- # Check if we're about to use Intel's ICC compiler
- case "`${cc:-cc} -V 2>&1`" in
--*"Intel(R) C++ Compiler"*|*"Intel(R) C Compiler"*)
-+*"Intel(R) C"*" Compiler"*)
-     # record the version, formats:
-     # icc (ICC) 10.1 20080801
-     # icpc (ICC) 10.1 20080801
-@@ -165,6 +165,9 @@ esac
- # plibpth to bypass this check.
- if [ -x /usr/bin/gcc ] ; then
-     gcc=/usr/bin/gcc
-+# clang also provides -print-search-dirs
-+elif ${cc:-cc} --version 2>/dev/null | grep -q '^clang ' ; then
-+    gcc=${cc:-cc}
- else
-     gcc=gcc
- fi
-@@ -178,6 +181,33 @@ case "$plibpth" in
-     ;;
- esac
- 
-+# For the musl libc, perl should #define _GNU_SOURCE.  Otherwise, some
-+# available functions, like memem, won't be used.  See the discussion in
-+# [perl #133760].  musl doesn't offer an easy way to identify it, but,
-+# at least on alpine linux, the ldd --version output contains the
-+# string 'musl.'
-+case `ldd --version 2>&1` in
-+    musl*)  ccflags="$ccflags -D_GNU_SOURCE" ;;
-+        *) ;;
-+esac
-+
-+# libquadmath is sometimes installed as gcc internal library,
-+# so contrary to our usual policy of *not* looking at gcc internal
-+# directories we now *do* look at them, in case they contain
-+# the quadmath library.
-+# XXX This may apply to other gcc internal libraries, if such exist.
-+# XXX This could be at Configure level, but then the $gcc is messy.
-+case "$usequadmath" in
-+"$define")
-+  for d in `LANG=C LC_ALL=C $gcc $ccflags $ldflags -print-search-dirs | grep libraries | cut -f2- -d= | tr ':' $trnl | grep 'gcc' | sed -e 's:/$::'`
-+  do
-+    case `ls $d/*libquadmath*$so* 2>/dev/null` in
-+    $d/*libquadmath*$so*) xlibpth="$xlibpth $d" ;;
-+    esac
-+  done
-+  ;;
-+esac
-+
- case "$libc" in
- '')
- # If you have glibc, then report the version for ./myconfig bug reporting.
-@@ -204,92 +234,6 @@ case "$libc" in
-     ;;
- esac
- 
--# Are we using ELF?  Thanks to Kenneth Albanowski <kjahds@kjahds.com>
--# for this test.
--cat >try.c <<'EOM'
--/* Test for whether ELF binaries are produced */
--#include <fcntl.h>
--#include <stdlib.h>
--#include <unistd.h>
--main() {
--	char buffer[4];
--	int i=open("a.out",O_RDONLY);
--	if(i==-1)
--		exit(1); /* fail */
--	if(read(i,&buffer[0],4)<4)
--		exit(1); /* fail */
--	if(buffer[0] != 127 || buffer[1] != 'E' ||
--           buffer[2] != 'L' || buffer[3] != 'F')
--		exit(1); /* fail */
--	exit(0); /* succeed (yes, it's ELF) */
--}
--EOM
--if ${cc:-gcc} $ccflags $ldflags try.c >/dev/null 2>&1 && $run ./a.out; then
--    cat <<'EOM' >&4
--
--You appear to have ELF support.  I'll try to use it for dynamic loading.
--If dynamic loading doesn't work, read hints/linux.sh for further information.
--EOM
--
--else
--    cat <<'EOM' >&4
--
--You don't have an ELF gcc.  I will use dld if possible.  If you are
--using a version of DLD earlier than 3.2.6, or don't have it at all, you
--should probably upgrade. If you are forced to use 3.2.4, you should
--uncomment a couple of lines in hints/linux.sh and restart Configure so
--that shared libraries will be disallowed.
--
--EOM
--    lddlflags="-r $lddlflags"
--    # These empty values are so that Configure doesn't put in the
--    # Linux ELF values.
--    ccdlflags=' '
--    cccdlflags=' '
--    ccflags="-DOVR_DBL_DIG=14 $ccflags"
--    so='sa'
--    dlext='o'
--    nm_so_opt=' '
--    ## If you are using DLD 3.2.4 which does not support shared libs,
--    ## uncomment the next two lines:
--    #ldflags="-static"
--    #so='none'
--
--	# In addition, on some systems there is a problem with perl and NDBM
--	# which causes AnyDBM and NDBM_File to lock up. This is evidenced
--	# in the tests as AnyDBM just freezing.  Apparently, this only
--	# happens on a.out systems, so we disable NDBM for all a.out linux
--	# systems.  If someone can suggest a more robust test
--	#  that would be appreciated.
--	#
--	# More info:
--	# Date: Wed, 7 Feb 1996 03:21:04 +0900
--	# From: Jeffrey Friedl <jfriedl@nff.ncl.omron.co.jp>
--	#
--	# I tried compiling with DBM support and sure enough things locked up
--	# just as advertised. Checking into it, I found that the lockup was
--	# during the call to dbm_open. Not *in* dbm_open -- but between the call
--	# to and the jump into.
--	#
--	# To make a long story short, making sure that the *.a and *.sa pairs of
--	#   /usr/lib/lib{m,db,gdbm}.{a,sa}
--	# were perfectly in sync took care of it.
--	#
--	# This will generate a harmless Whoa There! message
--	case "$d_dbm_open" in
--	'')	cat <<'EOM' >&4
--
--Disabling ndbm.  This will generate a Whoa There message in Configure.
--Read hints/linux.sh for further information.
--EOM
--		# You can override this with Configure -Dd_dbm_open
--		d_dbm_open=undef
--		;;
--	esac
--fi
--
--rm -f try.c a.out
--
- if ${sh:-/bin/sh} -c exit; then
-   echo ''
-   echo 'You appear to have a working bash.  Good.'
-@@ -497,7 +441,7 @@ then
-        DBLIB="$DBDIR/libdb.so"
-        if [ -f $DBLIB ]
-        then
--         if ${nm:-nm} -u $DBLIB | grep pthread >/dev/null
-+         if ${nm:-nm} -u $DBLIB 2>/dev/null | grep pthread >/dev/null
-          then
-            if ldd $DBLIB | grep pthread >/dev/null
-            then
-diff --git a/pp.c b/pp.c
-index 4ec6887..729239c 100644
---- a/pp.c
-+++ b/pp.c
-@@ -3435,8 +3435,12 @@ PP(pp_crypt)
- #if defined(__GLIBC__) || defined(__EMX__)
- 	if (PL_reentrant_buffer->_crypt_struct_buffer) {
- 	    PL_reentrant_buffer->_crypt_struct_buffer->initialized = 0;
--	    /* work around glibc-2.2.5 bug */
-+#if (defined(__GLIBC__) && __GLIBC__ == 2) && \
-+    (defined(__GLIBC_MINOR__) && __GLIBC_MINOR__ >= 2 && __GLIBC_MINOR__ < 4)
-+	    /* work around glibc-2.2.5 bug, has been fixed at some
-+	     * time in glibc-2.3.X */
- 	    PL_reentrant_buffer->_crypt_struct_buffer->current_saltbits = 0;
-+#endif
- 	}
- #endif
-     }

5.020.003-main,debugging,quadmath,threaded-buster/Dockerfile

@@ -1,59 +0,0 @@
-FROM debian:buster-backports
-LABEL maintainer="Ryan Voots <simcop@cpan.org>"
-
-COPY *.patch /usr/src/perl/
-WORKDIR /usr/src/perl
-
-ENV DEBIAN_FRONTEND=noninteractive
-
-RUN perl -i.bak -pE '$x=$_; $x=~s|^deb |deb-src |g;$_.=$x' /etc/apt/sources.list \
-    && apt update \
-    && apt -yq full-upgrade \
-    && apt -yq build-dep perl \
-    &&     apt-get install -y --no-install-recommends \
-       bzip2 \
-       ca-certificates \
-       # cpio \
-       curl \
-       dpkg-dev \
-       # file \
-       gcc \
-       # g++ \
-       libbz2-dev \
-       libdb-dev \
-       libc6-dev \
-       libgdbm-dev \
-       liblzma-dev \
-       make \
-       netbase \
-       patch \
-       procps \
-       zlib1g-dev \
-       xz-utils \
-    && curl -SL https://www.cpan.org/src/5.0/perl-5.20.3.tar.bz2 -o perl-5.20.3.tar.bz2 \
-    && echo '1b40068166c242e34a536836286e70b78410602a80615143301e52aa2901493b *perl-5.20.3.tar.bz2' | sha256sum -c -
-RUN tar --strip-components=1 -xaf perl-5.20.3.tar.bz2 -C /usr/src/perl \
-    && rm perl-5.20.3.tar.bz2 \
-    && cat *.patch | patch -p1 \
-    && echo 'print "1..0 # Skipped: Tests are invalid"' > /usr/src/perl/ext/GDBM_File/t/fatal.t
-RUN gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)" \
-    && archBits="$(dpkg-architecture --query DEB_BUILD_ARCH_BITS)" \
-    && archFlag="$([ "$archBits" = '64' ] && echo '-Duse64bitall' || echo '-Duse64bitint')" \
-    && ./Configure -Darchname="$gnuArch" "$archFlag" -Accflags=-ggdb -DDEBUGGING -Dusethreads -Dusequadmath -Duseshrplib -Dvendorprefix=/usr/local -Aldflags='-Wl,-z,now -Wl,-zrelro -Wl,-z,noexecstack' -Accflags='-fpie -fPIC -fstack-protector-all -pie -D_FORTIFY_SOURCE=2' -Duseshrplib  -des \
-    && make -j$(nproc) \
-    && TEST_JOBS=$(nproc) make test_harness
-RUN make install \
-    && cd /usr/src \
-    && curl -LO https://www.cpan.org/authors/id/M/MI/MIYAGAWA/App-cpanminus-1.7044.tar.gz \
-    && echo '9b60767fe40752ef7a9d3f13f19060a63389a5c23acc3e9827e19b75500f81f3 *App-cpanminus-1.7044.tar.gz' | sha256sum -c - \
-    && tar -xzf App-cpanminus-1.7044.tar.gz && cd App-cpanminus-1.7044 && perl bin/cpanm . && cd /root \
-    && savedPackages="make netbase" \
-    && apt-mark auto '.*' > /dev/null \
-    && apt-mark manual $savedPackages \
-    && apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false \
-    && rm -fr /var/cache/apt/* /var/lib/apt/lists/* \
-    && rm -fr ./cpanm /root/.cpanm /usr/src/perl /usr/src/App-cpanminus-1.7044* /tmp/*
-
-WORKDIR /
-
-CMD ["perl5.20.3","-de0"]

5.020.003-main,debugging,quadmath,threaded-buster/fix-pack-longdouble.patch

@@ -1,41 +0,0 @@
-From a2db6c92fc2880ba1f288b6c4599a779997dd4e7 Mon Sep 17 00:00:00 2001
-From: Tony Cook <tony@develop-help.com>
-Date: Thu, 9 Apr 2015 15:45:16 +1000
-Subject: [PATCH] [perl #123971] fix long double pack padding on newer GCC
-
----
- pp_pack.c |   11 +++++++++++
- 1 file changed, 11 insertions(+)
-
-diff --git a/pp_pack.c b/pp_pack.c
-index 06adade..1d732a8 100644
---- a/pp_pack.c
-+++ b/pp_pack.c
-@@ -2709,6 +2709,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		anv.nv = sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(anv.bytes+10, sizeof(anv.bytes) - 10, U8);
-+#    endif
- #else
- 		anv.nv = SvNV(fromstr);
- #endif
-@@ -2726,6 +2732,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #  ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		aldouble.ld = (long double)sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(aldouble.bytes+10, sizeof(aldouble.bytes) - 10, U8);
-+#    endif
- #  else
- 		aldouble.ld = (long double)SvNV(fromstr);
- #  endif
--- 
-1.7.10.4
-
-

5.020.003-main,debugging,quadmath-bullseye/DevelPatchPerl.patch

@@ -1,281 +0,0 @@
-diff --git a/Configure b/Configure
-index 438b926..a762f78 100755
---- a/Configure
-+++ b/Configure
-@@ -4591,7 +4591,7 @@ else
- fi
- $rm -f try try.*
- case "$gccversion" in
--1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-+1.*) cpp=`./loc gcc-cpp $cpp $pth` ;;
- esac
- case "$gccversion" in
- '') gccosandvers='' ;;
-@@ -4631,7 +4631,7 @@ esac
- # gcc 3.* complain about adding -Idirectories that they already know about,
- # so we will take those off from locincpth.
- case "$gccversion" in
--3*)
-+3.*)
-     echo "main(){}">try.c
-     for incdir in $locincpth; do
-        warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
-@@ -5328,13 +5328,13 @@ fi
- case "$hint" in
- default|recommended)
- 	case "$gccversion" in
--	1*) dflt="$dflt -fpcc-struct-return" ;;
-+	1.*) dflt="$dflt -fpcc-struct-return" ;;
- 	esac
- 	case "$optimize:$DEBUGGING" in
- 	*-g*:old) dflt="$dflt -DDEBUGGING";;
- 	esac
- 	case "$gccversion" in
--	2*) if $test -d /etc/conf/kconfig.d &&
-+	2.*) if $test -d /etc/conf/kconfig.d &&
- 			$contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- 		then
- 			# Interactive Systems (ISC) POSIX mode.
-@@ -5343,7 +5343,7 @@ default|recommended)
- 		;;
- 	esac
- 	case "$gccversion" in
--	1*) ;;
-+	1.*) ;;
- 	2.[0-8]*) ;;
- 	?*)	set strict-aliasing -fno-strict-aliasing
- 		eval $checkccflag
-@@ -5445,7 +5445,7 @@ case "$cppflags" in
- *)  cppflags="$cppflags $ccflags" ;;
- esac
- case "$gccversion" in
--1*) cppflags="$cppflags -D__GNUC__"
-+1.*) cppflags="$cppflags -D__GNUC__"
- esac
- case "$mips_type" in
- '');;
-diff --git a/cpan/Time-Local/t/Local.t b/cpan/Time-Local/t/Local.t
-index 472e71a..0a852a0 100644
---- a/cpan/Time-Local/t/Local.t
-+++ b/cpan/Time-Local/t/Local.t
-@@ -91,7 +91,7 @@ for (@time, @neg_time) {
- 
-         # Test timelocal()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timelocal($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = localtime($time);
-@@ -107,7 +107,7 @@ for (@time, @neg_time) {
- 
-         # Test timegm()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timegm($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = gmtime($time);
-@@ -125,7 +125,6 @@ for (@time, @neg_time) {
- 
- for (@bad_time) {
-     my($year, $mon, $mday, $hour, $min, $sec) = @$_;
--    $year -= 1900;
-     $mon--;
- 
-     eval { timegm($sec,$min,$hour,$mday,$mon,$year) };
-@@ -134,14 +133,14 @@ for (@bad_time) {
- }
- 
- {
--    is(timelocal(0,0,1,1,0,90) - timelocal(0,0,0,1,0,90), 3600,
-+    is(timelocal(0,0,1,1,0,1990) - timelocal(0,0,0,1,0,1990), 3600,
-        'one hour difference between two calls to timelocal');
- 
--    is(timelocal(1,2,3,1,0,100) - timelocal(1,2,3,31,11,99), 24 * 3600,
-+    is(timelocal(1,2,3,1,0,2000) - timelocal(1,2,3,31,11,1999), 24 * 3600,
-        'one day difference between two calls to timelocal');
- 
-     # Diff beween Jan 1, 1980 and Mar 1, 1980 = (31 + 29 = 60 days)
--    is(timegm(0,0,0, 1, 2, 80) - timegm(0,0,0, 1, 0, 80), 60 * 24 * 3600,
-+    is(timegm(0,0,0, 1, 2, 1980) - timegm(0,0,0, 1, 0, 1980), 60 * 24 * 3600,
-        '60 day difference between two calls to timegm');
- }
- 
-diff --git a/hints/linux.sh b/hints/linux.sh
-index 956adfc..c749f0f 100644
---- a/hints/linux.sh
-+++ b/hints/linux.sh
-@@ -85,7 +85,7 @@ uname_minus_m="${uname_minus_m:-"$targetarch"}"
- 
- # Check if we're about to use Intel's ICC compiler
- case "`${cc:-cc} -V 2>&1`" in
--*"Intel(R) C++ Compiler"*|*"Intel(R) C Compiler"*)
-+*"Intel(R) C"*" Compiler"*)
-     # record the version, formats:
-     # icc (ICC) 10.1 20080801
-     # icpc (ICC) 10.1 20080801
-@@ -165,6 +165,9 @@ esac
- # plibpth to bypass this check.
- if [ -x /usr/bin/gcc ] ; then
-     gcc=/usr/bin/gcc
-+# clang also provides -print-search-dirs
-+elif ${cc:-cc} --version 2>/dev/null | grep -q '^clang ' ; then
-+    gcc=${cc:-cc}
- else
-     gcc=gcc
- fi
-@@ -178,6 +181,33 @@ case "$plibpth" in
-     ;;
- esac
- 
-+# For the musl libc, perl should #define _GNU_SOURCE.  Otherwise, some
-+# available functions, like memem, won't be used.  See the discussion in
-+# [perl #133760].  musl doesn't offer an easy way to identify it, but,
-+# at least on alpine linux, the ldd --version output contains the
-+# string 'musl.'
-+case `ldd --version 2>&1` in
-+    musl*)  ccflags="$ccflags -D_GNU_SOURCE" ;;
-+        *) ;;
-+esac
-+
-+# libquadmath is sometimes installed as gcc internal library,
-+# so contrary to our usual policy of *not* looking at gcc internal
-+# directories we now *do* look at them, in case they contain
-+# the quadmath library.
-+# XXX This may apply to other gcc internal libraries, if such exist.
-+# XXX This could be at Configure level, but then the $gcc is messy.
-+case "$usequadmath" in
-+"$define")
-+  for d in `LANG=C LC_ALL=C $gcc $ccflags $ldflags -print-search-dirs | grep libraries | cut -f2- -d= | tr ':' $trnl | grep 'gcc' | sed -e 's:/$::'`
-+  do
-+    case `ls $d/*libquadmath*$so* 2>/dev/null` in
-+    $d/*libquadmath*$so*) xlibpth="$xlibpth $d" ;;
-+    esac
-+  done
-+  ;;
-+esac
-+
- case "$libc" in
- '')
- # If you have glibc, then report the version for ./myconfig bug reporting.
-@@ -204,92 +234,6 @@ case "$libc" in
-     ;;
- esac
- 
--# Are we using ELF?  Thanks to Kenneth Albanowski <kjahds@kjahds.com>
--# for this test.
--cat >try.c <<'EOM'
--/* Test for whether ELF binaries are produced */
--#include <fcntl.h>
--#include <stdlib.h>
--#include <unistd.h>
--main() {
--	char buffer[4];
--	int i=open("a.out",O_RDONLY);
--	if(i==-1)
--		exit(1); /* fail */
--	if(read(i,&buffer[0],4)<4)
--		exit(1); /* fail */
--	if(buffer[0] != 127 || buffer[1] != 'E' ||
--           buffer[2] != 'L' || buffer[3] != 'F')
--		exit(1); /* fail */
--	exit(0); /* succeed (yes, it's ELF) */
--}
--EOM
--if ${cc:-gcc} $ccflags $ldflags try.c >/dev/null 2>&1 && $run ./a.out; then
--    cat <<'EOM' >&4
--
--You appear to have ELF support.  I'll try to use it for dynamic loading.
--If dynamic loading doesn't work, read hints/linux.sh for further information.
--EOM
--
--else
--    cat <<'EOM' >&4
--
--You don't have an ELF gcc.  I will use dld if possible.  If you are
--using a version of DLD earlier than 3.2.6, or don't have it at all, you
--should probably upgrade. If you are forced to use 3.2.4, you should
--uncomment a couple of lines in hints/linux.sh and restart Configure so
--that shared libraries will be disallowed.
--
--EOM
--    lddlflags="-r $lddlflags"
--    # These empty values are so that Configure doesn't put in the
--    # Linux ELF values.
--    ccdlflags=' '
--    cccdlflags=' '
--    ccflags="-DOVR_DBL_DIG=14 $ccflags"
--    so='sa'
--    dlext='o'
--    nm_so_opt=' '
--    ## If you are using DLD 3.2.4 which does not support shared libs,
--    ## uncomment the next two lines:
--    #ldflags="-static"
--    #so='none'
--
--	# In addition, on some systems there is a problem with perl and NDBM
--	# which causes AnyDBM and NDBM_File to lock up. This is evidenced
--	# in the tests as AnyDBM just freezing.  Apparently, this only
--	# happens on a.out systems, so we disable NDBM for all a.out linux
--	# systems.  If someone can suggest a more robust test
--	#  that would be appreciated.
--	#
--	# More info:
--	# Date: Wed, 7 Feb 1996 03:21:04 +0900
--	# From: Jeffrey Friedl <jfriedl@nff.ncl.omron.co.jp>
--	#
--	# I tried compiling with DBM support and sure enough things locked up
--	# just as advertised. Checking into it, I found that the lockup was
--	# during the call to dbm_open. Not *in* dbm_open -- but between the call
--	# to and the jump into.
--	#
--	# To make a long story short, making sure that the *.a and *.sa pairs of
--	#   /usr/lib/lib{m,db,gdbm}.{a,sa}
--	# were perfectly in sync took care of it.
--	#
--	# This will generate a harmless Whoa There! message
--	case "$d_dbm_open" in
--	'')	cat <<'EOM' >&4
--
--Disabling ndbm.  This will generate a Whoa There message in Configure.
--Read hints/linux.sh for further information.
--EOM
--		# You can override this with Configure -Dd_dbm_open
--		d_dbm_open=undef
--		;;
--	esac
--fi
--
--rm -f try.c a.out
--
- if ${sh:-/bin/sh} -c exit; then
-   echo ''
-   echo 'You appear to have a working bash.  Good.'
-@@ -497,7 +441,7 @@ then
-        DBLIB="$DBDIR/libdb.so"
-        if [ -f $DBLIB ]
-        then
--         if ${nm:-nm} -u $DBLIB | grep pthread >/dev/null
-+         if ${nm:-nm} -u $DBLIB 2>/dev/null | grep pthread >/dev/null
-          then
-            if ldd $DBLIB | grep pthread >/dev/null
-            then
-diff --git a/pp.c b/pp.c
-index 4ec6887..729239c 100644
---- a/pp.c
-+++ b/pp.c
-@@ -3435,8 +3435,12 @@ PP(pp_crypt)
- #if defined(__GLIBC__) || defined(__EMX__)
- 	if (PL_reentrant_buffer->_crypt_struct_buffer) {
- 	    PL_reentrant_buffer->_crypt_struct_buffer->initialized = 0;
--	    /* work around glibc-2.2.5 bug */
-+#if (defined(__GLIBC__) && __GLIBC__ == 2) && \
-+    (defined(__GLIBC_MINOR__) && __GLIBC_MINOR__ >= 2 && __GLIBC_MINOR__ < 4)
-+	    /* work around glibc-2.2.5 bug, has been fixed at some
-+	     * time in glibc-2.3.X */
- 	    PL_reentrant_buffer->_crypt_struct_buffer->current_saltbits = 0;
-+#endif
- 	}
- #endif
-     }

5.020.003-main,debugging,quadmath-bullseye/Dockerfile

@@ -1,59 +0,0 @@
-FROM debian:bullseye-backports
-LABEL maintainer="Ryan Voots <simcop@cpan.org>"
-
-COPY *.patch /usr/src/perl/
-WORKDIR /usr/src/perl
-
-ENV DEBIAN_FRONTEND=noninteractive
-
-RUN perl -i.bak -pE '$x=$_; $x=~s|^deb |deb-src |g;$_.=$x' /etc/apt/sources.list \
-    && apt update \
-    && apt -yq full-upgrade \
-    && apt -yq build-dep perl \
-    &&     apt-get install -y --no-install-recommends \
-       bzip2 \
-       ca-certificates \
-       # cpio \
-       curl \
-       dpkg-dev \
-       # file \
-       gcc \
-       # g++ \
-       libbz2-dev \
-       libdb-dev \
-       libc6-dev \
-       libgdbm-dev \
-       liblzma-dev \
-       make \
-       netbase \
-       patch \
-       procps \
-       zlib1g-dev \
-       xz-utils \
-    && curl -SL https://www.cpan.org/src/5.0/perl-5.20.3.tar.bz2 -o perl-5.20.3.tar.bz2 \
-    && echo '1b40068166c242e34a536836286e70b78410602a80615143301e52aa2901493b *perl-5.20.3.tar.bz2' | sha256sum -c -
-RUN tar --strip-components=1 -xaf perl-5.20.3.tar.bz2 -C /usr/src/perl \
-    && rm perl-5.20.3.tar.bz2 \
-    && cat *.patch | patch -p1 \
-    && echo 'print "1..0 # Skipped: Tests are invalid"' > /usr/src/perl/ext/GDBM_File/t/fatal.t
-RUN gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)" \
-    && archBits="$(dpkg-architecture --query DEB_BUILD_ARCH_BITS)" \
-    && archFlag="$([ "$archBits" = '64' ] && echo '-Duse64bitall' || echo '-Duse64bitint')" \
-    && ./Configure -Darchname="$gnuArch" "$archFlag" -Accflags=-ggdb -DDEBUGGING -Dusequadmath -Duseshrplib -Dvendorprefix=/usr/local -Aldflags='-Wl,-z,now -Wl,-zrelro -Wl,-z,noexecstack' -Accflags='-fpie -fPIC -fstack-protector-all -pie -D_FORTIFY_SOURCE=2' -Duseshrplib  -des \
-    && make -j$(nproc) \
-    && TEST_JOBS=$(nproc) make test_harness
-RUN make install \
-    && cd /usr/src \
-    && curl -LO https://www.cpan.org/authors/id/M/MI/MIYAGAWA/App-cpanminus-1.7044.tar.gz \
-    && echo '9b60767fe40752ef7a9d3f13f19060a63389a5c23acc3e9827e19b75500f81f3 *App-cpanminus-1.7044.tar.gz' | sha256sum -c - \
-    && tar -xzf App-cpanminus-1.7044.tar.gz && cd App-cpanminus-1.7044 && perl bin/cpanm . && cd /root \
-    && savedPackages="make netbase" \
-    && apt-mark auto '.*' > /dev/null \
-    && apt-mark manual $savedPackages \
-    && apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false \
-    && rm -fr /var/cache/apt/* /var/lib/apt/lists/* \
-    && rm -fr ./cpanm /root/.cpanm /usr/src/perl /usr/src/App-cpanminus-1.7044* /tmp/*
-
-WORKDIR /
-
-CMD ["perl5.20.3","-de0"]

5.020.003-main,debugging,quadmath-bullseye/fix-pack-longdouble.patch

@@ -1,41 +0,0 @@
-From a2db6c92fc2880ba1f288b6c4599a779997dd4e7 Mon Sep 17 00:00:00 2001
-From: Tony Cook <tony@develop-help.com>
-Date: Thu, 9 Apr 2015 15:45:16 +1000
-Subject: [PATCH] [perl #123971] fix long double pack padding on newer GCC
-
----
- pp_pack.c |   11 +++++++++++
- 1 file changed, 11 insertions(+)
-
-diff --git a/pp_pack.c b/pp_pack.c
-index 06adade..1d732a8 100644
---- a/pp_pack.c
-+++ b/pp_pack.c
-@@ -2709,6 +2709,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		anv.nv = sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(anv.bytes+10, sizeof(anv.bytes) - 10, U8);
-+#    endif
- #else
- 		anv.nv = SvNV(fromstr);
- #endif
-@@ -2726,6 +2732,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #  ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		aldouble.ld = (long double)sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(aldouble.bytes+10, sizeof(aldouble.bytes) - 10, U8);
-+#    endif
- #  else
- 		aldouble.ld = (long double)SvNV(fromstr);
- #  endif
--- 
-1.7.10.4
-
-

5.020.003-main,debugging,quadmath-buster/DevelPatchPerl.patch

@@ -1,281 +0,0 @@
-diff --git a/Configure b/Configure
-index 438b926..a762f78 100755
---- a/Configure
-+++ b/Configure
-@@ -4591,7 +4591,7 @@ else
- fi
- $rm -f try try.*
- case "$gccversion" in
--1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-+1.*) cpp=`./loc gcc-cpp $cpp $pth` ;;
- esac
- case "$gccversion" in
- '') gccosandvers='' ;;
-@@ -4631,7 +4631,7 @@ esac
- # gcc 3.* complain about adding -Idirectories that they already know about,
- # so we will take those off from locincpth.
- case "$gccversion" in
--3*)
-+3.*)
-     echo "main(){}">try.c
-     for incdir in $locincpth; do
-        warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
-@@ -5328,13 +5328,13 @@ fi
- case "$hint" in
- default|recommended)
- 	case "$gccversion" in
--	1*) dflt="$dflt -fpcc-struct-return" ;;
-+	1.*) dflt="$dflt -fpcc-struct-return" ;;
- 	esac
- 	case "$optimize:$DEBUGGING" in
- 	*-g*:old) dflt="$dflt -DDEBUGGING";;
- 	esac
- 	case "$gccversion" in
--	2*) if $test -d /etc/conf/kconfig.d &&
-+	2.*) if $test -d /etc/conf/kconfig.d &&
- 			$contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- 		then
- 			# Interactive Systems (ISC) POSIX mode.
-@@ -5343,7 +5343,7 @@ default|recommended)
- 		;;
- 	esac
- 	case "$gccversion" in
--	1*) ;;
-+	1.*) ;;
- 	2.[0-8]*) ;;
- 	?*)	set strict-aliasing -fno-strict-aliasing
- 		eval $checkccflag
-@@ -5445,7 +5445,7 @@ case "$cppflags" in
- *)  cppflags="$cppflags $ccflags" ;;
- esac
- case "$gccversion" in
--1*) cppflags="$cppflags -D__GNUC__"
-+1.*) cppflags="$cppflags -D__GNUC__"
- esac
- case "$mips_type" in
- '');;
-diff --git a/cpan/Time-Local/t/Local.t b/cpan/Time-Local/t/Local.t
-index 472e71a..0a852a0 100644
---- a/cpan/Time-Local/t/Local.t
-+++ b/cpan/Time-Local/t/Local.t
-@@ -91,7 +91,7 @@ for (@time, @neg_time) {
- 
-         # Test timelocal()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timelocal($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = localtime($time);
-@@ -107,7 +107,7 @@ for (@time, @neg_time) {
- 
-         # Test timegm()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timegm($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = gmtime($time);
-@@ -125,7 +125,6 @@ for (@time, @neg_time) {
- 
- for (@bad_time) {
-     my($year, $mon, $mday, $hour, $min, $sec) = @$_;
--    $year -= 1900;
-     $mon--;
- 
-     eval { timegm($sec,$min,$hour,$mday,$mon,$year) };
-@@ -134,14 +133,14 @@ for (@bad_time) {
- }
- 
- {
--    is(timelocal(0,0,1,1,0,90) - timelocal(0,0,0,1,0,90), 3600,
-+    is(timelocal(0,0,1,1,0,1990) - timelocal(0,0,0,1,0,1990), 3600,
-        'one hour difference between two calls to timelocal');
- 
--    is(timelocal(1,2,3,1,0,100) - timelocal(1,2,3,31,11,99), 24 * 3600,
-+    is(timelocal(1,2,3,1,0,2000) - timelocal(1,2,3,31,11,1999), 24 * 3600,
-        'one day difference between two calls to timelocal');
- 
-     # Diff beween Jan 1, 1980 and Mar 1, 1980 = (31 + 29 = 60 days)
--    is(timegm(0,0,0, 1, 2, 80) - timegm(0,0,0, 1, 0, 80), 60 * 24 * 3600,
-+    is(timegm(0,0,0, 1, 2, 1980) - timegm(0,0,0, 1, 0, 1980), 60 * 24 * 3600,
-        '60 day difference between two calls to timegm');
- }
- 
-diff --git a/hints/linux.sh b/hints/linux.sh
-index 956adfc..c749f0f 100644
---- a/hints/linux.sh
-+++ b/hints/linux.sh
-@@ -85,7 +85,7 @@ uname_minus_m="${uname_minus_m:-"$targetarch"}"
- 
- # Check if we're about to use Intel's ICC compiler
- case "`${cc:-cc} -V 2>&1`" in
--*"Intel(R) C++ Compiler"*|*"Intel(R) C Compiler"*)
-+*"Intel(R) C"*" Compiler"*)
-     # record the version, formats:
-     # icc (ICC) 10.1 20080801
-     # icpc (ICC) 10.1 20080801
-@@ -165,6 +165,9 @@ esac
- # plibpth to bypass this check.
- if [ -x /usr/bin/gcc ] ; then
-     gcc=/usr/bin/gcc
-+# clang also provides -print-search-dirs
-+elif ${cc:-cc} --version 2>/dev/null | grep -q '^clang ' ; then
-+    gcc=${cc:-cc}
- else
-     gcc=gcc
- fi
-@@ -178,6 +181,33 @@ case "$plibpth" in
-     ;;
- esac
- 
-+# For the musl libc, perl should #define _GNU_SOURCE.  Otherwise, some
-+# available functions, like memem, won't be used.  See the discussion in
-+# [perl #133760].  musl doesn't offer an easy way to identify it, but,
-+# at least on alpine linux, the ldd --version output contains the
-+# string 'musl.'
-+case `ldd --version 2>&1` in
-+    musl*)  ccflags="$ccflags -D_GNU_SOURCE" ;;
-+        *) ;;
-+esac
-+
-+# libquadmath is sometimes installed as gcc internal library,
-+# so contrary to our usual policy of *not* looking at gcc internal
-+# directories we now *do* look at them, in case they contain
-+# the quadmath library.
-+# XXX This may apply to other gcc internal libraries, if such exist.
-+# XXX This could be at Configure level, but then the $gcc is messy.
-+case "$usequadmath" in
-+"$define")
-+  for d in `LANG=C LC_ALL=C $gcc $ccflags $ldflags -print-search-dirs | grep libraries | cut -f2- -d= | tr ':' $trnl | grep 'gcc' | sed -e 's:/$::'`
-+  do
-+    case `ls $d/*libquadmath*$so* 2>/dev/null` in
-+    $d/*libquadmath*$so*) xlibpth="$xlibpth $d" ;;
-+    esac
-+  done
-+  ;;
-+esac
-+
- case "$libc" in
- '')
- # If you have glibc, then report the version for ./myconfig bug reporting.
-@@ -204,92 +234,6 @@ case "$libc" in
-     ;;
- esac
- 
--# Are we using ELF?  Thanks to Kenneth Albanowski <kjahds@kjahds.com>
--# for this test.
--cat >try.c <<'EOM'
--/* Test for whether ELF binaries are produced */
--#include <fcntl.h>
--#include <stdlib.h>
--#include <unistd.h>
--main() {
--	char buffer[4];
--	int i=open("a.out",O_RDONLY);
--	if(i==-1)
--		exit(1); /* fail */
--	if(read(i,&buffer[0],4)<4)
--		exit(1); /* fail */
--	if(buffer[0] != 127 || buffer[1] != 'E' ||
--           buffer[2] != 'L' || buffer[3] != 'F')
--		exit(1); /* fail */
--	exit(0); /* succeed (yes, it's ELF) */
--}
--EOM
--if ${cc:-gcc} $ccflags $ldflags try.c >/dev/null 2>&1 && $run ./a.out; then
--    cat <<'EOM' >&4
--
--You appear to have ELF support.  I'll try to use it for dynamic loading.
--If dynamic loading doesn't work, read hints/linux.sh for further information.
--EOM
--
--else
--    cat <<'EOM' >&4
--
--You don't have an ELF gcc.  I will use dld if possible.  If you are
--using a version of DLD earlier than 3.2.6, or don't have it at all, you
--should probably upgrade. If you are forced to use 3.2.4, you should
--uncomment a couple of lines in hints/linux.sh and restart Configure so
--that shared libraries will be disallowed.
--
--EOM
--    lddlflags="-r $lddlflags"
--    # These empty values are so that Configure doesn't put in the
--    # Linux ELF values.
--    ccdlflags=' '
--    cccdlflags=' '
--    ccflags="-DOVR_DBL_DIG=14 $ccflags"
--    so='sa'
--    dlext='o'
--    nm_so_opt=' '
--    ## If you are using DLD 3.2.4 which does not support shared libs,
--    ## uncomment the next two lines:
--    #ldflags="-static"
--    #so='none'
--
--	# In addition, on some systems there is a problem with perl and NDBM
--	# which causes AnyDBM and NDBM_File to lock up. This is evidenced
--	# in the tests as AnyDBM just freezing.  Apparently, this only
--	# happens on a.out systems, so we disable NDBM for all a.out linux
--	# systems.  If someone can suggest a more robust test
--	#  that would be appreciated.
--	#
--	# More info:
--	# Date: Wed, 7 Feb 1996 03:21:04 +0900
--	# From: Jeffrey Friedl <jfriedl@nff.ncl.omron.co.jp>
--	#
--	# I tried compiling with DBM support and sure enough things locked up
--	# just as advertised. Checking into it, I found that the lockup was
--	# during the call to dbm_open. Not *in* dbm_open -- but between the call
--	# to and the jump into.
--	#
--	# To make a long story short, making sure that the *.a and *.sa pairs of
--	#   /usr/lib/lib{m,db,gdbm}.{a,sa}
--	# were perfectly in sync took care of it.
--	#
--	# This will generate a harmless Whoa There! message
--	case "$d_dbm_open" in
--	'')	cat <<'EOM' >&4
--
--Disabling ndbm.  This will generate a Whoa There message in Configure.
--Read hints/linux.sh for further information.
--EOM
--		# You can override this with Configure -Dd_dbm_open
--		d_dbm_open=undef
--		;;
--	esac
--fi
--
--rm -f try.c a.out
--
- if ${sh:-/bin/sh} -c exit; then
-   echo ''
-   echo 'You appear to have a working bash.  Good.'
-@@ -497,7 +441,7 @@ then
-        DBLIB="$DBDIR/libdb.so"
-        if [ -f $DBLIB ]
-        then
--         if ${nm:-nm} -u $DBLIB | grep pthread >/dev/null
-+         if ${nm:-nm} -u $DBLIB 2>/dev/null | grep pthread >/dev/null
-          then
-            if ldd $DBLIB | grep pthread >/dev/null
-            then
-diff --git a/pp.c b/pp.c
-index 4ec6887..729239c 100644
---- a/pp.c
-+++ b/pp.c
-@@ -3435,8 +3435,12 @@ PP(pp_crypt)
- #if defined(__GLIBC__) || defined(__EMX__)
- 	if (PL_reentrant_buffer->_crypt_struct_buffer) {
- 	    PL_reentrant_buffer->_crypt_struct_buffer->initialized = 0;
--	    /* work around glibc-2.2.5 bug */
-+#if (defined(__GLIBC__) && __GLIBC__ == 2) && \
-+    (defined(__GLIBC_MINOR__) && __GLIBC_MINOR__ >= 2 && __GLIBC_MINOR__ < 4)
-+	    /* work around glibc-2.2.5 bug, has been fixed at some
-+	     * time in glibc-2.3.X */
- 	    PL_reentrant_buffer->_crypt_struct_buffer->current_saltbits = 0;
-+#endif
- 	}
- #endif
-     }

5.020.003-main,debugging,quadmath-buster/Dockerfile

@@ -1,59 +0,0 @@
-FROM debian:buster-backports
-LABEL maintainer="Ryan Voots <simcop@cpan.org>"
-
-COPY *.patch /usr/src/perl/
-WORKDIR /usr/src/perl
-
-ENV DEBIAN_FRONTEND=noninteractive
-
-RUN perl -i.bak -pE '$x=$_; $x=~s|^deb |deb-src |g;$_.=$x' /etc/apt/sources.list \
-    && apt update \
-    && apt -yq full-upgrade \
-    && apt -yq build-dep perl \
-    &&     apt-get install -y --no-install-recommends \
-       bzip2 \
-       ca-certificates \
-       # cpio \
-       curl \
-       dpkg-dev \
-       # file \
-       gcc \
-       # g++ \
-       libbz2-dev \
-       libdb-dev \
-       libc6-dev \
-       libgdbm-dev \
-       liblzma-dev \
-       make \
-       netbase \
-       patch \
-       procps \
-       zlib1g-dev \
-       xz-utils \
-    && curl -SL https://www.cpan.org/src/5.0/perl-5.20.3.tar.bz2 -o perl-5.20.3.tar.bz2 \
-    && echo '1b40068166c242e34a536836286e70b78410602a80615143301e52aa2901493b *perl-5.20.3.tar.bz2' | sha256sum -c -
-RUN tar --strip-components=1 -xaf perl-5.20.3.tar.bz2 -C /usr/src/perl \
-    && rm perl-5.20.3.tar.bz2 \
-    && cat *.patch | patch -p1 \
-    && echo 'print "1..0 # Skipped: Tests are invalid"' > /usr/src/perl/ext/GDBM_File/t/fatal.t
-RUN gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)" \
-    && archBits="$(dpkg-architecture --query DEB_BUILD_ARCH_BITS)" \
-    && archFlag="$([ "$archBits" = '64' ] && echo '-Duse64bitall' || echo '-Duse64bitint')" \
-    && ./Configure -Darchname="$gnuArch" "$archFlag" -Accflags=-ggdb -DDEBUGGING -Dusequadmath -Duseshrplib -Dvendorprefix=/usr/local -Aldflags='-Wl,-z,now -Wl,-zrelro -Wl,-z,noexecstack' -Accflags='-fpie -fPIC -fstack-protector-all -pie -D_FORTIFY_SOURCE=2' -Duseshrplib  -des \
-    && make -j$(nproc) \
-    && TEST_JOBS=$(nproc) make test_harness
-RUN make install \
-    && cd /usr/src \
-    && curl -LO https://www.cpan.org/authors/id/M/MI/MIYAGAWA/App-cpanminus-1.7044.tar.gz \
-    && echo '9b60767fe40752ef7a9d3f13f19060a63389a5c23acc3e9827e19b75500f81f3 *App-cpanminus-1.7044.tar.gz' | sha256sum -c - \
-    && tar -xzf App-cpanminus-1.7044.tar.gz && cd App-cpanminus-1.7044 && perl bin/cpanm . && cd /root \
-    && savedPackages="make netbase" \
-    && apt-mark auto '.*' > /dev/null \
-    && apt-mark manual $savedPackages \
-    && apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false \
-    && rm -fr /var/cache/apt/* /var/lib/apt/lists/* \
-    && rm -fr ./cpanm /root/.cpanm /usr/src/perl /usr/src/App-cpanminus-1.7044* /tmp/*
-
-WORKDIR /
-
-CMD ["perl5.20.3","-de0"]

5.020.003-main,debugging,quadmath-buster/fix-pack-longdouble.patch

@@ -1,41 +0,0 @@
-From a2db6c92fc2880ba1f288b6c4599a779997dd4e7 Mon Sep 17 00:00:00 2001
-From: Tony Cook <tony@develop-help.com>
-Date: Thu, 9 Apr 2015 15:45:16 +1000
-Subject: [PATCH] [perl #123971] fix long double pack padding on newer GCC
-
----
- pp_pack.c |   11 +++++++++++
- 1 file changed, 11 insertions(+)
-
-diff --git a/pp_pack.c b/pp_pack.c
-index 06adade..1d732a8 100644
---- a/pp_pack.c
-+++ b/pp_pack.c
-@@ -2709,6 +2709,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		anv.nv = sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(anv.bytes+10, sizeof(anv.bytes) - 10, U8);
-+#    endif
- #else
- 		anv.nv = SvNV(fromstr);
- #endif
-@@ -2726,6 +2732,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #  ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		aldouble.ld = (long double)sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(aldouble.bytes+10, sizeof(aldouble.bytes) - 10, U8);
-+#    endif
- #  else
- 		aldouble.ld = (long double)SvNV(fromstr);
- #  endif
--- 
-1.7.10.4
-
-

5.020.003-main,debugging,threaded-bullseye/DevelPatchPerl.patch

@@ -1,281 +0,0 @@
-diff --git a/Configure b/Configure
-index 438b926..a762f78 100755
---- a/Configure
-+++ b/Configure
-@@ -4591,7 +4591,7 @@ else
- fi
- $rm -f try try.*
- case "$gccversion" in
--1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-+1.*) cpp=`./loc gcc-cpp $cpp $pth` ;;
- esac
- case "$gccversion" in
- '') gccosandvers='' ;;
-@@ -4631,7 +4631,7 @@ esac
- # gcc 3.* complain about adding -Idirectories that they already know about,
- # so we will take those off from locincpth.
- case "$gccversion" in
--3*)
-+3.*)
-     echo "main(){}">try.c
-     for incdir in $locincpth; do
-        warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
-@@ -5328,13 +5328,13 @@ fi
- case "$hint" in
- default|recommended)
- 	case "$gccversion" in
--	1*) dflt="$dflt -fpcc-struct-return" ;;
-+	1.*) dflt="$dflt -fpcc-struct-return" ;;
- 	esac
- 	case "$optimize:$DEBUGGING" in
- 	*-g*:old) dflt="$dflt -DDEBUGGING";;
- 	esac
- 	case "$gccversion" in
--	2*) if $test -d /etc/conf/kconfig.d &&
-+	2.*) if $test -d /etc/conf/kconfig.d &&
- 			$contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- 		then
- 			# Interactive Systems (ISC) POSIX mode.
-@@ -5343,7 +5343,7 @@ default|recommended)
- 		;;
- 	esac
- 	case "$gccversion" in
--	1*) ;;
-+	1.*) ;;
- 	2.[0-8]*) ;;
- 	?*)	set strict-aliasing -fno-strict-aliasing
- 		eval $checkccflag
-@@ -5445,7 +5445,7 @@ case "$cppflags" in
- *)  cppflags="$cppflags $ccflags" ;;
- esac
- case "$gccversion" in
--1*) cppflags="$cppflags -D__GNUC__"
-+1.*) cppflags="$cppflags -D__GNUC__"
- esac
- case "$mips_type" in
- '');;
-diff --git a/cpan/Time-Local/t/Local.t b/cpan/Time-Local/t/Local.t
-index 472e71a..0a852a0 100644
---- a/cpan/Time-Local/t/Local.t
-+++ b/cpan/Time-Local/t/Local.t
-@@ -91,7 +91,7 @@ for (@time, @neg_time) {
- 
-         # Test timelocal()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timelocal($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = localtime($time);
-@@ -107,7 +107,7 @@ for (@time, @neg_time) {
- 
-         # Test timegm()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timegm($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = gmtime($time);
-@@ -125,7 +125,6 @@ for (@time, @neg_time) {
- 
- for (@bad_time) {
-     my($year, $mon, $mday, $hour, $min, $sec) = @$_;
--    $year -= 1900;
-     $mon--;
- 
-     eval { timegm($sec,$min,$hour,$mday,$mon,$year) };
-@@ -134,14 +133,14 @@ for (@bad_time) {
- }
- 
- {
--    is(timelocal(0,0,1,1,0,90) - timelocal(0,0,0,1,0,90), 3600,
-+    is(timelocal(0,0,1,1,0,1990) - timelocal(0,0,0,1,0,1990), 3600,
-        'one hour difference between two calls to timelocal');
- 
--    is(timelocal(1,2,3,1,0,100) - timelocal(1,2,3,31,11,99), 24 * 3600,
-+    is(timelocal(1,2,3,1,0,2000) - timelocal(1,2,3,31,11,1999), 24 * 3600,
-        'one day difference between two calls to timelocal');
- 
-     # Diff beween Jan 1, 1980 and Mar 1, 1980 = (31 + 29 = 60 days)
--    is(timegm(0,0,0, 1, 2, 80) - timegm(0,0,0, 1, 0, 80), 60 * 24 * 3600,
-+    is(timegm(0,0,0, 1, 2, 1980) - timegm(0,0,0, 1, 0, 1980), 60 * 24 * 3600,
-        '60 day difference between two calls to timegm');
- }
- 
-diff --git a/hints/linux.sh b/hints/linux.sh
-index 956adfc..c749f0f 100644
---- a/hints/linux.sh
-+++ b/hints/linux.sh
-@@ -85,7 +85,7 @@ uname_minus_m="${uname_minus_m:-"$targetarch"}"
- 
- # Check if we're about to use Intel's ICC compiler
- case "`${cc:-cc} -V 2>&1`" in
--*"Intel(R) C++ Compiler"*|*"Intel(R) C Compiler"*)
-+*"Intel(R) C"*" Compiler"*)
-     # record the version, formats:
-     # icc (ICC) 10.1 20080801
-     # icpc (ICC) 10.1 20080801
-@@ -165,6 +165,9 @@ esac
- # plibpth to bypass this check.
- if [ -x /usr/bin/gcc ] ; then
-     gcc=/usr/bin/gcc
-+# clang also provides -print-search-dirs
-+elif ${cc:-cc} --version 2>/dev/null | grep -q '^clang ' ; then
-+    gcc=${cc:-cc}
- else
-     gcc=gcc
- fi
-@@ -178,6 +181,33 @@ case "$plibpth" in
-     ;;
- esac
- 
-+# For the musl libc, perl should #define _GNU_SOURCE.  Otherwise, some
-+# available functions, like memem, won't be used.  See the discussion in
-+# [perl #133760].  musl doesn't offer an easy way to identify it, but,
-+# at least on alpine linux, the ldd --version output contains the
-+# string 'musl.'
-+case `ldd --version 2>&1` in
-+    musl*)  ccflags="$ccflags -D_GNU_SOURCE" ;;
-+        *) ;;
-+esac
-+
-+# libquadmath is sometimes installed as gcc internal library,
-+# so contrary to our usual policy of *not* looking at gcc internal
-+# directories we now *do* look at them, in case they contain
-+# the quadmath library.
-+# XXX This may apply to other gcc internal libraries, if such exist.
-+# XXX This could be at Configure level, but then the $gcc is messy.
-+case "$usequadmath" in
-+"$define")
-+  for d in `LANG=C LC_ALL=C $gcc $ccflags $ldflags -print-search-dirs | grep libraries | cut -f2- -d= | tr ':' $trnl | grep 'gcc' | sed -e 's:/$::'`
-+  do
-+    case `ls $d/*libquadmath*$so* 2>/dev/null` in
-+    $d/*libquadmath*$so*) xlibpth="$xlibpth $d" ;;
-+    esac
-+  done
-+  ;;
-+esac
-+
- case "$libc" in
- '')
- # If you have glibc, then report the version for ./myconfig bug reporting.
-@@ -204,92 +234,6 @@ case "$libc" in
-     ;;
- esac
- 
--# Are we using ELF?  Thanks to Kenneth Albanowski <kjahds@kjahds.com>
--# for this test.
--cat >try.c <<'EOM'
--/* Test for whether ELF binaries are produced */
--#include <fcntl.h>
--#include <stdlib.h>
--#include <unistd.h>
--main() {
--	char buffer[4];
--	int i=open("a.out",O_RDONLY);
--	if(i==-1)
--		exit(1); /* fail */
--	if(read(i,&buffer[0],4)<4)
--		exit(1); /* fail */
--	if(buffer[0] != 127 || buffer[1] != 'E' ||
--           buffer[2] != 'L' || buffer[3] != 'F')
--		exit(1); /* fail */
--	exit(0); /* succeed (yes, it's ELF) */
--}
--EOM
--if ${cc:-gcc} $ccflags $ldflags try.c >/dev/null 2>&1 && $run ./a.out; then
--    cat <<'EOM' >&4
--
--You appear to have ELF support.  I'll try to use it for dynamic loading.
--If dynamic loading doesn't work, read hints/linux.sh for further information.
--EOM
--
--else
--    cat <<'EOM' >&4
--
--You don't have an ELF gcc.  I will use dld if possible.  If you are
--using a version of DLD earlier than 3.2.6, or don't have it at all, you
--should probably upgrade. If you are forced to use 3.2.4, you should
--uncomment a couple of lines in hints/linux.sh and restart Configure so
--that shared libraries will be disallowed.
--
--EOM
--    lddlflags="-r $lddlflags"
--    # These empty values are so that Configure doesn't put in the
--    # Linux ELF values.
--    ccdlflags=' '
--    cccdlflags=' '
--    ccflags="-DOVR_DBL_DIG=14 $ccflags"
--    so='sa'
--    dlext='o'
--    nm_so_opt=' '
--    ## If you are using DLD 3.2.4 which does not support shared libs,
--    ## uncomment the next two lines:
--    #ldflags="-static"
--    #so='none'
--
--	# In addition, on some systems there is a problem with perl and NDBM
--	# which causes AnyDBM and NDBM_File to lock up. This is evidenced
--	# in the tests as AnyDBM just freezing.  Apparently, this only
--	# happens on a.out systems, so we disable NDBM for all a.out linux
--	# systems.  If someone can suggest a more robust test
--	#  that would be appreciated.
--	#
--	# More info:
--	# Date: Wed, 7 Feb 1996 03:21:04 +0900
--	# From: Jeffrey Friedl <jfriedl@nff.ncl.omron.co.jp>
--	#
--	# I tried compiling with DBM support and sure enough things locked up
--	# just as advertised. Checking into it, I found that the lockup was
--	# during the call to dbm_open. Not *in* dbm_open -- but between the call
--	# to and the jump into.
--	#
--	# To make a long story short, making sure that the *.a and *.sa pairs of
--	#   /usr/lib/lib{m,db,gdbm}.{a,sa}
--	# were perfectly in sync took care of it.
--	#
--	# This will generate a harmless Whoa There! message
--	case "$d_dbm_open" in
--	'')	cat <<'EOM' >&4
--
--Disabling ndbm.  This will generate a Whoa There message in Configure.
--Read hints/linux.sh for further information.
--EOM
--		# You can override this with Configure -Dd_dbm_open
--		d_dbm_open=undef
--		;;
--	esac
--fi
--
--rm -f try.c a.out
--
- if ${sh:-/bin/sh} -c exit; then
-   echo ''
-   echo 'You appear to have a working bash.  Good.'
-@@ -497,7 +441,7 @@ then
-        DBLIB="$DBDIR/libdb.so"
-        if [ -f $DBLIB ]
-        then
--         if ${nm:-nm} -u $DBLIB | grep pthread >/dev/null
-+         if ${nm:-nm} -u $DBLIB 2>/dev/null | grep pthread >/dev/null
-          then
-            if ldd $DBLIB | grep pthread >/dev/null
-            then
-diff --git a/pp.c b/pp.c
-index 4ec6887..729239c 100644
---- a/pp.c
-+++ b/pp.c
-@@ -3435,8 +3435,12 @@ PP(pp_crypt)
- #if defined(__GLIBC__) || defined(__EMX__)
- 	if (PL_reentrant_buffer->_crypt_struct_buffer) {
- 	    PL_reentrant_buffer->_crypt_struct_buffer->initialized = 0;
--	    /* work around glibc-2.2.5 bug */
-+#if (defined(__GLIBC__) && __GLIBC__ == 2) && \
-+    (defined(__GLIBC_MINOR__) && __GLIBC_MINOR__ >= 2 && __GLIBC_MINOR__ < 4)
-+	    /* work around glibc-2.2.5 bug, has been fixed at some
-+	     * time in glibc-2.3.X */
- 	    PL_reentrant_buffer->_crypt_struct_buffer->current_saltbits = 0;
-+#endif
- 	}
- #endif
-     }

5.020.003-main,debugging,threaded-bullseye/Dockerfile

@@ -1,59 +0,0 @@
-FROM debian:bullseye-backports
-LABEL maintainer="Ryan Voots <simcop@cpan.org>"
-
-COPY *.patch /usr/src/perl/
-WORKDIR /usr/src/perl
-
-ENV DEBIAN_FRONTEND=noninteractive
-
-RUN perl -i.bak -pE '$x=$_; $x=~s|^deb |deb-src |g;$_.=$x' /etc/apt/sources.list \
-    && apt update \
-    && apt -yq full-upgrade \
-    && apt -yq build-dep perl \
-    &&     apt-get install -y --no-install-recommends \
-       bzip2 \
-       ca-certificates \
-       # cpio \
-       curl \
-       dpkg-dev \
-       # file \
-       gcc \
-       # g++ \
-       libbz2-dev \
-       libdb-dev \
-       libc6-dev \
-       libgdbm-dev \
-       liblzma-dev \
-       make \
-       netbase \
-       patch \
-       procps \
-       zlib1g-dev \
-       xz-utils \
-    && curl -SL https://www.cpan.org/src/5.0/perl-5.20.3.tar.bz2 -o perl-5.20.3.tar.bz2 \
-    && echo '1b40068166c242e34a536836286e70b78410602a80615143301e52aa2901493b *perl-5.20.3.tar.bz2' | sha256sum -c -
-RUN tar --strip-components=1 -xaf perl-5.20.3.tar.bz2 -C /usr/src/perl \
-    && rm perl-5.20.3.tar.bz2 \
-    && cat *.patch | patch -p1 \
-    && echo 'print "1..0 # Skipped: Tests are invalid"' > /usr/src/perl/ext/GDBM_File/t/fatal.t
-RUN gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)" \
-    && archBits="$(dpkg-architecture --query DEB_BUILD_ARCH_BITS)" \
-    && archFlag="$([ "$archBits" = '64' ] && echo '-Duse64bitall' || echo '-Duse64bitint')" \
-    && ./Configure -Darchname="$gnuArch" "$archFlag" -Accflags=-ggdb -DDEBUGGING -Dusethreads -Duseshrplib -Dvendorprefix=/usr/local -Aldflags='-Wl,-z,now -Wl,-zrelro -Wl,-z,noexecstack' -Accflags='-fpie -fPIC -fstack-protector-all -pie -D_FORTIFY_SOURCE=2' -Duseshrplib  -des \
-    && make -j$(nproc) \
-    && TEST_JOBS=$(nproc) make test_harness
-RUN make install \
-    && cd /usr/src \
-    && curl -LO https://www.cpan.org/authors/id/M/MI/MIYAGAWA/App-cpanminus-1.7044.tar.gz \
-    && echo '9b60767fe40752ef7a9d3f13f19060a63389a5c23acc3e9827e19b75500f81f3 *App-cpanminus-1.7044.tar.gz' | sha256sum -c - \
-    && tar -xzf App-cpanminus-1.7044.tar.gz && cd App-cpanminus-1.7044 && perl bin/cpanm . && cd /root \
-    && savedPackages="make netbase" \
-    && apt-mark auto '.*' > /dev/null \
-    && apt-mark manual $savedPackages \
-    && apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false \
-    && rm -fr /var/cache/apt/* /var/lib/apt/lists/* \
-    && rm -fr ./cpanm /root/.cpanm /usr/src/perl /usr/src/App-cpanminus-1.7044* /tmp/*
-
-WORKDIR /
-
-CMD ["perl5.20.3","-de0"]

5.020.003-main,debugging,threaded-bullseye/fix-pack-longdouble.patch

@@ -1,41 +0,0 @@
-From a2db6c92fc2880ba1f288b6c4599a779997dd4e7 Mon Sep 17 00:00:00 2001
-From: Tony Cook <tony@develop-help.com>
-Date: Thu, 9 Apr 2015 15:45:16 +1000
-Subject: [PATCH] [perl #123971] fix long double pack padding on newer GCC
-
----
- pp_pack.c |   11 +++++++++++
- 1 file changed, 11 insertions(+)
-
-diff --git a/pp_pack.c b/pp_pack.c
-index 06adade..1d732a8 100644
---- a/pp_pack.c
-+++ b/pp_pack.c
-@@ -2709,6 +2709,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		anv.nv = sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(anv.bytes+10, sizeof(anv.bytes) - 10, U8);
-+#    endif
- #else
- 		anv.nv = SvNV(fromstr);
- #endif
-@@ -2726,6 +2732,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #  ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		aldouble.ld = (long double)sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(aldouble.bytes+10, sizeof(aldouble.bytes) - 10, U8);
-+#    endif
- #  else
- 		aldouble.ld = (long double)SvNV(fromstr);
- #  endif
--- 
-1.7.10.4
-
-

5.020.003-main,debugging,threaded-buster/DevelPatchPerl.patch

@@ -1,281 +0,0 @@
-diff --git a/Configure b/Configure
-index 438b926..a762f78 100755
---- a/Configure
-+++ b/Configure
-@@ -4591,7 +4591,7 @@ else
- fi
- $rm -f try try.*
- case "$gccversion" in
--1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-+1.*) cpp=`./loc gcc-cpp $cpp $pth` ;;
- esac
- case "$gccversion" in
- '') gccosandvers='' ;;
-@@ -4631,7 +4631,7 @@ esac
- # gcc 3.* complain about adding -Idirectories that they already know about,
- # so we will take those off from locincpth.
- case "$gccversion" in
--3*)
-+3.*)
-     echo "main(){}">try.c
-     for incdir in $locincpth; do
-        warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
-@@ -5328,13 +5328,13 @@ fi
- case "$hint" in
- default|recommended)
- 	case "$gccversion" in
--	1*) dflt="$dflt -fpcc-struct-return" ;;
-+	1.*) dflt="$dflt -fpcc-struct-return" ;;
- 	esac
- 	case "$optimize:$DEBUGGING" in
- 	*-g*:old) dflt="$dflt -DDEBUGGING";;
- 	esac
- 	case "$gccversion" in
--	2*) if $test -d /etc/conf/kconfig.d &&
-+	2.*) if $test -d /etc/conf/kconfig.d &&
- 			$contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- 		then
- 			# Interactive Systems (ISC) POSIX mode.
-@@ -5343,7 +5343,7 @@ default|recommended)
- 		;;
- 	esac
- 	case "$gccversion" in
--	1*) ;;
-+	1.*) ;;
- 	2.[0-8]*) ;;
- 	?*)	set strict-aliasing -fno-strict-aliasing
- 		eval $checkccflag
-@@ -5445,7 +5445,7 @@ case "$cppflags" in
- *)  cppflags="$cppflags $ccflags" ;;
- esac
- case "$gccversion" in
--1*) cppflags="$cppflags -D__GNUC__"
-+1.*) cppflags="$cppflags -D__GNUC__"
- esac
- case "$mips_type" in
- '');;
-diff --git a/cpan/Time-Local/t/Local.t b/cpan/Time-Local/t/Local.t
-index 472e71a..0a852a0 100644
---- a/cpan/Time-Local/t/Local.t
-+++ b/cpan/Time-Local/t/Local.t
-@@ -91,7 +91,7 @@ for (@time, @neg_time) {
- 
-         # Test timelocal()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timelocal($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = localtime($time);
-@@ -107,7 +107,7 @@ for (@time, @neg_time) {
- 
-         # Test timegm()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timegm($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = gmtime($time);
-@@ -125,7 +125,6 @@ for (@time, @neg_time) {
- 
- for (@bad_time) {
-     my($year, $mon, $mday, $hour, $min, $sec) = @$_;
--    $year -= 1900;
-     $mon--;
- 
-     eval { timegm($sec,$min,$hour,$mday,$mon,$year) };
-@@ -134,14 +133,14 @@ for (@bad_time) {
- }
- 
- {
--    is(timelocal(0,0,1,1,0,90) - timelocal(0,0,0,1,0,90), 3600,
-+    is(timelocal(0,0,1,1,0,1990) - timelocal(0,0,0,1,0,1990), 3600,
-        'one hour difference between two calls to timelocal');
- 
--    is(timelocal(1,2,3,1,0,100) - timelocal(1,2,3,31,11,99), 24 * 3600,
-+    is(timelocal(1,2,3,1,0,2000) - timelocal(1,2,3,31,11,1999), 24 * 3600,
-        'one day difference between two calls to timelocal');
- 
-     # Diff beween Jan 1, 1980 and Mar 1, 1980 = (31 + 29 = 60 days)
--    is(timegm(0,0,0, 1, 2, 80) - timegm(0,0,0, 1, 0, 80), 60 * 24 * 3600,
-+    is(timegm(0,0,0, 1, 2, 1980) - timegm(0,0,0, 1, 0, 1980), 60 * 24 * 3600,
-        '60 day difference between two calls to timegm');
- }
- 
-diff --git a/hints/linux.sh b/hints/linux.sh
-index 956adfc..c749f0f 100644
---- a/hints/linux.sh
-+++ b/hints/linux.sh
-@@ -85,7 +85,7 @@ uname_minus_m="${uname_minus_m:-"$targetarch"}"
- 
- # Check if we're about to use Intel's ICC compiler
- case "`${cc:-cc} -V 2>&1`" in
--*"Intel(R) C++ Compiler"*|*"Intel(R) C Compiler"*)
-+*"Intel(R) C"*" Compiler"*)
-     # record the version, formats:
-     # icc (ICC) 10.1 20080801
-     # icpc (ICC) 10.1 20080801
-@@ -165,6 +165,9 @@ esac
- # plibpth to bypass this check.
- if [ -x /usr/bin/gcc ] ; then
-     gcc=/usr/bin/gcc
-+# clang also provides -print-search-dirs
-+elif ${cc:-cc} --version 2>/dev/null | grep -q '^clang ' ; then
-+    gcc=${cc:-cc}
- else
-     gcc=gcc
- fi
-@@ -178,6 +181,33 @@ case "$plibpth" in
-     ;;
- esac
- 
-+# For the musl libc, perl should #define _GNU_SOURCE.  Otherwise, some
-+# available functions, like memem, won't be used.  See the discussion in
-+# [perl #133760].  musl doesn't offer an easy way to identify it, but,
-+# at least on alpine linux, the ldd --version output contains the
-+# string 'musl.'
-+case `ldd --version 2>&1` in
-+    musl*)  ccflags="$ccflags -D_GNU_SOURCE" ;;
-+        *) ;;
-+esac
-+
-+# libquadmath is sometimes installed as gcc internal library,
-+# so contrary to our usual policy of *not* looking at gcc internal
-+# directories we now *do* look at them, in case they contain
-+# the quadmath library.
-+# XXX This may apply to other gcc internal libraries, if such exist.
-+# XXX This could be at Configure level, but then the $gcc is messy.
-+case "$usequadmath" in
-+"$define")
-+  for d in `LANG=C LC_ALL=C $gcc $ccflags $ldflags -print-search-dirs | grep libraries | cut -f2- -d= | tr ':' $trnl | grep 'gcc' | sed -e 's:/$::'`
-+  do
-+    case `ls $d/*libquadmath*$so* 2>/dev/null` in
-+    $d/*libquadmath*$so*) xlibpth="$xlibpth $d" ;;
-+    esac
-+  done
-+  ;;
-+esac
-+
- case "$libc" in
- '')
- # If you have glibc, then report the version for ./myconfig bug reporting.
-@@ -204,92 +234,6 @@ case "$libc" in
-     ;;
- esac
- 
--# Are we using ELF?  Thanks to Kenneth Albanowski <kjahds@kjahds.com>
--# for this test.
--cat >try.c <<'EOM'
--/* Test for whether ELF binaries are produced */
--#include <fcntl.h>
--#include <stdlib.h>
--#include <unistd.h>
--main() {
--	char buffer[4];
--	int i=open("a.out",O_RDONLY);
--	if(i==-1)
--		exit(1); /* fail */
--	if(read(i,&buffer[0],4)<4)
--		exit(1); /* fail */
--	if(buffer[0] != 127 || buffer[1] != 'E' ||
--           buffer[2] != 'L' || buffer[3] != 'F')
--		exit(1); /* fail */
--	exit(0); /* succeed (yes, it's ELF) */
--}
--EOM
--if ${cc:-gcc} $ccflags $ldflags try.c >/dev/null 2>&1 && $run ./a.out; then
--    cat <<'EOM' >&4
--
--You appear to have ELF support.  I'll try to use it for dynamic loading.
--If dynamic loading doesn't work, read hints/linux.sh for further information.
--EOM
--
--else
--    cat <<'EOM' >&4
--
--You don't have an ELF gcc.  I will use dld if possible.  If you are
--using a version of DLD earlier than 3.2.6, or don't have it at all, you
--should probably upgrade. If you are forced to use 3.2.4, you should
--uncomment a couple of lines in hints/linux.sh and restart Configure so
--that shared libraries will be disallowed.
--
--EOM
--    lddlflags="-r $lddlflags"
--    # These empty values are so that Configure doesn't put in the
--    # Linux ELF values.
--    ccdlflags=' '
--    cccdlflags=' '
--    ccflags="-DOVR_DBL_DIG=14 $ccflags"
--    so='sa'
--    dlext='o'
--    nm_so_opt=' '
--    ## If you are using DLD 3.2.4 which does not support shared libs,
--    ## uncomment the next two lines:
--    #ldflags="-static"
--    #so='none'
--
--	# In addition, on some systems there is a problem with perl and NDBM
--	# which causes AnyDBM and NDBM_File to lock up. This is evidenced
--	# in the tests as AnyDBM just freezing.  Apparently, this only
--	# happens on a.out systems, so we disable NDBM for all a.out linux
--	# systems.  If someone can suggest a more robust test
--	#  that would be appreciated.
--	#
--	# More info:
--	# Date: Wed, 7 Feb 1996 03:21:04 +0900
--	# From: Jeffrey Friedl <jfriedl@nff.ncl.omron.co.jp>
--	#
--	# I tried compiling with DBM support and sure enough things locked up
--	# just as advertised. Checking into it, I found that the lockup was
--	# during the call to dbm_open. Not *in* dbm_open -- but between the call
--	# to and the jump into.
--	#
--	# To make a long story short, making sure that the *.a and *.sa pairs of
--	#   /usr/lib/lib{m,db,gdbm}.{a,sa}
--	# were perfectly in sync took care of it.
--	#
--	# This will generate a harmless Whoa There! message
--	case "$d_dbm_open" in
--	'')	cat <<'EOM' >&4
--
--Disabling ndbm.  This will generate a Whoa There message in Configure.
--Read hints/linux.sh for further information.
--EOM
--		# You can override this with Configure -Dd_dbm_open
--		d_dbm_open=undef
--		;;
--	esac
--fi
--
--rm -f try.c a.out
--
- if ${sh:-/bin/sh} -c exit; then
-   echo ''
-   echo 'You appear to have a working bash.  Good.'
-@@ -497,7 +441,7 @@ then
-        DBLIB="$DBDIR/libdb.so"
-        if [ -f $DBLIB ]
-        then
--         if ${nm:-nm} -u $DBLIB | grep pthread >/dev/null
-+         if ${nm:-nm} -u $DBLIB 2>/dev/null | grep pthread >/dev/null
-          then
-            if ldd $DBLIB | grep pthread >/dev/null
-            then
-diff --git a/pp.c b/pp.c
-index 4ec6887..729239c 100644
---- a/pp.c
-+++ b/pp.c
-@@ -3435,8 +3435,12 @@ PP(pp_crypt)
- #if defined(__GLIBC__) || defined(__EMX__)
- 	if (PL_reentrant_buffer->_crypt_struct_buffer) {
- 	    PL_reentrant_buffer->_crypt_struct_buffer->initialized = 0;
--	    /* work around glibc-2.2.5 bug */
-+#if (defined(__GLIBC__) && __GLIBC__ == 2) && \
-+    (defined(__GLIBC_MINOR__) && __GLIBC_MINOR__ >= 2 && __GLIBC_MINOR__ < 4)
-+	    /* work around glibc-2.2.5 bug, has been fixed at some
-+	     * time in glibc-2.3.X */
- 	    PL_reentrant_buffer->_crypt_struct_buffer->current_saltbits = 0;
-+#endif
- 	}
- #endif
-     }

5.020.003-main,debugging,threaded-buster/Dockerfile

@@ -1,59 +0,0 @@
-FROM debian:buster-backports
-LABEL maintainer="Ryan Voots <simcop@cpan.org>"
-
-COPY *.patch /usr/src/perl/
-WORKDIR /usr/src/perl
-
-ENV DEBIAN_FRONTEND=noninteractive
-
-RUN perl -i.bak -pE '$x=$_; $x=~s|^deb |deb-src |g;$_.=$x' /etc/apt/sources.list \
-    && apt update \
-    && apt -yq full-upgrade \
-    && apt -yq build-dep perl \
-    &&     apt-get install -y --no-install-recommends \
-       bzip2 \
-       ca-certificates \
-       # cpio \
-       curl \
-       dpkg-dev \
-       # file \
-       gcc \
-       # g++ \
-       libbz2-dev \
-       libdb-dev \
-       libc6-dev \
-       libgdbm-dev \
-       liblzma-dev \
-       make \
-       netbase \
-       patch \
-       procps \
-       zlib1g-dev \
-       xz-utils \
-    && curl -SL https://www.cpan.org/src/5.0/perl-5.20.3.tar.bz2 -o perl-5.20.3.tar.bz2 \
-    && echo '1b40068166c242e34a536836286e70b78410602a80615143301e52aa2901493b *perl-5.20.3.tar.bz2' | sha256sum -c -
-RUN tar --strip-components=1 -xaf perl-5.20.3.tar.bz2 -C /usr/src/perl \
-    && rm perl-5.20.3.tar.bz2 \
-    && cat *.patch | patch -p1 \
-    && echo 'print "1..0 # Skipped: Tests are invalid"' > /usr/src/perl/ext/GDBM_File/t/fatal.t
-RUN gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)" \
-    && archBits="$(dpkg-architecture --query DEB_BUILD_ARCH_BITS)" \
-    && archFlag="$([ "$archBits" = '64' ] && echo '-Duse64bitall' || echo '-Duse64bitint')" \
-    && ./Configure -Darchname="$gnuArch" "$archFlag" -Accflags=-ggdb -DDEBUGGING -Dusethreads -Duseshrplib -Dvendorprefix=/usr/local -Aldflags='-Wl,-z,now -Wl,-zrelro -Wl,-z,noexecstack' -Accflags='-fpie -fPIC -fstack-protector-all -pie -D_FORTIFY_SOURCE=2' -Duseshrplib  -des \
-    && make -j$(nproc) \
-    && TEST_JOBS=$(nproc) make test_harness
-RUN make install \
-    && cd /usr/src \
-    && curl -LO https://www.cpan.org/authors/id/M/MI/MIYAGAWA/App-cpanminus-1.7044.tar.gz \
-    && echo '9b60767fe40752ef7a9d3f13f19060a63389a5c23acc3e9827e19b75500f81f3 *App-cpanminus-1.7044.tar.gz' | sha256sum -c - \
-    && tar -xzf App-cpanminus-1.7044.tar.gz && cd App-cpanminus-1.7044 && perl bin/cpanm . && cd /root \
-    && savedPackages="make netbase" \
-    && apt-mark auto '.*' > /dev/null \
-    && apt-mark manual $savedPackages \
-    && apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false \
-    && rm -fr /var/cache/apt/* /var/lib/apt/lists/* \
-    && rm -fr ./cpanm /root/.cpanm /usr/src/perl /usr/src/App-cpanminus-1.7044* /tmp/*
-
-WORKDIR /
-
-CMD ["perl5.20.3","-de0"]

5.020.003-main,debugging,threaded-buster/fix-pack-longdouble.patch

@@ -1,41 +0,0 @@
-From a2db6c92fc2880ba1f288b6c4599a779997dd4e7 Mon Sep 17 00:00:00 2001
-From: Tony Cook <tony@develop-help.com>
-Date: Thu, 9 Apr 2015 15:45:16 +1000
-Subject: [PATCH] [perl #123971] fix long double pack padding on newer GCC
-
----
- pp_pack.c |   11 +++++++++++
- 1 file changed, 11 insertions(+)
-
-diff --git a/pp_pack.c b/pp_pack.c
-index 06adade..1d732a8 100644
---- a/pp_pack.c
-+++ b/pp_pack.c
-@@ -2709,6 +2709,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		anv.nv = sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(anv.bytes+10, sizeof(anv.bytes) - 10, U8);
-+#    endif
- #else
- 		anv.nv = SvNV(fromstr);
- #endif
-@@ -2726,6 +2732,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #  ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		aldouble.ld = (long double)sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(aldouble.bytes+10, sizeof(aldouble.bytes) - 10, U8);
-+#    endif
- #  else
- 		aldouble.ld = (long double)SvNV(fromstr);
- #  endif
--- 
-1.7.10.4
-
-

5.020.003-main,debugging-bullseye/DevelPatchPerl.patch

@@ -1,281 +0,0 @@
-diff --git a/Configure b/Configure
-index 438b926..a762f78 100755
---- a/Configure
-+++ b/Configure
-@@ -4591,7 +4591,7 @@ else
- fi
- $rm -f try try.*
- case "$gccversion" in
--1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-+1.*) cpp=`./loc gcc-cpp $cpp $pth` ;;
- esac
- case "$gccversion" in
- '') gccosandvers='' ;;
-@@ -4631,7 +4631,7 @@ esac
- # gcc 3.* complain about adding -Idirectories that they already know about,
- # so we will take those off from locincpth.
- case "$gccversion" in
--3*)
-+3.*)
-     echo "main(){}">try.c
-     for incdir in $locincpth; do
-        warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
-@@ -5328,13 +5328,13 @@ fi
- case "$hint" in
- default|recommended)
- 	case "$gccversion" in
--	1*) dflt="$dflt -fpcc-struct-return" ;;
-+	1.*) dflt="$dflt -fpcc-struct-return" ;;
- 	esac
- 	case "$optimize:$DEBUGGING" in
- 	*-g*:old) dflt="$dflt -DDEBUGGING";;
- 	esac
- 	case "$gccversion" in
--	2*) if $test -d /etc/conf/kconfig.d &&
-+	2.*) if $test -d /etc/conf/kconfig.d &&
- 			$contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- 		then
- 			# Interactive Systems (ISC) POSIX mode.
-@@ -5343,7 +5343,7 @@ default|recommended)
- 		;;
- 	esac
- 	case "$gccversion" in
--	1*) ;;
-+	1.*) ;;
- 	2.[0-8]*) ;;
- 	?*)	set strict-aliasing -fno-strict-aliasing
- 		eval $checkccflag
-@@ -5445,7 +5445,7 @@ case "$cppflags" in
- *)  cppflags="$cppflags $ccflags" ;;
- esac
- case "$gccversion" in
--1*) cppflags="$cppflags -D__GNUC__"
-+1.*) cppflags="$cppflags -D__GNUC__"
- esac
- case "$mips_type" in
- '');;
-diff --git a/cpan/Time-Local/t/Local.t b/cpan/Time-Local/t/Local.t
-index 472e71a..0a852a0 100644
---- a/cpan/Time-Local/t/Local.t
-+++ b/cpan/Time-Local/t/Local.t
-@@ -91,7 +91,7 @@ for (@time, @neg_time) {
- 
-         # Test timelocal()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timelocal($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = localtime($time);
-@@ -107,7 +107,7 @@ for (@time, @neg_time) {
- 
-         # Test timegm()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timegm($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = gmtime($time);
-@@ -125,7 +125,6 @@ for (@time, @neg_time) {
- 
- for (@bad_time) {
-     my($year, $mon, $mday, $hour, $min, $sec) = @$_;
--    $year -= 1900;
-     $mon--;
- 
-     eval { timegm($sec,$min,$hour,$mday,$mon,$year) };
-@@ -134,14 +133,14 @@ for (@bad_time) {
- }
- 
- {
--    is(timelocal(0,0,1,1,0,90) - timelocal(0,0,0,1,0,90), 3600,
-+    is(timelocal(0,0,1,1,0,1990) - timelocal(0,0,0,1,0,1990), 3600,
-        'one hour difference between two calls to timelocal');
- 
--    is(timelocal(1,2,3,1,0,100) - timelocal(1,2,3,31,11,99), 24 * 3600,
-+    is(timelocal(1,2,3,1,0,2000) - timelocal(1,2,3,31,11,1999), 24 * 3600,
-        'one day difference between two calls to timelocal');
- 
-     # Diff beween Jan 1, 1980 and Mar 1, 1980 = (31 + 29 = 60 days)
--    is(timegm(0,0,0, 1, 2, 80) - timegm(0,0,0, 1, 0, 80), 60 * 24 * 3600,
-+    is(timegm(0,0,0, 1, 2, 1980) - timegm(0,0,0, 1, 0, 1980), 60 * 24 * 3600,
-        '60 day difference between two calls to timegm');
- }
- 
-diff --git a/hints/linux.sh b/hints/linux.sh
-index 956adfc..c749f0f 100644
---- a/hints/linux.sh
-+++ b/hints/linux.sh
-@@ -85,7 +85,7 @@ uname_minus_m="${uname_minus_m:-"$targetarch"}"
- 
- # Check if we're about to use Intel's ICC compiler
- case "`${cc:-cc} -V 2>&1`" in
--*"Intel(R) C++ Compiler"*|*"Intel(R) C Compiler"*)
-+*"Intel(R) C"*" Compiler"*)
-     # record the version, formats:
-     # icc (ICC) 10.1 20080801
-     # icpc (ICC) 10.1 20080801
-@@ -165,6 +165,9 @@ esac
- # plibpth to bypass this check.
- if [ -x /usr/bin/gcc ] ; then
-     gcc=/usr/bin/gcc
-+# clang also provides -print-search-dirs
-+elif ${cc:-cc} --version 2>/dev/null | grep -q '^clang ' ; then
-+    gcc=${cc:-cc}
- else
-     gcc=gcc
- fi
-@@ -178,6 +181,33 @@ case "$plibpth" in
-     ;;
- esac
- 
-+# For the musl libc, perl should #define _GNU_SOURCE.  Otherwise, some
-+# available functions, like memem, won't be used.  See the discussion in
-+# [perl #133760].  musl doesn't offer an easy way to identify it, but,
-+# at least on alpine linux, the ldd --version output contains the
-+# string 'musl.'
-+case `ldd --version 2>&1` in
-+    musl*)  ccflags="$ccflags -D_GNU_SOURCE" ;;
-+        *) ;;
-+esac
-+
-+# libquadmath is sometimes installed as gcc internal library,
-+# so contrary to our usual policy of *not* looking at gcc internal
-+# directories we now *do* look at them, in case they contain
-+# the quadmath library.
-+# XXX This may apply to other gcc internal libraries, if such exist.
-+# XXX This could be at Configure level, but then the $gcc is messy.
-+case "$usequadmath" in
-+"$define")
-+  for d in `LANG=C LC_ALL=C $gcc $ccflags $ldflags -print-search-dirs | grep libraries | cut -f2- -d= | tr ':' $trnl | grep 'gcc' | sed -e 's:/$::'`
-+  do
-+    case `ls $d/*libquadmath*$so* 2>/dev/null` in
-+    $d/*libquadmath*$so*) xlibpth="$xlibpth $d" ;;
-+    esac
-+  done
-+  ;;
-+esac
-+
- case "$libc" in
- '')
- # If you have glibc, then report the version for ./myconfig bug reporting.
-@@ -204,92 +234,6 @@ case "$libc" in
-     ;;
- esac
- 
--# Are we using ELF?  Thanks to Kenneth Albanowski <kjahds@kjahds.com>
--# for this test.
--cat >try.c <<'EOM'
--/* Test for whether ELF binaries are produced */
--#include <fcntl.h>
--#include <stdlib.h>
--#include <unistd.h>
--main() {
--	char buffer[4];
--	int i=open("a.out",O_RDONLY);
--	if(i==-1)
--		exit(1); /* fail */
--	if(read(i,&buffer[0],4)<4)
--		exit(1); /* fail */
--	if(buffer[0] != 127 || buffer[1] != 'E' ||
--           buffer[2] != 'L' || buffer[3] != 'F')
--		exit(1); /* fail */
--	exit(0); /* succeed (yes, it's ELF) */
--}
--EOM
--if ${cc:-gcc} $ccflags $ldflags try.c >/dev/null 2>&1 && $run ./a.out; then
--    cat <<'EOM' >&4
--
--You appear to have ELF support.  I'll try to use it for dynamic loading.
--If dynamic loading doesn't work, read hints/linux.sh for further information.
--EOM
--
--else
--    cat <<'EOM' >&4
--
--You don't have an ELF gcc.  I will use dld if possible.  If you are
--using a version of DLD earlier than 3.2.6, or don't have it at all, you
--should probably upgrade. If you are forced to use 3.2.4, you should
--uncomment a couple of lines in hints/linux.sh and restart Configure so
--that shared libraries will be disallowed.
--
--EOM
--    lddlflags="-r $lddlflags"
--    # These empty values are so that Configure doesn't put in the
--    # Linux ELF values.
--    ccdlflags=' '
--    cccdlflags=' '
--    ccflags="-DOVR_DBL_DIG=14 $ccflags"
--    so='sa'
--    dlext='o'
--    nm_so_opt=' '
--    ## If you are using DLD 3.2.4 which does not support shared libs,
--    ## uncomment the next two lines:
--    #ldflags="-static"
--    #so='none'
--
--	# In addition, on some systems there is a problem with perl and NDBM
--	# which causes AnyDBM and NDBM_File to lock up. This is evidenced
--	# in the tests as AnyDBM just freezing.  Apparently, this only
--	# happens on a.out systems, so we disable NDBM for all a.out linux
--	# systems.  If someone can suggest a more robust test
--	#  that would be appreciated.
--	#
--	# More info:
--	# Date: Wed, 7 Feb 1996 03:21:04 +0900
--	# From: Jeffrey Friedl <jfriedl@nff.ncl.omron.co.jp>
--	#
--	# I tried compiling with DBM support and sure enough things locked up
--	# just as advertised. Checking into it, I found that the lockup was
--	# during the call to dbm_open. Not *in* dbm_open -- but between the call
--	# to and the jump into.
--	#
--	# To make a long story short, making sure that the *.a and *.sa pairs of
--	#   /usr/lib/lib{m,db,gdbm}.{a,sa}
--	# were perfectly in sync took care of it.
--	#
--	# This will generate a harmless Whoa There! message
--	case "$d_dbm_open" in
--	'')	cat <<'EOM' >&4
--
--Disabling ndbm.  This will generate a Whoa There message in Configure.
--Read hints/linux.sh for further information.
--EOM
--		# You can override this with Configure -Dd_dbm_open
--		d_dbm_open=undef
--		;;
--	esac
--fi
--
--rm -f try.c a.out
--
- if ${sh:-/bin/sh} -c exit; then
-   echo ''
-   echo 'You appear to have a working bash.  Good.'
-@@ -497,7 +441,7 @@ then
-        DBLIB="$DBDIR/libdb.so"
-        if [ -f $DBLIB ]
-        then
--         if ${nm:-nm} -u $DBLIB | grep pthread >/dev/null
-+         if ${nm:-nm} -u $DBLIB 2>/dev/null | grep pthread >/dev/null
-          then
-            if ldd $DBLIB | grep pthread >/dev/null
-            then
-diff --git a/pp.c b/pp.c
-index 4ec6887..729239c 100644
---- a/pp.c
-+++ b/pp.c
-@@ -3435,8 +3435,12 @@ PP(pp_crypt)
- #if defined(__GLIBC__) || defined(__EMX__)
- 	if (PL_reentrant_buffer->_crypt_struct_buffer) {
- 	    PL_reentrant_buffer->_crypt_struct_buffer->initialized = 0;
--	    /* work around glibc-2.2.5 bug */
-+#if (defined(__GLIBC__) && __GLIBC__ == 2) && \
-+    (defined(__GLIBC_MINOR__) && __GLIBC_MINOR__ >= 2 && __GLIBC_MINOR__ < 4)
-+	    /* work around glibc-2.2.5 bug, has been fixed at some
-+	     * time in glibc-2.3.X */
- 	    PL_reentrant_buffer->_crypt_struct_buffer->current_saltbits = 0;
-+#endif
- 	}
- #endif
-     }

5.020.003-main,debugging-bullseye/Dockerfile

@@ -1,59 +0,0 @@
-FROM debian:bullseye-backports
-LABEL maintainer="Ryan Voots <simcop@cpan.org>"
-
-COPY *.patch /usr/src/perl/
-WORKDIR /usr/src/perl
-
-ENV DEBIAN_FRONTEND=noninteractive
-
-RUN perl -i.bak -pE '$x=$_; $x=~s|^deb |deb-src |g;$_.=$x' /etc/apt/sources.list \
-    && apt update \
-    && apt -yq full-upgrade \
-    && apt -yq build-dep perl \
-    &&     apt-get install -y --no-install-recommends \
-       bzip2 \
-       ca-certificates \
-       # cpio \
-       curl \
-       dpkg-dev \
-       # file \
-       gcc \
-       # g++ \
-       libbz2-dev \
-       libdb-dev \
-       libc6-dev \
-       libgdbm-dev \
-       liblzma-dev \
-       make \
-       netbase \
-       patch \
-       procps \
-       zlib1g-dev \
-       xz-utils \
-    && curl -SL https://www.cpan.org/src/5.0/perl-5.20.3.tar.bz2 -o perl-5.20.3.tar.bz2 \
-    && echo '1b40068166c242e34a536836286e70b78410602a80615143301e52aa2901493b *perl-5.20.3.tar.bz2' | sha256sum -c -
-RUN tar --strip-components=1 -xaf perl-5.20.3.tar.bz2 -C /usr/src/perl \
-    && rm perl-5.20.3.tar.bz2 \
-    && cat *.patch | patch -p1 \
-    && echo 'print "1..0 # Skipped: Tests are invalid"' > /usr/src/perl/ext/GDBM_File/t/fatal.t
-RUN gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)" \
-    && archBits="$(dpkg-architecture --query DEB_BUILD_ARCH_BITS)" \
-    && archFlag="$([ "$archBits" = '64' ] && echo '-Duse64bitall' || echo '-Duse64bitint')" \
-    && ./Configure -Darchname="$gnuArch" "$archFlag" -Accflags=-ggdb -DDEBUGGING -Duseshrplib -Dvendorprefix=/usr/local -Aldflags='-Wl,-z,now -Wl,-zrelro -Wl,-z,noexecstack' -Accflags='-fpie -fPIC -fstack-protector-all -pie -D_FORTIFY_SOURCE=2' -Duseshrplib  -des \
-    && make -j$(nproc) \
-    && TEST_JOBS=$(nproc) make test_harness
-RUN make install \
-    && cd /usr/src \
-    && curl -LO https://www.cpan.org/authors/id/M/MI/MIYAGAWA/App-cpanminus-1.7044.tar.gz \
-    && echo '9b60767fe40752ef7a9d3f13f19060a63389a5c23acc3e9827e19b75500f81f3 *App-cpanminus-1.7044.tar.gz' | sha256sum -c - \
-    && tar -xzf App-cpanminus-1.7044.tar.gz && cd App-cpanminus-1.7044 && perl bin/cpanm . && cd /root \
-    && savedPackages="make netbase" \
-    && apt-mark auto '.*' > /dev/null \
-    && apt-mark manual $savedPackages \
-    && apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false \
-    && rm -fr /var/cache/apt/* /var/lib/apt/lists/* \
-    && rm -fr ./cpanm /root/.cpanm /usr/src/perl /usr/src/App-cpanminus-1.7044* /tmp/*
-
-WORKDIR /
-
-CMD ["perl5.20.3","-de0"]

5.020.003-main,debugging-bullseye/fix-pack-longdouble.patch

@@ -1,41 +0,0 @@
-From a2db6c92fc2880ba1f288b6c4599a779997dd4e7 Mon Sep 17 00:00:00 2001
-From: Tony Cook <tony@develop-help.com>
-Date: Thu, 9 Apr 2015 15:45:16 +1000
-Subject: [PATCH] [perl #123971] fix long double pack padding on newer GCC
-
----
- pp_pack.c |   11 +++++++++++
- 1 file changed, 11 insertions(+)
-
-diff --git a/pp_pack.c b/pp_pack.c
-index 06adade..1d732a8 100644
---- a/pp_pack.c
-+++ b/pp_pack.c
-@@ -2709,6 +2709,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		anv.nv = sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(anv.bytes+10, sizeof(anv.bytes) - 10, U8);
-+#    endif
- #else
- 		anv.nv = SvNV(fromstr);
- #endif
-@@ -2726,6 +2732,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #  ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		aldouble.ld = (long double)sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(aldouble.bytes+10, sizeof(aldouble.bytes) - 10, U8);
-+#    endif
- #  else
- 		aldouble.ld = (long double)SvNV(fromstr);
- #  endif
--- 
-1.7.10.4
-
-

5.020.003-main,debugging-buster/DevelPatchPerl.patch

@@ -1,281 +0,0 @@
-diff --git a/Configure b/Configure
-index 438b926..a762f78 100755
---- a/Configure
-+++ b/Configure
-@@ -4591,7 +4591,7 @@ else
- fi
- $rm -f try try.*
- case "$gccversion" in
--1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-+1.*) cpp=`./loc gcc-cpp $cpp $pth` ;;
- esac
- case "$gccversion" in
- '') gccosandvers='' ;;
-@@ -4631,7 +4631,7 @@ esac
- # gcc 3.* complain about adding -Idirectories that they already know about,
- # so we will take those off from locincpth.
- case "$gccversion" in
--3*)
-+3.*)
-     echo "main(){}">try.c
-     for incdir in $locincpth; do
-        warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
-@@ -5328,13 +5328,13 @@ fi
- case "$hint" in
- default|recommended)
- 	case "$gccversion" in
--	1*) dflt="$dflt -fpcc-struct-return" ;;
-+	1.*) dflt="$dflt -fpcc-struct-return" ;;
- 	esac
- 	case "$optimize:$DEBUGGING" in
- 	*-g*:old) dflt="$dflt -DDEBUGGING";;
- 	esac
- 	case "$gccversion" in
--	2*) if $test -d /etc/conf/kconfig.d &&
-+	2.*) if $test -d /etc/conf/kconfig.d &&
- 			$contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- 		then
- 			# Interactive Systems (ISC) POSIX mode.
-@@ -5343,7 +5343,7 @@ default|recommended)
- 		;;
- 	esac
- 	case "$gccversion" in
--	1*) ;;
-+	1.*) ;;
- 	2.[0-8]*) ;;
- 	?*)	set strict-aliasing -fno-strict-aliasing
- 		eval $checkccflag
-@@ -5445,7 +5445,7 @@ case "$cppflags" in
- *)  cppflags="$cppflags $ccflags" ;;
- esac
- case "$gccversion" in
--1*) cppflags="$cppflags -D__GNUC__"
-+1.*) cppflags="$cppflags -D__GNUC__"
- esac
- case "$mips_type" in
- '');;
-diff --git a/cpan/Time-Local/t/Local.t b/cpan/Time-Local/t/Local.t
-index 472e71a..0a852a0 100644
---- a/cpan/Time-Local/t/Local.t
-+++ b/cpan/Time-Local/t/Local.t
-@@ -91,7 +91,7 @@ for (@time, @neg_time) {
- 
-         # Test timelocal()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timelocal($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = localtime($time);
-@@ -107,7 +107,7 @@ for (@time, @neg_time) {
- 
-         # Test timegm()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timegm($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = gmtime($time);
-@@ -125,7 +125,6 @@ for (@time, @neg_time) {
- 
- for (@bad_time) {
-     my($year, $mon, $mday, $hour, $min, $sec) = @$_;
--    $year -= 1900;
-     $mon--;
- 
-     eval { timegm($sec,$min,$hour,$mday,$mon,$year) };
-@@ -134,14 +133,14 @@ for (@bad_time) {
- }
- 
- {
--    is(timelocal(0,0,1,1,0,90) - timelocal(0,0,0,1,0,90), 3600,
-+    is(timelocal(0,0,1,1,0,1990) - timelocal(0,0,0,1,0,1990), 3600,
-        'one hour difference between two calls to timelocal');
- 
--    is(timelocal(1,2,3,1,0,100) - timelocal(1,2,3,31,11,99), 24 * 3600,
-+    is(timelocal(1,2,3,1,0,2000) - timelocal(1,2,3,31,11,1999), 24 * 3600,
-        'one day difference between two calls to timelocal');
- 
-     # Diff beween Jan 1, 1980 and Mar 1, 1980 = (31 + 29 = 60 days)
--    is(timegm(0,0,0, 1, 2, 80) - timegm(0,0,0, 1, 0, 80), 60 * 24 * 3600,
-+    is(timegm(0,0,0, 1, 2, 1980) - timegm(0,0,0, 1, 0, 1980), 60 * 24 * 3600,
-        '60 day difference between two calls to timegm');
- }
- 
-diff --git a/hints/linux.sh b/hints/linux.sh
-index 956adfc..c749f0f 100644
---- a/hints/linux.sh
-+++ b/hints/linux.sh
-@@ -85,7 +85,7 @@ uname_minus_m="${uname_minus_m:-"$targetarch"}"
- 
- # Check if we're about to use Intel's ICC compiler
- case "`${cc:-cc} -V 2>&1`" in
--*"Intel(R) C++ Compiler"*|*"Intel(R) C Compiler"*)
-+*"Intel(R) C"*" Compiler"*)
-     # record the version, formats:
-     # icc (ICC) 10.1 20080801
-     # icpc (ICC) 10.1 20080801
-@@ -165,6 +165,9 @@ esac
- # plibpth to bypass this check.
- if [ -x /usr/bin/gcc ] ; then
-     gcc=/usr/bin/gcc
-+# clang also provides -print-search-dirs
-+elif ${cc:-cc} --version 2>/dev/null | grep -q '^clang ' ; then
-+    gcc=${cc:-cc}
- else
-     gcc=gcc
- fi
-@@ -178,6 +181,33 @@ case "$plibpth" in
-     ;;
- esac
- 
-+# For the musl libc, perl should #define _GNU_SOURCE.  Otherwise, some
-+# available functions, like memem, won't be used.  See the discussion in
-+# [perl #133760].  musl doesn't offer an easy way to identify it, but,
-+# at least on alpine linux, the ldd --version output contains the
-+# string 'musl.'
-+case `ldd --version 2>&1` in
-+    musl*)  ccflags="$ccflags -D_GNU_SOURCE" ;;
-+        *) ;;
-+esac
-+
-+# libquadmath is sometimes installed as gcc internal library,
-+# so contrary to our usual policy of *not* looking at gcc internal
-+# directories we now *do* look at them, in case they contain
-+# the quadmath library.
-+# XXX This may apply to other gcc internal libraries, if such exist.
-+# XXX This could be at Configure level, but then the $gcc is messy.
-+case "$usequadmath" in
-+"$define")
-+  for d in `LANG=C LC_ALL=C $gcc $ccflags $ldflags -print-search-dirs | grep libraries | cut -f2- -d= | tr ':' $trnl | grep 'gcc' | sed -e 's:/$::'`
-+  do
-+    case `ls $d/*libquadmath*$so* 2>/dev/null` in
-+    $d/*libquadmath*$so*) xlibpth="$xlibpth $d" ;;
-+    esac
-+  done
-+  ;;
-+esac
-+
- case "$libc" in
- '')
- # If you have glibc, then report the version for ./myconfig bug reporting.
-@@ -204,92 +234,6 @@ case "$libc" in
-     ;;
- esac
- 
--# Are we using ELF?  Thanks to Kenneth Albanowski <kjahds@kjahds.com>
--# for this test.
--cat >try.c <<'EOM'
--/* Test for whether ELF binaries are produced */
--#include <fcntl.h>
--#include <stdlib.h>
--#include <unistd.h>
--main() {
--	char buffer[4];
--	int i=open("a.out",O_RDONLY);
--	if(i==-1)
--		exit(1); /* fail */
--	if(read(i,&buffer[0],4)<4)
--		exit(1); /* fail */
--	if(buffer[0] != 127 || buffer[1] != 'E' ||
--           buffer[2] != 'L' || buffer[3] != 'F')
--		exit(1); /* fail */
--	exit(0); /* succeed (yes, it's ELF) */
--}
--EOM
--if ${cc:-gcc} $ccflags $ldflags try.c >/dev/null 2>&1 && $run ./a.out; then
--    cat <<'EOM' >&4
--
--You appear to have ELF support.  I'll try to use it for dynamic loading.
--If dynamic loading doesn't work, read hints/linux.sh for further information.
--EOM
--
--else
--    cat <<'EOM' >&4
--
--You don't have an ELF gcc.  I will use dld if possible.  If you are
--using a version of DLD earlier than 3.2.6, or don't have it at all, you
--should probably upgrade. If you are forced to use 3.2.4, you should
--uncomment a couple of lines in hints/linux.sh and restart Configure so
--that shared libraries will be disallowed.
--
--EOM
--    lddlflags="-r $lddlflags"
--    # These empty values are so that Configure doesn't put in the
--    # Linux ELF values.
--    ccdlflags=' '
--    cccdlflags=' '
--    ccflags="-DOVR_DBL_DIG=14 $ccflags"
--    so='sa'
--    dlext='o'
--    nm_so_opt=' '
--    ## If you are using DLD 3.2.4 which does not support shared libs,
--    ## uncomment the next two lines:
--    #ldflags="-static"
--    #so='none'
--
--	# In addition, on some systems there is a problem with perl and NDBM
--	# which causes AnyDBM and NDBM_File to lock up. This is evidenced
--	# in the tests as AnyDBM just freezing.  Apparently, this only
--	# happens on a.out systems, so we disable NDBM for all a.out linux
--	# systems.  If someone can suggest a more robust test
--	#  that would be appreciated.
--	#
--	# More info:
--	# Date: Wed, 7 Feb 1996 03:21:04 +0900
--	# From: Jeffrey Friedl <jfriedl@nff.ncl.omron.co.jp>
--	#
--	# I tried compiling with DBM support and sure enough things locked up
--	# just as advertised. Checking into it, I found that the lockup was
--	# during the call to dbm_open. Not *in* dbm_open -- but between the call
--	# to and the jump into.
--	#
--	# To make a long story short, making sure that the *.a and *.sa pairs of
--	#   /usr/lib/lib{m,db,gdbm}.{a,sa}
--	# were perfectly in sync took care of it.
--	#
--	# This will generate a harmless Whoa There! message
--	case "$d_dbm_open" in
--	'')	cat <<'EOM' >&4
--
--Disabling ndbm.  This will generate a Whoa There message in Configure.
--Read hints/linux.sh for further information.
--EOM
--		# You can override this with Configure -Dd_dbm_open
--		d_dbm_open=undef
--		;;
--	esac
--fi
--
--rm -f try.c a.out
--
- if ${sh:-/bin/sh} -c exit; then
-   echo ''
-   echo 'You appear to have a working bash.  Good.'
-@@ -497,7 +441,7 @@ then
-        DBLIB="$DBDIR/libdb.so"
-        if [ -f $DBLIB ]
-        then
--         if ${nm:-nm} -u $DBLIB | grep pthread >/dev/null
-+         if ${nm:-nm} -u $DBLIB 2>/dev/null | grep pthread >/dev/null
-          then
-            if ldd $DBLIB | grep pthread >/dev/null
-            then
-diff --git a/pp.c b/pp.c
-index 4ec6887..729239c 100644
---- a/pp.c
-+++ b/pp.c
-@@ -3435,8 +3435,12 @@ PP(pp_crypt)
- #if defined(__GLIBC__) || defined(__EMX__)
- 	if (PL_reentrant_buffer->_crypt_struct_buffer) {
- 	    PL_reentrant_buffer->_crypt_struct_buffer->initialized = 0;
--	    /* work around glibc-2.2.5 bug */
-+#if (defined(__GLIBC__) && __GLIBC__ == 2) && \
-+    (defined(__GLIBC_MINOR__) && __GLIBC_MINOR__ >= 2 && __GLIBC_MINOR__ < 4)
-+	    /* work around glibc-2.2.5 bug, has been fixed at some
-+	     * time in glibc-2.3.X */
- 	    PL_reentrant_buffer->_crypt_struct_buffer->current_saltbits = 0;
-+#endif
- 	}
- #endif
-     }

5.020.003-main,debugging-buster/Dockerfile

@@ -1,59 +0,0 @@
-FROM debian:buster-backports
-LABEL maintainer="Ryan Voots <simcop@cpan.org>"
-
-COPY *.patch /usr/src/perl/
-WORKDIR /usr/src/perl
-
-ENV DEBIAN_FRONTEND=noninteractive
-
-RUN perl -i.bak -pE '$x=$_; $x=~s|^deb |deb-src |g;$_.=$x' /etc/apt/sources.list \
-    && apt update \
-    && apt -yq full-upgrade \
-    && apt -yq build-dep perl \
-    &&     apt-get install -y --no-install-recommends \
-       bzip2 \
-       ca-certificates \
-       # cpio \
-       curl \
-       dpkg-dev \
-       # file \
-       gcc \
-       # g++ \
-       libbz2-dev \
-       libdb-dev \
-       libc6-dev \
-       libgdbm-dev \
-       liblzma-dev \
-       make \
-       netbase \
-       patch \
-       procps \
-       zlib1g-dev \
-       xz-utils \
-    && curl -SL https://www.cpan.org/src/5.0/perl-5.20.3.tar.bz2 -o perl-5.20.3.tar.bz2 \
-    && echo '1b40068166c242e34a536836286e70b78410602a80615143301e52aa2901493b *perl-5.20.3.tar.bz2' | sha256sum -c -
-RUN tar --strip-components=1 -xaf perl-5.20.3.tar.bz2 -C /usr/src/perl \
-    && rm perl-5.20.3.tar.bz2 \
-    && cat *.patch | patch -p1 \
-    && echo 'print "1..0 # Skipped: Tests are invalid"' > /usr/src/perl/ext/GDBM_File/t/fatal.t
-RUN gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)" \
-    && archBits="$(dpkg-architecture --query DEB_BUILD_ARCH_BITS)" \
-    && archFlag="$([ "$archBits" = '64' ] && echo '-Duse64bitall' || echo '-Duse64bitint')" \
-    && ./Configure -Darchname="$gnuArch" "$archFlag" -Accflags=-ggdb -DDEBUGGING -Duseshrplib -Dvendorprefix=/usr/local -Aldflags='-Wl,-z,now -Wl,-zrelro -Wl,-z,noexecstack' -Accflags='-fpie -fPIC -fstack-protector-all -pie -D_FORTIFY_SOURCE=2' -Duseshrplib  -des \
-    && make -j$(nproc) \
-    && TEST_JOBS=$(nproc) make test_harness
-RUN make install \
-    && cd /usr/src \
-    && curl -LO https://www.cpan.org/authors/id/M/MI/MIYAGAWA/App-cpanminus-1.7044.tar.gz \
-    && echo '9b60767fe40752ef7a9d3f13f19060a63389a5c23acc3e9827e19b75500f81f3 *App-cpanminus-1.7044.tar.gz' | sha256sum -c - \
-    && tar -xzf App-cpanminus-1.7044.tar.gz && cd App-cpanminus-1.7044 && perl bin/cpanm . && cd /root \
-    && savedPackages="make netbase" \
-    && apt-mark auto '.*' > /dev/null \
-    && apt-mark manual $savedPackages \
-    && apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false \
-    && rm -fr /var/cache/apt/* /var/lib/apt/lists/* \
-    && rm -fr ./cpanm /root/.cpanm /usr/src/perl /usr/src/App-cpanminus-1.7044* /tmp/*
-
-WORKDIR /
-
-CMD ["perl5.20.3","-de0"]

5.020.003-main,debugging-buster/fix-pack-longdouble.patch

@@ -1,41 +0,0 @@
-From a2db6c92fc2880ba1f288b6c4599a779997dd4e7 Mon Sep 17 00:00:00 2001
-From: Tony Cook <tony@develop-help.com>
-Date: Thu, 9 Apr 2015 15:45:16 +1000
-Subject: [PATCH] [perl #123971] fix long double pack padding on newer GCC
-
----
- pp_pack.c |   11 +++++++++++
- 1 file changed, 11 insertions(+)
-
-diff --git a/pp_pack.c b/pp_pack.c
-index 06adade..1d732a8 100644
---- a/pp_pack.c
-+++ b/pp_pack.c
-@@ -2709,6 +2709,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		anv.nv = sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(anv.bytes+10, sizeof(anv.bytes) - 10, U8);
-+#    endif
- #else
- 		anv.nv = SvNV(fromstr);
- #endif
-@@ -2726,6 +2732,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #  ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		aldouble.ld = (long double)sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(aldouble.bytes+10, sizeof(aldouble.bytes) - 10, U8);
-+#    endif
- #  else
- 		aldouble.ld = (long double)SvNV(fromstr);
- #  endif
--- 
-1.7.10.4
-
-

5.020.003-main,longdouble,threaded-bullseye/DevelPatchPerl.patch

@@ -1,281 +0,0 @@
-diff --git a/Configure b/Configure
-index 438b926..a762f78 100755
---- a/Configure
-+++ b/Configure
-@@ -4591,7 +4591,7 @@ else
- fi
- $rm -f try try.*
- case "$gccversion" in
--1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-+1.*) cpp=`./loc gcc-cpp $cpp $pth` ;;
- esac
- case "$gccversion" in
- '') gccosandvers='' ;;
-@@ -4631,7 +4631,7 @@ esac
- # gcc 3.* complain about adding -Idirectories that they already know about,
- # so we will take those off from locincpth.
- case "$gccversion" in
--3*)
-+3.*)
-     echo "main(){}">try.c
-     for incdir in $locincpth; do
-        warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
-@@ -5328,13 +5328,13 @@ fi
- case "$hint" in
- default|recommended)
- 	case "$gccversion" in
--	1*) dflt="$dflt -fpcc-struct-return" ;;
-+	1.*) dflt="$dflt -fpcc-struct-return" ;;
- 	esac
- 	case "$optimize:$DEBUGGING" in
- 	*-g*:old) dflt="$dflt -DDEBUGGING";;
- 	esac
- 	case "$gccversion" in
--	2*) if $test -d /etc/conf/kconfig.d &&
-+	2.*) if $test -d /etc/conf/kconfig.d &&
- 			$contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- 		then
- 			# Interactive Systems (ISC) POSIX mode.
-@@ -5343,7 +5343,7 @@ default|recommended)
- 		;;
- 	esac
- 	case "$gccversion" in
--	1*) ;;
-+	1.*) ;;
- 	2.[0-8]*) ;;
- 	?*)	set strict-aliasing -fno-strict-aliasing
- 		eval $checkccflag
-@@ -5445,7 +5445,7 @@ case "$cppflags" in
- *)  cppflags="$cppflags $ccflags" ;;
- esac
- case "$gccversion" in
--1*) cppflags="$cppflags -D__GNUC__"
-+1.*) cppflags="$cppflags -D__GNUC__"
- esac
- case "$mips_type" in
- '');;
-diff --git a/cpan/Time-Local/t/Local.t b/cpan/Time-Local/t/Local.t
-index 472e71a..0a852a0 100644
---- a/cpan/Time-Local/t/Local.t
-+++ b/cpan/Time-Local/t/Local.t
-@@ -91,7 +91,7 @@ for (@time, @neg_time) {
- 
-         # Test timelocal()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timelocal($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = localtime($time);
-@@ -107,7 +107,7 @@ for (@time, @neg_time) {
- 
-         # Test timegm()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timegm($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = gmtime($time);
-@@ -125,7 +125,6 @@ for (@time, @neg_time) {
- 
- for (@bad_time) {
-     my($year, $mon, $mday, $hour, $min, $sec) = @$_;
--    $year -= 1900;
-     $mon--;
- 
-     eval { timegm($sec,$min,$hour,$mday,$mon,$year) };
-@@ -134,14 +133,14 @@ for (@bad_time) {
- }
- 
- {
--    is(timelocal(0,0,1,1,0,90) - timelocal(0,0,0,1,0,90), 3600,
-+    is(timelocal(0,0,1,1,0,1990) - timelocal(0,0,0,1,0,1990), 3600,
-        'one hour difference between two calls to timelocal');
- 
--    is(timelocal(1,2,3,1,0,100) - timelocal(1,2,3,31,11,99), 24 * 3600,
-+    is(timelocal(1,2,3,1,0,2000) - timelocal(1,2,3,31,11,1999), 24 * 3600,
-        'one day difference between two calls to timelocal');
- 
-     # Diff beween Jan 1, 1980 and Mar 1, 1980 = (31 + 29 = 60 days)
--    is(timegm(0,0,0, 1, 2, 80) - timegm(0,0,0, 1, 0, 80), 60 * 24 * 3600,
-+    is(timegm(0,0,0, 1, 2, 1980) - timegm(0,0,0, 1, 0, 1980), 60 * 24 * 3600,
-        '60 day difference between two calls to timegm');
- }
- 
-diff --git a/hints/linux.sh b/hints/linux.sh
-index 956adfc..c749f0f 100644
---- a/hints/linux.sh
-+++ b/hints/linux.sh
-@@ -85,7 +85,7 @@ uname_minus_m="${uname_minus_m:-"$targetarch"}"
- 
- # Check if we're about to use Intel's ICC compiler
- case "`${cc:-cc} -V 2>&1`" in
--*"Intel(R) C++ Compiler"*|*"Intel(R) C Compiler"*)
-+*"Intel(R) C"*" Compiler"*)
-     # record the version, formats:
-     # icc (ICC) 10.1 20080801
-     # icpc (ICC) 10.1 20080801
-@@ -165,6 +165,9 @@ esac
- # plibpth to bypass this check.
- if [ -x /usr/bin/gcc ] ; then
-     gcc=/usr/bin/gcc
-+# clang also provides -print-search-dirs
-+elif ${cc:-cc} --version 2>/dev/null | grep -q '^clang ' ; then
-+    gcc=${cc:-cc}
- else
-     gcc=gcc
- fi
-@@ -178,6 +181,33 @@ case "$plibpth" in
-     ;;
- esac
- 
-+# For the musl libc, perl should #define _GNU_SOURCE.  Otherwise, some
-+# available functions, like memem, won't be used.  See the discussion in
-+# [perl #133760].  musl doesn't offer an easy way to identify it, but,
-+# at least on alpine linux, the ldd --version output contains the
-+# string 'musl.'
-+case `ldd --version 2>&1` in
-+    musl*)  ccflags="$ccflags -D_GNU_SOURCE" ;;
-+        *) ;;
-+esac
-+
-+# libquadmath is sometimes installed as gcc internal library,
-+# so contrary to our usual policy of *not* looking at gcc internal
-+# directories we now *do* look at them, in case they contain
-+# the quadmath library.
-+# XXX This may apply to other gcc internal libraries, if such exist.
-+# XXX This could be at Configure level, but then the $gcc is messy.
-+case "$usequadmath" in
-+"$define")
-+  for d in `LANG=C LC_ALL=C $gcc $ccflags $ldflags -print-search-dirs | grep libraries | cut -f2- -d= | tr ':' $trnl | grep 'gcc' | sed -e 's:/$::'`
-+  do
-+    case `ls $d/*libquadmath*$so* 2>/dev/null` in
-+    $d/*libquadmath*$so*) xlibpth="$xlibpth $d" ;;
-+    esac
-+  done
-+  ;;
-+esac
-+
- case "$libc" in
- '')
- # If you have glibc, then report the version for ./myconfig bug reporting.
-@@ -204,92 +234,6 @@ case "$libc" in
-     ;;
- esac
- 
--# Are we using ELF?  Thanks to Kenneth Albanowski <kjahds@kjahds.com>
--# for this test.
--cat >try.c <<'EOM'
--/* Test for whether ELF binaries are produced */
--#include <fcntl.h>
--#include <stdlib.h>
--#include <unistd.h>
--main() {
--	char buffer[4];
--	int i=open("a.out",O_RDONLY);
--	if(i==-1)
--		exit(1); /* fail */
--	if(read(i,&buffer[0],4)<4)
--		exit(1); /* fail */
--	if(buffer[0] != 127 || buffer[1] != 'E' ||
--           buffer[2] != 'L' || buffer[3] != 'F')
--		exit(1); /* fail */
--	exit(0); /* succeed (yes, it's ELF) */
--}
--EOM
--if ${cc:-gcc} $ccflags $ldflags try.c >/dev/null 2>&1 && $run ./a.out; then
--    cat <<'EOM' >&4
--
--You appear to have ELF support.  I'll try to use it for dynamic loading.
--If dynamic loading doesn't work, read hints/linux.sh for further information.
--EOM
--
--else
--    cat <<'EOM' >&4
--
--You don't have an ELF gcc.  I will use dld if possible.  If you are
--using a version of DLD earlier than 3.2.6, or don't have it at all, you
--should probably upgrade. If you are forced to use 3.2.4, you should
--uncomment a couple of lines in hints/linux.sh and restart Configure so
--that shared libraries will be disallowed.
--
--EOM
--    lddlflags="-r $lddlflags"
--    # These empty values are so that Configure doesn't put in the
--    # Linux ELF values.
--    ccdlflags=' '
--    cccdlflags=' '
--    ccflags="-DOVR_DBL_DIG=14 $ccflags"
--    so='sa'
--    dlext='o'
--    nm_so_opt=' '
--    ## If you are using DLD 3.2.4 which does not support shared libs,
--    ## uncomment the next two lines:
--    #ldflags="-static"
--    #so='none'
--
--	# In addition, on some systems there is a problem with perl and NDBM
--	# which causes AnyDBM and NDBM_File to lock up. This is evidenced
--	# in the tests as AnyDBM just freezing.  Apparently, this only
--	# happens on a.out systems, so we disable NDBM for all a.out linux
--	# systems.  If someone can suggest a more robust test
--	#  that would be appreciated.
--	#
--	# More info:
--	# Date: Wed, 7 Feb 1996 03:21:04 +0900
--	# From: Jeffrey Friedl <jfriedl@nff.ncl.omron.co.jp>
--	#
--	# I tried compiling with DBM support and sure enough things locked up
--	# just as advertised. Checking into it, I found that the lockup was
--	# during the call to dbm_open. Not *in* dbm_open -- but between the call
--	# to and the jump into.
--	#
--	# To make a long story short, making sure that the *.a and *.sa pairs of
--	#   /usr/lib/lib{m,db,gdbm}.{a,sa}
--	# were perfectly in sync took care of it.
--	#
--	# This will generate a harmless Whoa There! message
--	case "$d_dbm_open" in
--	'')	cat <<'EOM' >&4
--
--Disabling ndbm.  This will generate a Whoa There message in Configure.
--Read hints/linux.sh for further information.
--EOM
--		# You can override this with Configure -Dd_dbm_open
--		d_dbm_open=undef
--		;;
--	esac
--fi
--
--rm -f try.c a.out
--
- if ${sh:-/bin/sh} -c exit; then
-   echo ''
-   echo 'You appear to have a working bash.  Good.'
-@@ -497,7 +441,7 @@ then
-        DBLIB="$DBDIR/libdb.so"
-        if [ -f $DBLIB ]
-        then
--         if ${nm:-nm} -u $DBLIB | grep pthread >/dev/null
-+         if ${nm:-nm} -u $DBLIB 2>/dev/null | grep pthread >/dev/null
-          then
-            if ldd $DBLIB | grep pthread >/dev/null
-            then
-diff --git a/pp.c b/pp.c
-index 4ec6887..729239c 100644
---- a/pp.c
-+++ b/pp.c
-@@ -3435,8 +3435,12 @@ PP(pp_crypt)
- #if defined(__GLIBC__) || defined(__EMX__)
- 	if (PL_reentrant_buffer->_crypt_struct_buffer) {
- 	    PL_reentrant_buffer->_crypt_struct_buffer->initialized = 0;
--	    /* work around glibc-2.2.5 bug */
-+#if (defined(__GLIBC__) && __GLIBC__ == 2) && \
-+    (defined(__GLIBC_MINOR__) && __GLIBC_MINOR__ >= 2 && __GLIBC_MINOR__ < 4)
-+	    /* work around glibc-2.2.5 bug, has been fixed at some
-+	     * time in glibc-2.3.X */
- 	    PL_reentrant_buffer->_crypt_struct_buffer->current_saltbits = 0;
-+#endif
- 	}
- #endif
-     }

5.020.003-main,longdouble,threaded-bullseye/Dockerfile

@@ -1,59 +0,0 @@
-FROM debian:bullseye-backports
-LABEL maintainer="Ryan Voots <simcop@cpan.org>"
-
-COPY *.patch /usr/src/perl/
-WORKDIR /usr/src/perl
-
-ENV DEBIAN_FRONTEND=noninteractive
-
-RUN perl -i.bak -pE '$x=$_; $x=~s|^deb |deb-src |g;$_.=$x' /etc/apt/sources.list \
-    && apt update \
-    && apt -yq full-upgrade \
-    && apt -yq build-dep perl \
-    &&     apt-get install -y --no-install-recommends \
-       bzip2 \
-       ca-certificates \
-       # cpio \
-       curl \
-       dpkg-dev \
-       # file \
-       gcc \
-       # g++ \
-       libbz2-dev \
-       libdb-dev \
-       libc6-dev \
-       libgdbm-dev \
-       liblzma-dev \
-       make \
-       netbase \
-       patch \
-       procps \
-       zlib1g-dev \
-       xz-utils \
-    && curl -SL https://www.cpan.org/src/5.0/perl-5.20.3.tar.bz2 -o perl-5.20.3.tar.bz2 \
-    && echo '1b40068166c242e34a536836286e70b78410602a80615143301e52aa2901493b *perl-5.20.3.tar.bz2' | sha256sum -c -
-RUN tar --strip-components=1 -xaf perl-5.20.3.tar.bz2 -C /usr/src/perl \
-    && rm perl-5.20.3.tar.bz2 \
-    && cat *.patch | patch -p1 \
-    && echo 'print "1..0 # Skipped: Tests are invalid"' > /usr/src/perl/ext/GDBM_File/t/fatal.t
-RUN gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)" \
-    && archBits="$(dpkg-architecture --query DEB_BUILD_ARCH_BITS)" \
-    && archFlag="$([ "$archBits" = '64' ] && echo '-Duse64bitall' || echo '-Duse64bitint')" \
-    && ./Configure -Darchname="$gnuArch" "$archFlag" -Duselongdouble -Dusethreads -Duseshrplib -Dvendorprefix=/usr/local -Aldflags='-Wl,-z,now -Wl,-zrelro -Wl,-z,noexecstack' -Accflags='-fpie -fPIC -fstack-protector-all -pie -D_FORTIFY_SOURCE=2' -Duseshrplib  -des \
-    && make -j$(nproc) \
-    && TEST_JOBS=$(nproc) make test_harness
-RUN make install \
-    && cd /usr/src \
-    && curl -LO https://www.cpan.org/authors/id/M/MI/MIYAGAWA/App-cpanminus-1.7044.tar.gz \
-    && echo '9b60767fe40752ef7a9d3f13f19060a63389a5c23acc3e9827e19b75500f81f3 *App-cpanminus-1.7044.tar.gz' | sha256sum -c - \
-    && tar -xzf App-cpanminus-1.7044.tar.gz && cd App-cpanminus-1.7044 && perl bin/cpanm . && cd /root \
-    && savedPackages="make netbase" \
-    && apt-mark auto '.*' > /dev/null \
-    && apt-mark manual $savedPackages \
-    && apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false \
-    && rm -fr /var/cache/apt/* /var/lib/apt/lists/* \
-    && rm -fr ./cpanm /root/.cpanm /usr/src/perl /usr/src/App-cpanminus-1.7044* /tmp/*
-
-WORKDIR /
-
-CMD ["perl5.20.3","-de0"]

5.020.003-main,longdouble,threaded-bullseye/fix-pack-longdouble.patch

@@ -1,41 +0,0 @@
-From a2db6c92fc2880ba1f288b6c4599a779997dd4e7 Mon Sep 17 00:00:00 2001
-From: Tony Cook <tony@develop-help.com>
-Date: Thu, 9 Apr 2015 15:45:16 +1000
-Subject: [PATCH] [perl #123971] fix long double pack padding on newer GCC
-
----
- pp_pack.c |   11 +++++++++++
- 1 file changed, 11 insertions(+)
-
-diff --git a/pp_pack.c b/pp_pack.c
-index 06adade..1d732a8 100644
---- a/pp_pack.c
-+++ b/pp_pack.c
-@@ -2709,6 +2709,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		anv.nv = sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(anv.bytes+10, sizeof(anv.bytes) - 10, U8);
-+#    endif
- #else
- 		anv.nv = SvNV(fromstr);
- #endif
-@@ -2726,6 +2732,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #  ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		aldouble.ld = (long double)sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(aldouble.bytes+10, sizeof(aldouble.bytes) - 10, U8);
-+#    endif
- #  else
- 		aldouble.ld = (long double)SvNV(fromstr);
- #  endif
--- 
-1.7.10.4
-
-

5.020.003-main,longdouble,threaded-buster/DevelPatchPerl.patch

@@ -1,281 +0,0 @@
-diff --git a/Configure b/Configure
-index 438b926..a762f78 100755
---- a/Configure
-+++ b/Configure
-@@ -4591,7 +4591,7 @@ else
- fi
- $rm -f try try.*
- case "$gccversion" in
--1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-+1.*) cpp=`./loc gcc-cpp $cpp $pth` ;;
- esac
- case "$gccversion" in
- '') gccosandvers='' ;;
-@@ -4631,7 +4631,7 @@ esac
- # gcc 3.* complain about adding -Idirectories that they already know about,
- # so we will take those off from locincpth.
- case "$gccversion" in
--3*)
-+3.*)
-     echo "main(){}">try.c
-     for incdir in $locincpth; do
-        warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
-@@ -5328,13 +5328,13 @@ fi
- case "$hint" in
- default|recommended)
- 	case "$gccversion" in
--	1*) dflt="$dflt -fpcc-struct-return" ;;
-+	1.*) dflt="$dflt -fpcc-struct-return" ;;
- 	esac
- 	case "$optimize:$DEBUGGING" in
- 	*-g*:old) dflt="$dflt -DDEBUGGING";;
- 	esac
- 	case "$gccversion" in
--	2*) if $test -d /etc/conf/kconfig.d &&
-+	2.*) if $test -d /etc/conf/kconfig.d &&
- 			$contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- 		then
- 			# Interactive Systems (ISC) POSIX mode.
-@@ -5343,7 +5343,7 @@ default|recommended)
- 		;;
- 	esac
- 	case "$gccversion" in
--	1*) ;;
-+	1.*) ;;
- 	2.[0-8]*) ;;
- 	?*)	set strict-aliasing -fno-strict-aliasing
- 		eval $checkccflag
-@@ -5445,7 +5445,7 @@ case "$cppflags" in
- *)  cppflags="$cppflags $ccflags" ;;
- esac
- case "$gccversion" in
--1*) cppflags="$cppflags -D__GNUC__"
-+1.*) cppflags="$cppflags -D__GNUC__"
- esac
- case "$mips_type" in
- '');;
-diff --git a/cpan/Time-Local/t/Local.t b/cpan/Time-Local/t/Local.t
-index 472e71a..0a852a0 100644
---- a/cpan/Time-Local/t/Local.t
-+++ b/cpan/Time-Local/t/Local.t
-@@ -91,7 +91,7 @@ for (@time, @neg_time) {
- 
-         # Test timelocal()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timelocal($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = localtime($time);
-@@ -107,7 +107,7 @@ for (@time, @neg_time) {
- 
-         # Test timegm()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timegm($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = gmtime($time);
-@@ -125,7 +125,6 @@ for (@time, @neg_time) {
- 
- for (@bad_time) {
-     my($year, $mon, $mday, $hour, $min, $sec) = @$_;
--    $year -= 1900;
-     $mon--;
- 
-     eval { timegm($sec,$min,$hour,$mday,$mon,$year) };
-@@ -134,14 +133,14 @@ for (@bad_time) {
- }
- 
- {
--    is(timelocal(0,0,1,1,0,90) - timelocal(0,0,0,1,0,90), 3600,
-+    is(timelocal(0,0,1,1,0,1990) - timelocal(0,0,0,1,0,1990), 3600,
-        'one hour difference between two calls to timelocal');
- 
--    is(timelocal(1,2,3,1,0,100) - timelocal(1,2,3,31,11,99), 24 * 3600,
-+    is(timelocal(1,2,3,1,0,2000) - timelocal(1,2,3,31,11,1999), 24 * 3600,
-        'one day difference between two calls to timelocal');
- 
-     # Diff beween Jan 1, 1980 and Mar 1, 1980 = (31 + 29 = 60 days)
--    is(timegm(0,0,0, 1, 2, 80) - timegm(0,0,0, 1, 0, 80), 60 * 24 * 3600,
-+    is(timegm(0,0,0, 1, 2, 1980) - timegm(0,0,0, 1, 0, 1980), 60 * 24 * 3600,
-        '60 day difference between two calls to timegm');
- }
- 
-diff --git a/hints/linux.sh b/hints/linux.sh
-index 956adfc..c749f0f 100644
---- a/hints/linux.sh
-+++ b/hints/linux.sh
-@@ -85,7 +85,7 @@ uname_minus_m="${uname_minus_m:-"$targetarch"}"
- 
- # Check if we're about to use Intel's ICC compiler
- case "`${cc:-cc} -V 2>&1`" in
--*"Intel(R) C++ Compiler"*|*"Intel(R) C Compiler"*)
-+*"Intel(R) C"*" Compiler"*)
-     # record the version, formats:
-     # icc (ICC) 10.1 20080801
-     # icpc (ICC) 10.1 20080801
-@@ -165,6 +165,9 @@ esac
- # plibpth to bypass this check.
- if [ -x /usr/bin/gcc ] ; then
-     gcc=/usr/bin/gcc
-+# clang also provides -print-search-dirs
-+elif ${cc:-cc} --version 2>/dev/null | grep -q '^clang ' ; then
-+    gcc=${cc:-cc}
- else
-     gcc=gcc
- fi
-@@ -178,6 +181,33 @@ case "$plibpth" in
-     ;;
- esac
- 
-+# For the musl libc, perl should #define _GNU_SOURCE.  Otherwise, some
-+# available functions, like memem, won't be used.  See the discussion in
-+# [perl #133760].  musl doesn't offer an easy way to identify it, but,
-+# at least on alpine linux, the ldd --version output contains the
-+# string 'musl.'
-+case `ldd --version 2>&1` in
-+    musl*)  ccflags="$ccflags -D_GNU_SOURCE" ;;
-+        *) ;;
-+esac
-+
-+# libquadmath is sometimes installed as gcc internal library,
-+# so contrary to our usual policy of *not* looking at gcc internal
-+# directories we now *do* look at them, in case they contain
-+# the quadmath library.
-+# XXX This may apply to other gcc internal libraries, if such exist.
-+# XXX This could be at Configure level, but then the $gcc is messy.
-+case "$usequadmath" in
-+"$define")
-+  for d in `LANG=C LC_ALL=C $gcc $ccflags $ldflags -print-search-dirs | grep libraries | cut -f2- -d= | tr ':' $trnl | grep 'gcc' | sed -e 's:/$::'`
-+  do
-+    case `ls $d/*libquadmath*$so* 2>/dev/null` in
-+    $d/*libquadmath*$so*) xlibpth="$xlibpth $d" ;;
-+    esac
-+  done
-+  ;;
-+esac
-+
- case "$libc" in
- '')
- # If you have glibc, then report the version for ./myconfig bug reporting.
-@@ -204,92 +234,6 @@ case "$libc" in
-     ;;
- esac
- 
--# Are we using ELF?  Thanks to Kenneth Albanowski <kjahds@kjahds.com>
--# for this test.
--cat >try.c <<'EOM'
--/* Test for whether ELF binaries are produced */
--#include <fcntl.h>
--#include <stdlib.h>
--#include <unistd.h>
--main() {
--	char buffer[4];
--	int i=open("a.out",O_RDONLY);
--	if(i==-1)
--		exit(1); /* fail */
--	if(read(i,&buffer[0],4)<4)
--		exit(1); /* fail */
--	if(buffer[0] != 127 || buffer[1] != 'E' ||
--           buffer[2] != 'L' || buffer[3] != 'F')
--		exit(1); /* fail */
--	exit(0); /* succeed (yes, it's ELF) */
--}
--EOM
--if ${cc:-gcc} $ccflags $ldflags try.c >/dev/null 2>&1 && $run ./a.out; then
--    cat <<'EOM' >&4
--
--You appear to have ELF support.  I'll try to use it for dynamic loading.
--If dynamic loading doesn't work, read hints/linux.sh for further information.
--EOM
--
--else
--    cat <<'EOM' >&4
--
--You don't have an ELF gcc.  I will use dld if possible.  If you are
--using a version of DLD earlier than 3.2.6, or don't have it at all, you
--should probably upgrade. If you are forced to use 3.2.4, you should
--uncomment a couple of lines in hints/linux.sh and restart Configure so
--that shared libraries will be disallowed.
--
--EOM
--    lddlflags="-r $lddlflags"
--    # These empty values are so that Configure doesn't put in the
--    # Linux ELF values.
--    ccdlflags=' '
--    cccdlflags=' '
--    ccflags="-DOVR_DBL_DIG=14 $ccflags"
--    so='sa'
--    dlext='o'
--    nm_so_opt=' '
--    ## If you are using DLD 3.2.4 which does not support shared libs,
--    ## uncomment the next two lines:
--    #ldflags="-static"
--    #so='none'
--
--	# In addition, on some systems there is a problem with perl and NDBM
--	# which causes AnyDBM and NDBM_File to lock up. This is evidenced
--	# in the tests as AnyDBM just freezing.  Apparently, this only
--	# happens on a.out systems, so we disable NDBM for all a.out linux
--	# systems.  If someone can suggest a more robust test
--	#  that would be appreciated.
--	#
--	# More info:
--	# Date: Wed, 7 Feb 1996 03:21:04 +0900
--	# From: Jeffrey Friedl <jfriedl@nff.ncl.omron.co.jp>
--	#
--	# I tried compiling with DBM support and sure enough things locked up
--	# just as advertised. Checking into it, I found that the lockup was
--	# during the call to dbm_open. Not *in* dbm_open -- but between the call
--	# to and the jump into.
--	#
--	# To make a long story short, making sure that the *.a and *.sa pairs of
--	#   /usr/lib/lib{m,db,gdbm}.{a,sa}
--	# were perfectly in sync took care of it.
--	#
--	# This will generate a harmless Whoa There! message
--	case "$d_dbm_open" in
--	'')	cat <<'EOM' >&4
--
--Disabling ndbm.  This will generate a Whoa There message in Configure.
--Read hints/linux.sh for further information.
--EOM
--		# You can override this with Configure -Dd_dbm_open
--		d_dbm_open=undef
--		;;
--	esac
--fi
--
--rm -f try.c a.out
--
- if ${sh:-/bin/sh} -c exit; then
-   echo ''
-   echo 'You appear to have a working bash.  Good.'
-@@ -497,7 +441,7 @@ then
-        DBLIB="$DBDIR/libdb.so"
-        if [ -f $DBLIB ]
-        then
--         if ${nm:-nm} -u $DBLIB | grep pthread >/dev/null
-+         if ${nm:-nm} -u $DBLIB 2>/dev/null | grep pthread >/dev/null
-          then
-            if ldd $DBLIB | grep pthread >/dev/null
-            then
-diff --git a/pp.c b/pp.c
-index 4ec6887..729239c 100644
---- a/pp.c
-+++ b/pp.c
-@@ -3435,8 +3435,12 @@ PP(pp_crypt)
- #if defined(__GLIBC__) || defined(__EMX__)
- 	if (PL_reentrant_buffer->_crypt_struct_buffer) {
- 	    PL_reentrant_buffer->_crypt_struct_buffer->initialized = 0;
--	    /* work around glibc-2.2.5 bug */
-+#if (defined(__GLIBC__) && __GLIBC__ == 2) && \
-+    (defined(__GLIBC_MINOR__) && __GLIBC_MINOR__ >= 2 && __GLIBC_MINOR__ < 4)
-+	    /* work around glibc-2.2.5 bug, has been fixed at some
-+	     * time in glibc-2.3.X */
- 	    PL_reentrant_buffer->_crypt_struct_buffer->current_saltbits = 0;
-+#endif
- 	}
- #endif
-     }

5.020.003-main,longdouble,threaded-buster/Dockerfile

@@ -1,59 +0,0 @@
-FROM debian:buster-backports
-LABEL maintainer="Ryan Voots <simcop@cpan.org>"
-
-COPY *.patch /usr/src/perl/
-WORKDIR /usr/src/perl
-
-ENV DEBIAN_FRONTEND=noninteractive
-
-RUN perl -i.bak -pE '$x=$_; $x=~s|^deb |deb-src |g;$_.=$x' /etc/apt/sources.list \
-    && apt update \
-    && apt -yq full-upgrade \
-    && apt -yq build-dep perl \
-    &&     apt-get install -y --no-install-recommends \
-       bzip2 \
-       ca-certificates \
-       # cpio \
-       curl \
-       dpkg-dev \
-       # file \
-       gcc \
-       # g++ \
-       libbz2-dev \
-       libdb-dev \
-       libc6-dev \
-       libgdbm-dev \
-       liblzma-dev \
-       make \
-       netbase \
-       patch \
-       procps \
-       zlib1g-dev \
-       xz-utils \
-    && curl -SL https://www.cpan.org/src/5.0/perl-5.20.3.tar.bz2 -o perl-5.20.3.tar.bz2 \
-    && echo '1b40068166c242e34a536836286e70b78410602a80615143301e52aa2901493b *perl-5.20.3.tar.bz2' | sha256sum -c -
-RUN tar --strip-components=1 -xaf perl-5.20.3.tar.bz2 -C /usr/src/perl \
-    && rm perl-5.20.3.tar.bz2 \
-    && cat *.patch | patch -p1 \
-    && echo 'print "1..0 # Skipped: Tests are invalid"' > /usr/src/perl/ext/GDBM_File/t/fatal.t
-RUN gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)" \
-    && archBits="$(dpkg-architecture --query DEB_BUILD_ARCH_BITS)" \
-    && archFlag="$([ "$archBits" = '64' ] && echo '-Duse64bitall' || echo '-Duse64bitint')" \
-    && ./Configure -Darchname="$gnuArch" "$archFlag" -Duselongdouble -Dusethreads -Duseshrplib -Dvendorprefix=/usr/local -Aldflags='-Wl,-z,now -Wl,-zrelro -Wl,-z,noexecstack' -Accflags='-fpie -fPIC -fstack-protector-all -pie -D_FORTIFY_SOURCE=2' -Duseshrplib  -des \
-    && make -j$(nproc) \
-    && TEST_JOBS=$(nproc) make test_harness
-RUN make install \
-    && cd /usr/src \
-    && curl -LO https://www.cpan.org/authors/id/M/MI/MIYAGAWA/App-cpanminus-1.7044.tar.gz \
-    && echo '9b60767fe40752ef7a9d3f13f19060a63389a5c23acc3e9827e19b75500f81f3 *App-cpanminus-1.7044.tar.gz' | sha256sum -c - \
-    && tar -xzf App-cpanminus-1.7044.tar.gz && cd App-cpanminus-1.7044 && perl bin/cpanm . && cd /root \
-    && savedPackages="make netbase" \
-    && apt-mark auto '.*' > /dev/null \
-    && apt-mark manual $savedPackages \
-    && apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false \
-    && rm -fr /var/cache/apt/* /var/lib/apt/lists/* \
-    && rm -fr ./cpanm /root/.cpanm /usr/src/perl /usr/src/App-cpanminus-1.7044* /tmp/*
-
-WORKDIR /
-
-CMD ["perl5.20.3","-de0"]

5.020.003-main,longdouble,threaded-buster/fix-pack-longdouble.patch

@@ -1,41 +0,0 @@
-From a2db6c92fc2880ba1f288b6c4599a779997dd4e7 Mon Sep 17 00:00:00 2001
-From: Tony Cook <tony@develop-help.com>
-Date: Thu, 9 Apr 2015 15:45:16 +1000
-Subject: [PATCH] [perl #123971] fix long double pack padding on newer GCC
-
----
- pp_pack.c |   11 +++++++++++
- 1 file changed, 11 insertions(+)
-
-diff --git a/pp_pack.c b/pp_pack.c
-index 06adade..1d732a8 100644
---- a/pp_pack.c
-+++ b/pp_pack.c
-@@ -2709,6 +2709,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		anv.nv = sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(anv.bytes+10, sizeof(anv.bytes) - 10, U8);
-+#    endif
- #else
- 		anv.nv = SvNV(fromstr);
- #endif
-@@ -2726,6 +2732,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #  ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		aldouble.ld = (long double)sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(aldouble.bytes+10, sizeof(aldouble.bytes) - 10, U8);
-+#    endif
- #  else
- 		aldouble.ld = (long double)SvNV(fromstr);
- #  endif
--- 
-1.7.10.4
-
-

5.020.003-main,longdouble-bullseye/DevelPatchPerl.patch

@@ -1,281 +0,0 @@
-diff --git a/Configure b/Configure
-index 438b926..a762f78 100755
---- a/Configure
-+++ b/Configure
-@@ -4591,7 +4591,7 @@ else
- fi
- $rm -f try try.*
- case "$gccversion" in
--1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-+1.*) cpp=`./loc gcc-cpp $cpp $pth` ;;
- esac
- case "$gccversion" in
- '') gccosandvers='' ;;
-@@ -4631,7 +4631,7 @@ esac
- # gcc 3.* complain about adding -Idirectories that they already know about,
- # so we will take those off from locincpth.
- case "$gccversion" in
--3*)
-+3.*)
-     echo "main(){}">try.c
-     for incdir in $locincpth; do
-        warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
-@@ -5328,13 +5328,13 @@ fi
- case "$hint" in
- default|recommended)
- 	case "$gccversion" in
--	1*) dflt="$dflt -fpcc-struct-return" ;;
-+	1.*) dflt="$dflt -fpcc-struct-return" ;;
- 	esac
- 	case "$optimize:$DEBUGGING" in
- 	*-g*:old) dflt="$dflt -DDEBUGGING";;
- 	esac
- 	case "$gccversion" in
--	2*) if $test -d /etc/conf/kconfig.d &&
-+	2.*) if $test -d /etc/conf/kconfig.d &&
- 			$contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- 		then
- 			# Interactive Systems (ISC) POSIX mode.
-@@ -5343,7 +5343,7 @@ default|recommended)
- 		;;
- 	esac
- 	case "$gccversion" in
--	1*) ;;
-+	1.*) ;;
- 	2.[0-8]*) ;;
- 	?*)	set strict-aliasing -fno-strict-aliasing
- 		eval $checkccflag
-@@ -5445,7 +5445,7 @@ case "$cppflags" in
- *)  cppflags="$cppflags $ccflags" ;;
- esac
- case "$gccversion" in
--1*) cppflags="$cppflags -D__GNUC__"
-+1.*) cppflags="$cppflags -D__GNUC__"
- esac
- case "$mips_type" in
- '');;
-diff --git a/cpan/Time-Local/t/Local.t b/cpan/Time-Local/t/Local.t
-index 472e71a..0a852a0 100644
---- a/cpan/Time-Local/t/Local.t
-+++ b/cpan/Time-Local/t/Local.t
-@@ -91,7 +91,7 @@ for (@time, @neg_time) {
- 
-         # Test timelocal()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timelocal($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = localtime($time);
-@@ -107,7 +107,7 @@ for (@time, @neg_time) {
- 
-         # Test timegm()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timegm($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = gmtime($time);
-@@ -125,7 +125,6 @@ for (@time, @neg_time) {
- 
- for (@bad_time) {
-     my($year, $mon, $mday, $hour, $min, $sec) = @$_;
--    $year -= 1900;
-     $mon--;
- 
-     eval { timegm($sec,$min,$hour,$mday,$mon,$year) };
-@@ -134,14 +133,14 @@ for (@bad_time) {
- }
- 
- {
--    is(timelocal(0,0,1,1,0,90) - timelocal(0,0,0,1,0,90), 3600,
-+    is(timelocal(0,0,1,1,0,1990) - timelocal(0,0,0,1,0,1990), 3600,
-        'one hour difference between two calls to timelocal');
- 
--    is(timelocal(1,2,3,1,0,100) - timelocal(1,2,3,31,11,99), 24 * 3600,
-+    is(timelocal(1,2,3,1,0,2000) - timelocal(1,2,3,31,11,1999), 24 * 3600,
-        'one day difference between two calls to timelocal');
- 
-     # Diff beween Jan 1, 1980 and Mar 1, 1980 = (31 + 29 = 60 days)
--    is(timegm(0,0,0, 1, 2, 80) - timegm(0,0,0, 1, 0, 80), 60 * 24 * 3600,
-+    is(timegm(0,0,0, 1, 2, 1980) - timegm(0,0,0, 1, 0, 1980), 60 * 24 * 3600,
-        '60 day difference between two calls to timegm');
- }
- 
-diff --git a/hints/linux.sh b/hints/linux.sh
-index 956adfc..c749f0f 100644
---- a/hints/linux.sh
-+++ b/hints/linux.sh
-@@ -85,7 +85,7 @@ uname_minus_m="${uname_minus_m:-"$targetarch"}"
- 
- # Check if we're about to use Intel's ICC compiler
- case "`${cc:-cc} -V 2>&1`" in
--*"Intel(R) C++ Compiler"*|*"Intel(R) C Compiler"*)
-+*"Intel(R) C"*" Compiler"*)
-     # record the version, formats:
-     # icc (ICC) 10.1 20080801
-     # icpc (ICC) 10.1 20080801
-@@ -165,6 +165,9 @@ esac
- # plibpth to bypass this check.
- if [ -x /usr/bin/gcc ] ; then
-     gcc=/usr/bin/gcc
-+# clang also provides -print-search-dirs
-+elif ${cc:-cc} --version 2>/dev/null | grep -q '^clang ' ; then
-+    gcc=${cc:-cc}
- else
-     gcc=gcc
- fi
-@@ -178,6 +181,33 @@ case "$plibpth" in
-     ;;
- esac
- 
-+# For the musl libc, perl should #define _GNU_SOURCE.  Otherwise, some
-+# available functions, like memem, won't be used.  See the discussion in
-+# [perl #133760].  musl doesn't offer an easy way to identify it, but,
-+# at least on alpine linux, the ldd --version output contains the
-+# string 'musl.'
-+case `ldd --version 2>&1` in
-+    musl*)  ccflags="$ccflags -D_GNU_SOURCE" ;;
-+        *) ;;
-+esac
-+
-+# libquadmath is sometimes installed as gcc internal library,
-+# so contrary to our usual policy of *not* looking at gcc internal
-+# directories we now *do* look at them, in case they contain
-+# the quadmath library.
-+# XXX This may apply to other gcc internal libraries, if such exist.
-+# XXX This could be at Configure level, but then the $gcc is messy.
-+case "$usequadmath" in
-+"$define")
-+  for d in `LANG=C LC_ALL=C $gcc $ccflags $ldflags -print-search-dirs | grep libraries | cut -f2- -d= | tr ':' $trnl | grep 'gcc' | sed -e 's:/$::'`
-+  do
-+    case `ls $d/*libquadmath*$so* 2>/dev/null` in
-+    $d/*libquadmath*$so*) xlibpth="$xlibpth $d" ;;
-+    esac
-+  done
-+  ;;
-+esac
-+
- case "$libc" in
- '')
- # If you have glibc, then report the version for ./myconfig bug reporting.
-@@ -204,92 +234,6 @@ case "$libc" in
-     ;;
- esac
- 
--# Are we using ELF?  Thanks to Kenneth Albanowski <kjahds@kjahds.com>
--# for this test.
--cat >try.c <<'EOM'
--/* Test for whether ELF binaries are produced */
--#include <fcntl.h>
--#include <stdlib.h>
--#include <unistd.h>
--main() {
--	char buffer[4];
--	int i=open("a.out",O_RDONLY);
--	if(i==-1)
--		exit(1); /* fail */
--	if(read(i,&buffer[0],4)<4)
--		exit(1); /* fail */
--	if(buffer[0] != 127 || buffer[1] != 'E' ||
--           buffer[2] != 'L' || buffer[3] != 'F')
--		exit(1); /* fail */
--	exit(0); /* succeed (yes, it's ELF) */
--}
--EOM
--if ${cc:-gcc} $ccflags $ldflags try.c >/dev/null 2>&1 && $run ./a.out; then
--    cat <<'EOM' >&4
--
--You appear to have ELF support.  I'll try to use it for dynamic loading.
--If dynamic loading doesn't work, read hints/linux.sh for further information.
--EOM
--
--else
--    cat <<'EOM' >&4
--
--You don't have an ELF gcc.  I will use dld if possible.  If you are
--using a version of DLD earlier than 3.2.6, or don't have it at all, you
--should probably upgrade. If you are forced to use 3.2.4, you should
--uncomment a couple of lines in hints/linux.sh and restart Configure so
--that shared libraries will be disallowed.
--
--EOM
--    lddlflags="-r $lddlflags"
--    # These empty values are so that Configure doesn't put in the
--    # Linux ELF values.
--    ccdlflags=' '
--    cccdlflags=' '
--    ccflags="-DOVR_DBL_DIG=14 $ccflags"
--    so='sa'
--    dlext='o'
--    nm_so_opt=' '
--    ## If you are using DLD 3.2.4 which does not support shared libs,
--    ## uncomment the next two lines:
--    #ldflags="-static"
--    #so='none'
--
--	# In addition, on some systems there is a problem with perl and NDBM
--	# which causes AnyDBM and NDBM_File to lock up. This is evidenced
--	# in the tests as AnyDBM just freezing.  Apparently, this only
--	# happens on a.out systems, so we disable NDBM for all a.out linux
--	# systems.  If someone can suggest a more robust test
--	#  that would be appreciated.
--	#
--	# More info:
--	# Date: Wed, 7 Feb 1996 03:21:04 +0900
--	# From: Jeffrey Friedl <jfriedl@nff.ncl.omron.co.jp>
--	#
--	# I tried compiling with DBM support and sure enough things locked up
--	# just as advertised. Checking into it, I found that the lockup was
--	# during the call to dbm_open. Not *in* dbm_open -- but between the call
--	# to and the jump into.
--	#
--	# To make a long story short, making sure that the *.a and *.sa pairs of
--	#   /usr/lib/lib{m,db,gdbm}.{a,sa}
--	# were perfectly in sync took care of it.
--	#
--	# This will generate a harmless Whoa There! message
--	case "$d_dbm_open" in
--	'')	cat <<'EOM' >&4
--
--Disabling ndbm.  This will generate a Whoa There message in Configure.
--Read hints/linux.sh for further information.
--EOM
--		# You can override this with Configure -Dd_dbm_open
--		d_dbm_open=undef
--		;;
--	esac
--fi
--
--rm -f try.c a.out
--
- if ${sh:-/bin/sh} -c exit; then
-   echo ''
-   echo 'You appear to have a working bash.  Good.'
-@@ -497,7 +441,7 @@ then
-        DBLIB="$DBDIR/libdb.so"
-        if [ -f $DBLIB ]
-        then
--         if ${nm:-nm} -u $DBLIB | grep pthread >/dev/null
-+         if ${nm:-nm} -u $DBLIB 2>/dev/null | grep pthread >/dev/null
-          then
-            if ldd $DBLIB | grep pthread >/dev/null
-            then
-diff --git a/pp.c b/pp.c
-index 4ec6887..729239c 100644
---- a/pp.c
-+++ b/pp.c
-@@ -3435,8 +3435,12 @@ PP(pp_crypt)
- #if defined(__GLIBC__) || defined(__EMX__)
- 	if (PL_reentrant_buffer->_crypt_struct_buffer) {
- 	    PL_reentrant_buffer->_crypt_struct_buffer->initialized = 0;
--	    /* work around glibc-2.2.5 bug */
-+#if (defined(__GLIBC__) && __GLIBC__ == 2) && \
-+    (defined(__GLIBC_MINOR__) && __GLIBC_MINOR__ >= 2 && __GLIBC_MINOR__ < 4)
-+	    /* work around glibc-2.2.5 bug, has been fixed at some
-+	     * time in glibc-2.3.X */
- 	    PL_reentrant_buffer->_crypt_struct_buffer->current_saltbits = 0;
-+#endif
- 	}
- #endif
-     }

5.020.003-main,longdouble-bullseye/Dockerfile

@@ -1,59 +0,0 @@
-FROM debian:bullseye-backports
-LABEL maintainer="Ryan Voots <simcop@cpan.org>"
-
-COPY *.patch /usr/src/perl/
-WORKDIR /usr/src/perl
-
-ENV DEBIAN_FRONTEND=noninteractive
-
-RUN perl -i.bak -pE '$x=$_; $x=~s|^deb |deb-src |g;$_.=$x' /etc/apt/sources.list \
-    && apt update \
-    && apt -yq full-upgrade \
-    && apt -yq build-dep perl \
-    &&     apt-get install -y --no-install-recommends \
-       bzip2 \
-       ca-certificates \
-       # cpio \
-       curl \
-       dpkg-dev \
-       # file \
-       gcc \
-       # g++ \
-       libbz2-dev \
-       libdb-dev \
-       libc6-dev \
-       libgdbm-dev \
-       liblzma-dev \
-       make \
-       netbase \
-       patch \
-       procps \
-       zlib1g-dev \
-       xz-utils \
-    && curl -SL https://www.cpan.org/src/5.0/perl-5.20.3.tar.bz2 -o perl-5.20.3.tar.bz2 \
-    && echo '1b40068166c242e34a536836286e70b78410602a80615143301e52aa2901493b *perl-5.20.3.tar.bz2' | sha256sum -c -
-RUN tar --strip-components=1 -xaf perl-5.20.3.tar.bz2 -C /usr/src/perl \
-    && rm perl-5.20.3.tar.bz2 \
-    && cat *.patch | patch -p1 \
-    && echo 'print "1..0 # Skipped: Tests are invalid"' > /usr/src/perl/ext/GDBM_File/t/fatal.t
-RUN gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)" \
-    && archBits="$(dpkg-architecture --query DEB_BUILD_ARCH_BITS)" \
-    && archFlag="$([ "$archBits" = '64' ] && echo '-Duse64bitall' || echo '-Duse64bitint')" \
-    && ./Configure -Darchname="$gnuArch" "$archFlag" -Duselongdouble -Duseshrplib -Dvendorprefix=/usr/local -Aldflags='-Wl,-z,now -Wl,-zrelro -Wl,-z,noexecstack' -Accflags='-fpie -fPIC -fstack-protector-all -pie -D_FORTIFY_SOURCE=2' -Duseshrplib  -des \
-    && make -j$(nproc) \
-    && TEST_JOBS=$(nproc) make test_harness
-RUN make install \
-    && cd /usr/src \
-    && curl -LO https://www.cpan.org/authors/id/M/MI/MIYAGAWA/App-cpanminus-1.7044.tar.gz \
-    && echo '9b60767fe40752ef7a9d3f13f19060a63389a5c23acc3e9827e19b75500f81f3 *App-cpanminus-1.7044.tar.gz' | sha256sum -c - \
-    && tar -xzf App-cpanminus-1.7044.tar.gz && cd App-cpanminus-1.7044 && perl bin/cpanm . && cd /root \
-    && savedPackages="make netbase" \
-    && apt-mark auto '.*' > /dev/null \
-    && apt-mark manual $savedPackages \
-    && apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false \
-    && rm -fr /var/cache/apt/* /var/lib/apt/lists/* \
-    && rm -fr ./cpanm /root/.cpanm /usr/src/perl /usr/src/App-cpanminus-1.7044* /tmp/*
-
-WORKDIR /
-
-CMD ["perl5.20.3","-de0"]

5.020.003-main,longdouble-bullseye/fix-pack-longdouble.patch

@@ -1,41 +0,0 @@
-From a2db6c92fc2880ba1f288b6c4599a779997dd4e7 Mon Sep 17 00:00:00 2001
-From: Tony Cook <tony@develop-help.com>
-Date: Thu, 9 Apr 2015 15:45:16 +1000
-Subject: [PATCH] [perl #123971] fix long double pack padding on newer GCC
-
----
- pp_pack.c |   11 +++++++++++
- 1 file changed, 11 insertions(+)
-
-diff --git a/pp_pack.c b/pp_pack.c
-index 06adade..1d732a8 100644
---- a/pp_pack.c
-+++ b/pp_pack.c
-@@ -2709,6 +2709,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		anv.nv = sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(anv.bytes+10, sizeof(anv.bytes) - 10, U8);
-+#    endif
- #else
- 		anv.nv = SvNV(fromstr);
- #endif
-@@ -2726,6 +2732,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #  ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		aldouble.ld = (long double)sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(aldouble.bytes+10, sizeof(aldouble.bytes) - 10, U8);
-+#    endif
- #  else
- 		aldouble.ld = (long double)SvNV(fromstr);
- #  endif
--- 
-1.7.10.4
-
-

5.020.003-main,longdouble-buster/DevelPatchPerl.patch

@@ -1,281 +0,0 @@
-diff --git a/Configure b/Configure
-index 438b926..a762f78 100755
---- a/Configure
-+++ b/Configure
-@@ -4591,7 +4591,7 @@ else
- fi
- $rm -f try try.*
- case "$gccversion" in
--1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-+1.*) cpp=`./loc gcc-cpp $cpp $pth` ;;
- esac
- case "$gccversion" in
- '') gccosandvers='' ;;
-@@ -4631,7 +4631,7 @@ esac
- # gcc 3.* complain about adding -Idirectories that they already know about,
- # so we will take those off from locincpth.
- case "$gccversion" in
--3*)
-+3.*)
-     echo "main(){}">try.c
-     for incdir in $locincpth; do
-        warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
-@@ -5328,13 +5328,13 @@ fi
- case "$hint" in
- default|recommended)
- 	case "$gccversion" in
--	1*) dflt="$dflt -fpcc-struct-return" ;;
-+	1.*) dflt="$dflt -fpcc-struct-return" ;;
- 	esac
- 	case "$optimize:$DEBUGGING" in
- 	*-g*:old) dflt="$dflt -DDEBUGGING";;
- 	esac
- 	case "$gccversion" in
--	2*) if $test -d /etc/conf/kconfig.d &&
-+	2.*) if $test -d /etc/conf/kconfig.d &&
- 			$contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- 		then
- 			# Interactive Systems (ISC) POSIX mode.
-@@ -5343,7 +5343,7 @@ default|recommended)
- 		;;
- 	esac
- 	case "$gccversion" in
--	1*) ;;
-+	1.*) ;;
- 	2.[0-8]*) ;;
- 	?*)	set strict-aliasing -fno-strict-aliasing
- 		eval $checkccflag
-@@ -5445,7 +5445,7 @@ case "$cppflags" in
- *)  cppflags="$cppflags $ccflags" ;;
- esac
- case "$gccversion" in
--1*) cppflags="$cppflags -D__GNUC__"
-+1.*) cppflags="$cppflags -D__GNUC__"
- esac
- case "$mips_type" in
- '');;
-diff --git a/cpan/Time-Local/t/Local.t b/cpan/Time-Local/t/Local.t
-index 472e71a..0a852a0 100644
---- a/cpan/Time-Local/t/Local.t
-+++ b/cpan/Time-Local/t/Local.t
-@@ -91,7 +91,7 @@ for (@time, @neg_time) {
- 
-         # Test timelocal()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timelocal($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = localtime($time);
-@@ -107,7 +107,7 @@ for (@time, @neg_time) {
- 
-         # Test timegm()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timegm($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = gmtime($time);
-@@ -125,7 +125,6 @@ for (@time, @neg_time) {
- 
- for (@bad_time) {
-     my($year, $mon, $mday, $hour, $min, $sec) = @$_;
--    $year -= 1900;
-     $mon--;
- 
-     eval { timegm($sec,$min,$hour,$mday,$mon,$year) };
-@@ -134,14 +133,14 @@ for (@bad_time) {
- }
- 
- {
--    is(timelocal(0,0,1,1,0,90) - timelocal(0,0,0,1,0,90), 3600,
-+    is(timelocal(0,0,1,1,0,1990) - timelocal(0,0,0,1,0,1990), 3600,
-        'one hour difference between two calls to timelocal');
- 
--    is(timelocal(1,2,3,1,0,100) - timelocal(1,2,3,31,11,99), 24 * 3600,
-+    is(timelocal(1,2,3,1,0,2000) - timelocal(1,2,3,31,11,1999), 24 * 3600,
-        'one day difference between two calls to timelocal');
- 
-     # Diff beween Jan 1, 1980 and Mar 1, 1980 = (31 + 29 = 60 days)
--    is(timegm(0,0,0, 1, 2, 80) - timegm(0,0,0, 1, 0, 80), 60 * 24 * 3600,
-+    is(timegm(0,0,0, 1, 2, 1980) - timegm(0,0,0, 1, 0, 1980), 60 * 24 * 3600,
-        '60 day difference between two calls to timegm');
- }
- 
-diff --git a/hints/linux.sh b/hints/linux.sh
-index 956adfc..c749f0f 100644
---- a/hints/linux.sh
-+++ b/hints/linux.sh
-@@ -85,7 +85,7 @@ uname_minus_m="${uname_minus_m:-"$targetarch"}"
- 
- # Check if we're about to use Intel's ICC compiler
- case "`${cc:-cc} -V 2>&1`" in
--*"Intel(R) C++ Compiler"*|*"Intel(R) C Compiler"*)
-+*"Intel(R) C"*" Compiler"*)
-     # record the version, formats:
-     # icc (ICC) 10.1 20080801
-     # icpc (ICC) 10.1 20080801
-@@ -165,6 +165,9 @@ esac
- # plibpth to bypass this check.
- if [ -x /usr/bin/gcc ] ; then
-     gcc=/usr/bin/gcc
-+# clang also provides -print-search-dirs
-+elif ${cc:-cc} --version 2>/dev/null | grep -q '^clang ' ; then
-+    gcc=${cc:-cc}
- else
-     gcc=gcc
- fi
-@@ -178,6 +181,33 @@ case "$plibpth" in
-     ;;
- esac
- 
-+# For the musl libc, perl should #define _GNU_SOURCE.  Otherwise, some
-+# available functions, like memem, won't be used.  See the discussion in
-+# [perl #133760].  musl doesn't offer an easy way to identify it, but,
-+# at least on alpine linux, the ldd --version output contains the
-+# string 'musl.'
-+case `ldd --version 2>&1` in
-+    musl*)  ccflags="$ccflags -D_GNU_SOURCE" ;;
-+        *) ;;
-+esac
-+
-+# libquadmath is sometimes installed as gcc internal library,
-+# so contrary to our usual policy of *not* looking at gcc internal
-+# directories we now *do* look at them, in case they contain
-+# the quadmath library.
-+# XXX This may apply to other gcc internal libraries, if such exist.
-+# XXX This could be at Configure level, but then the $gcc is messy.
-+case "$usequadmath" in
-+"$define")
-+  for d in `LANG=C LC_ALL=C $gcc $ccflags $ldflags -print-search-dirs | grep libraries | cut -f2- -d= | tr ':' $trnl | grep 'gcc' | sed -e 's:/$::'`
-+  do
-+    case `ls $d/*libquadmath*$so* 2>/dev/null` in
-+    $d/*libquadmath*$so*) xlibpth="$xlibpth $d" ;;
-+    esac
-+  done
-+  ;;
-+esac
-+
- case "$libc" in
- '')
- # If you have glibc, then report the version for ./myconfig bug reporting.
-@@ -204,92 +234,6 @@ case "$libc" in
-     ;;
- esac
- 
--# Are we using ELF?  Thanks to Kenneth Albanowski <kjahds@kjahds.com>
--# for this test.
--cat >try.c <<'EOM'
--/* Test for whether ELF binaries are produced */
--#include <fcntl.h>
--#include <stdlib.h>
--#include <unistd.h>
--main() {
--	char buffer[4];
--	int i=open("a.out",O_RDONLY);
--	if(i==-1)
--		exit(1); /* fail */
--	if(read(i,&buffer[0],4)<4)
--		exit(1); /* fail */
--	if(buffer[0] != 127 || buffer[1] != 'E' ||
--           buffer[2] != 'L' || buffer[3] != 'F')
--		exit(1); /* fail */
--	exit(0); /* succeed (yes, it's ELF) */
--}
--EOM
--if ${cc:-gcc} $ccflags $ldflags try.c >/dev/null 2>&1 && $run ./a.out; then
--    cat <<'EOM' >&4
--
--You appear to have ELF support.  I'll try to use it for dynamic loading.
--If dynamic loading doesn't work, read hints/linux.sh for further information.
--EOM
--
--else
--    cat <<'EOM' >&4
--
--You don't have an ELF gcc.  I will use dld if possible.  If you are
--using a version of DLD earlier than 3.2.6, or don't have it at all, you
--should probably upgrade. If you are forced to use 3.2.4, you should
--uncomment a couple of lines in hints/linux.sh and restart Configure so
--that shared libraries will be disallowed.
--
--EOM
--    lddlflags="-r $lddlflags"
--    # These empty values are so that Configure doesn't put in the
--    # Linux ELF values.
--    ccdlflags=' '
--    cccdlflags=' '
--    ccflags="-DOVR_DBL_DIG=14 $ccflags"
--    so='sa'
--    dlext='o'
--    nm_so_opt=' '
--    ## If you are using DLD 3.2.4 which does not support shared libs,
--    ## uncomment the next two lines:
--    #ldflags="-static"
--    #so='none'
--
--	# In addition, on some systems there is a problem with perl and NDBM
--	# which causes AnyDBM and NDBM_File to lock up. This is evidenced
--	# in the tests as AnyDBM just freezing.  Apparently, this only
--	# happens on a.out systems, so we disable NDBM for all a.out linux
--	# systems.  If someone can suggest a more robust test
--	#  that would be appreciated.
--	#
--	# More info:
--	# Date: Wed, 7 Feb 1996 03:21:04 +0900
--	# From: Jeffrey Friedl <jfriedl@nff.ncl.omron.co.jp>
--	#
--	# I tried compiling with DBM support and sure enough things locked up
--	# just as advertised. Checking into it, I found that the lockup was
--	# during the call to dbm_open. Not *in* dbm_open -- but between the call
--	# to and the jump into.
--	#
--	# To make a long story short, making sure that the *.a and *.sa pairs of
--	#   /usr/lib/lib{m,db,gdbm}.{a,sa}
--	# were perfectly in sync took care of it.
--	#
--	# This will generate a harmless Whoa There! message
--	case "$d_dbm_open" in
--	'')	cat <<'EOM' >&4
--
--Disabling ndbm.  This will generate a Whoa There message in Configure.
--Read hints/linux.sh for further information.
--EOM
--		# You can override this with Configure -Dd_dbm_open
--		d_dbm_open=undef
--		;;
--	esac
--fi
--
--rm -f try.c a.out
--
- if ${sh:-/bin/sh} -c exit; then
-   echo ''
-   echo 'You appear to have a working bash.  Good.'
-@@ -497,7 +441,7 @@ then
-        DBLIB="$DBDIR/libdb.so"
-        if [ -f $DBLIB ]
-        then
--         if ${nm:-nm} -u $DBLIB | grep pthread >/dev/null
-+         if ${nm:-nm} -u $DBLIB 2>/dev/null | grep pthread >/dev/null
-          then
-            if ldd $DBLIB | grep pthread >/dev/null
-            then
-diff --git a/pp.c b/pp.c
-index 4ec6887..729239c 100644
---- a/pp.c
-+++ b/pp.c
-@@ -3435,8 +3435,12 @@ PP(pp_crypt)
- #if defined(__GLIBC__) || defined(__EMX__)
- 	if (PL_reentrant_buffer->_crypt_struct_buffer) {
- 	    PL_reentrant_buffer->_crypt_struct_buffer->initialized = 0;
--	    /* work around glibc-2.2.5 bug */
-+#if (defined(__GLIBC__) && __GLIBC__ == 2) && \
-+    (defined(__GLIBC_MINOR__) && __GLIBC_MINOR__ >= 2 && __GLIBC_MINOR__ < 4)
-+	    /* work around glibc-2.2.5 bug, has been fixed at some
-+	     * time in glibc-2.3.X */
- 	    PL_reentrant_buffer->_crypt_struct_buffer->current_saltbits = 0;
-+#endif
- 	}
- #endif
-     }

5.020.003-main,longdouble-buster/Dockerfile

@@ -1,59 +0,0 @@
-FROM debian:buster-backports
-LABEL maintainer="Ryan Voots <simcop@cpan.org>"
-
-COPY *.patch /usr/src/perl/
-WORKDIR /usr/src/perl
-
-ENV DEBIAN_FRONTEND=noninteractive
-
-RUN perl -i.bak -pE '$x=$_; $x=~s|^deb |deb-src |g;$_.=$x' /etc/apt/sources.list \
-    && apt update \
-    && apt -yq full-upgrade \
-    && apt -yq build-dep perl \
-    &&     apt-get install -y --no-install-recommends \
-       bzip2 \
-       ca-certificates \
-       # cpio \
-       curl \
-       dpkg-dev \
-       # file \
-       gcc \
-       # g++ \
-       libbz2-dev \
-       libdb-dev \
-       libc6-dev \
-       libgdbm-dev \
-       liblzma-dev \
-       make \
-       netbase \
-       patch \
-       procps \
-       zlib1g-dev \
-       xz-utils \
-    && curl -SL https://www.cpan.org/src/5.0/perl-5.20.3.tar.bz2 -o perl-5.20.3.tar.bz2 \
-    && echo '1b40068166c242e34a536836286e70b78410602a80615143301e52aa2901493b *perl-5.20.3.tar.bz2' | sha256sum -c -
-RUN tar --strip-components=1 -xaf perl-5.20.3.tar.bz2 -C /usr/src/perl \
-    && rm perl-5.20.3.tar.bz2 \
-    && cat *.patch | patch -p1 \
-    && echo 'print "1..0 # Skipped: Tests are invalid"' > /usr/src/perl/ext/GDBM_File/t/fatal.t
-RUN gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)" \
-    && archBits="$(dpkg-architecture --query DEB_BUILD_ARCH_BITS)" \
-    && archFlag="$([ "$archBits" = '64' ] && echo '-Duse64bitall' || echo '-Duse64bitint')" \
-    && ./Configure -Darchname="$gnuArch" "$archFlag" -Duselongdouble -Duseshrplib -Dvendorprefix=/usr/local -Aldflags='-Wl,-z,now -Wl,-zrelro -Wl,-z,noexecstack' -Accflags='-fpie -fPIC -fstack-protector-all -pie -D_FORTIFY_SOURCE=2' -Duseshrplib  -des \
-    && make -j$(nproc) \
-    && TEST_JOBS=$(nproc) make test_harness
-RUN make install \
-    && cd /usr/src \
-    && curl -LO https://www.cpan.org/authors/id/M/MI/MIYAGAWA/App-cpanminus-1.7044.tar.gz \
-    && echo '9b60767fe40752ef7a9d3f13f19060a63389a5c23acc3e9827e19b75500f81f3 *App-cpanminus-1.7044.tar.gz' | sha256sum -c - \
-    && tar -xzf App-cpanminus-1.7044.tar.gz && cd App-cpanminus-1.7044 && perl bin/cpanm . && cd /root \
-    && savedPackages="make netbase" \
-    && apt-mark auto '.*' > /dev/null \
-    && apt-mark manual $savedPackages \
-    && apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false \
-    && rm -fr /var/cache/apt/* /var/lib/apt/lists/* \
-    && rm -fr ./cpanm /root/.cpanm /usr/src/perl /usr/src/App-cpanminus-1.7044* /tmp/*
-
-WORKDIR /
-
-CMD ["perl5.20.3","-de0"]

5.020.003-main,longdouble-buster/fix-pack-longdouble.patch

@@ -1,41 +0,0 @@
-From a2db6c92fc2880ba1f288b6c4599a779997dd4e7 Mon Sep 17 00:00:00 2001
-From: Tony Cook <tony@develop-help.com>
-Date: Thu, 9 Apr 2015 15:45:16 +1000
-Subject: [PATCH] [perl #123971] fix long double pack padding on newer GCC
-
----
- pp_pack.c |   11 +++++++++++
- 1 file changed, 11 insertions(+)
-
-diff --git a/pp_pack.c b/pp_pack.c
-index 06adade..1d732a8 100644
---- a/pp_pack.c
-+++ b/pp_pack.c
-@@ -2709,6 +2709,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		anv.nv = sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(anv.bytes+10, sizeof(anv.bytes) - 10, U8);
-+#    endif
- #else
- 		anv.nv = SvNV(fromstr);
- #endif
-@@ -2726,6 +2732,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #  ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		aldouble.ld = (long double)sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(aldouble.bytes+10, sizeof(aldouble.bytes) - 10, U8);
-+#    endif
- #  else
- 		aldouble.ld = (long double)SvNV(fromstr);
- #  endif
--- 
-1.7.10.4
-
-

5.020.003-main,quadmath,threaded-bullseye/DevelPatchPerl.patch

@@ -1,281 +0,0 @@
-diff --git a/Configure b/Configure
-index 438b926..a762f78 100755
---- a/Configure
-+++ b/Configure
-@@ -4591,7 +4591,7 @@ else
- fi
- $rm -f try try.*
- case "$gccversion" in
--1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-+1.*) cpp=`./loc gcc-cpp $cpp $pth` ;;
- esac
- case "$gccversion" in
- '') gccosandvers='' ;;
-@@ -4631,7 +4631,7 @@ esac
- # gcc 3.* complain about adding -Idirectories that they already know about,
- # so we will take those off from locincpth.
- case "$gccversion" in
--3*)
-+3.*)
-     echo "main(){}">try.c
-     for incdir in $locincpth; do
-        warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
-@@ -5328,13 +5328,13 @@ fi
- case "$hint" in
- default|recommended)
- 	case "$gccversion" in
--	1*) dflt="$dflt -fpcc-struct-return" ;;
-+	1.*) dflt="$dflt -fpcc-struct-return" ;;
- 	esac
- 	case "$optimize:$DEBUGGING" in
- 	*-g*:old) dflt="$dflt -DDEBUGGING";;
- 	esac
- 	case "$gccversion" in
--	2*) if $test -d /etc/conf/kconfig.d &&
-+	2.*) if $test -d /etc/conf/kconfig.d &&
- 			$contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- 		then
- 			# Interactive Systems (ISC) POSIX mode.
-@@ -5343,7 +5343,7 @@ default|recommended)
- 		;;
- 	esac
- 	case "$gccversion" in
--	1*) ;;
-+	1.*) ;;
- 	2.[0-8]*) ;;
- 	?*)	set strict-aliasing -fno-strict-aliasing
- 		eval $checkccflag
-@@ -5445,7 +5445,7 @@ case "$cppflags" in
- *)  cppflags="$cppflags $ccflags" ;;
- esac
- case "$gccversion" in
--1*) cppflags="$cppflags -D__GNUC__"
-+1.*) cppflags="$cppflags -D__GNUC__"
- esac
- case "$mips_type" in
- '');;
-diff --git a/cpan/Time-Local/t/Local.t b/cpan/Time-Local/t/Local.t
-index 472e71a..0a852a0 100644
---- a/cpan/Time-Local/t/Local.t
-+++ b/cpan/Time-Local/t/Local.t
-@@ -91,7 +91,7 @@ for (@time, @neg_time) {
- 
-         # Test timelocal()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timelocal($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = localtime($time);
-@@ -107,7 +107,7 @@ for (@time, @neg_time) {
- 
-         # Test timegm()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timegm($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = gmtime($time);
-@@ -125,7 +125,6 @@ for (@time, @neg_time) {
- 
- for (@bad_time) {
-     my($year, $mon, $mday, $hour, $min, $sec) = @$_;
--    $year -= 1900;
-     $mon--;
- 
-     eval { timegm($sec,$min,$hour,$mday,$mon,$year) };
-@@ -134,14 +133,14 @@ for (@bad_time) {
- }
- 
- {
--    is(timelocal(0,0,1,1,0,90) - timelocal(0,0,0,1,0,90), 3600,
-+    is(timelocal(0,0,1,1,0,1990) - timelocal(0,0,0,1,0,1990), 3600,
-        'one hour difference between two calls to timelocal');
- 
--    is(timelocal(1,2,3,1,0,100) - timelocal(1,2,3,31,11,99), 24 * 3600,
-+    is(timelocal(1,2,3,1,0,2000) - timelocal(1,2,3,31,11,1999), 24 * 3600,
-        'one day difference between two calls to timelocal');
- 
-     # Diff beween Jan 1, 1980 and Mar 1, 1980 = (31 + 29 = 60 days)
--    is(timegm(0,0,0, 1, 2, 80) - timegm(0,0,0, 1, 0, 80), 60 * 24 * 3600,
-+    is(timegm(0,0,0, 1, 2, 1980) - timegm(0,0,0, 1, 0, 1980), 60 * 24 * 3600,
-        '60 day difference between two calls to timegm');
- }
- 
-diff --git a/hints/linux.sh b/hints/linux.sh
-index 956adfc..c749f0f 100644
---- a/hints/linux.sh
-+++ b/hints/linux.sh
-@@ -85,7 +85,7 @@ uname_minus_m="${uname_minus_m:-"$targetarch"}"
- 
- # Check if we're about to use Intel's ICC compiler
- case "`${cc:-cc} -V 2>&1`" in
--*"Intel(R) C++ Compiler"*|*"Intel(R) C Compiler"*)
-+*"Intel(R) C"*" Compiler"*)
-     # record the version, formats:
-     # icc (ICC) 10.1 20080801
-     # icpc (ICC) 10.1 20080801
-@@ -165,6 +165,9 @@ esac
- # plibpth to bypass this check.
- if [ -x /usr/bin/gcc ] ; then
-     gcc=/usr/bin/gcc
-+# clang also provides -print-search-dirs
-+elif ${cc:-cc} --version 2>/dev/null | grep -q '^clang ' ; then
-+    gcc=${cc:-cc}
- else
-     gcc=gcc
- fi
-@@ -178,6 +181,33 @@ case "$plibpth" in
-     ;;
- esac
- 
-+# For the musl libc, perl should #define _GNU_SOURCE.  Otherwise, some
-+# available functions, like memem, won't be used.  See the discussion in
-+# [perl #133760].  musl doesn't offer an easy way to identify it, but,
-+# at least on alpine linux, the ldd --version output contains the
-+# string 'musl.'
-+case `ldd --version 2>&1` in
-+    musl*)  ccflags="$ccflags -D_GNU_SOURCE" ;;
-+        *) ;;
-+esac
-+
-+# libquadmath is sometimes installed as gcc internal library,
-+# so contrary to our usual policy of *not* looking at gcc internal
-+# directories we now *do* look at them, in case they contain
-+# the quadmath library.
-+# XXX This may apply to other gcc internal libraries, if such exist.
-+# XXX This could be at Configure level, but then the $gcc is messy.
-+case "$usequadmath" in
-+"$define")
-+  for d in `LANG=C LC_ALL=C $gcc $ccflags $ldflags -print-search-dirs | grep libraries | cut -f2- -d= | tr ':' $trnl | grep 'gcc' | sed -e 's:/$::'`
-+  do
-+    case `ls $d/*libquadmath*$so* 2>/dev/null` in
-+    $d/*libquadmath*$so*) xlibpth="$xlibpth $d" ;;
-+    esac
-+  done
-+  ;;
-+esac
-+
- case "$libc" in
- '')
- # If you have glibc, then report the version for ./myconfig bug reporting.
-@@ -204,92 +234,6 @@ case "$libc" in
-     ;;
- esac
- 
--# Are we using ELF?  Thanks to Kenneth Albanowski <kjahds@kjahds.com>
--# for this test.
--cat >try.c <<'EOM'
--/* Test for whether ELF binaries are produced */
--#include <fcntl.h>
--#include <stdlib.h>
--#include <unistd.h>
--main() {
--	char buffer[4];
--	int i=open("a.out",O_RDONLY);
--	if(i==-1)
--		exit(1); /* fail */
--	if(read(i,&buffer[0],4)<4)
--		exit(1); /* fail */
--	if(buffer[0] != 127 || buffer[1] != 'E' ||
--           buffer[2] != 'L' || buffer[3] != 'F')
--		exit(1); /* fail */
--	exit(0); /* succeed (yes, it's ELF) */
--}
--EOM
--if ${cc:-gcc} $ccflags $ldflags try.c >/dev/null 2>&1 && $run ./a.out; then
--    cat <<'EOM' >&4
--
--You appear to have ELF support.  I'll try to use it for dynamic loading.
--If dynamic loading doesn't work, read hints/linux.sh for further information.
--EOM
--
--else
--    cat <<'EOM' >&4
--
--You don't have an ELF gcc.  I will use dld if possible.  If you are
--using a version of DLD earlier than 3.2.6, or don't have it at all, you
--should probably upgrade. If you are forced to use 3.2.4, you should
--uncomment a couple of lines in hints/linux.sh and restart Configure so
--that shared libraries will be disallowed.
--
--EOM
--    lddlflags="-r $lddlflags"
--    # These empty values are so that Configure doesn't put in the
--    # Linux ELF values.
--    ccdlflags=' '
--    cccdlflags=' '
--    ccflags="-DOVR_DBL_DIG=14 $ccflags"
--    so='sa'
--    dlext='o'
--    nm_so_opt=' '
--    ## If you are using DLD 3.2.4 which does not support shared libs,
--    ## uncomment the next two lines:
--    #ldflags="-static"
--    #so='none'
--
--	# In addition, on some systems there is a problem with perl and NDBM
--	# which causes AnyDBM and NDBM_File to lock up. This is evidenced
--	# in the tests as AnyDBM just freezing.  Apparently, this only
--	# happens on a.out systems, so we disable NDBM for all a.out linux
--	# systems.  If someone can suggest a more robust test
--	#  that would be appreciated.
--	#
--	# More info:
--	# Date: Wed, 7 Feb 1996 03:21:04 +0900
--	# From: Jeffrey Friedl <jfriedl@nff.ncl.omron.co.jp>
--	#
--	# I tried compiling with DBM support and sure enough things locked up
--	# just as advertised. Checking into it, I found that the lockup was
--	# during the call to dbm_open. Not *in* dbm_open -- but between the call
--	# to and the jump into.
--	#
--	# To make a long story short, making sure that the *.a and *.sa pairs of
--	#   /usr/lib/lib{m,db,gdbm}.{a,sa}
--	# were perfectly in sync took care of it.
--	#
--	# This will generate a harmless Whoa There! message
--	case "$d_dbm_open" in
--	'')	cat <<'EOM' >&4
--
--Disabling ndbm.  This will generate a Whoa There message in Configure.
--Read hints/linux.sh for further information.
--EOM
--		# You can override this with Configure -Dd_dbm_open
--		d_dbm_open=undef
--		;;
--	esac
--fi
--
--rm -f try.c a.out
--
- if ${sh:-/bin/sh} -c exit; then
-   echo ''
-   echo 'You appear to have a working bash.  Good.'
-@@ -497,7 +441,7 @@ then
-        DBLIB="$DBDIR/libdb.so"
-        if [ -f $DBLIB ]
-        then
--         if ${nm:-nm} -u $DBLIB | grep pthread >/dev/null
-+         if ${nm:-nm} -u $DBLIB 2>/dev/null | grep pthread >/dev/null
-          then
-            if ldd $DBLIB | grep pthread >/dev/null
-            then
-diff --git a/pp.c b/pp.c
-index 4ec6887..729239c 100644
---- a/pp.c
-+++ b/pp.c
-@@ -3435,8 +3435,12 @@ PP(pp_crypt)
- #if defined(__GLIBC__) || defined(__EMX__)
- 	if (PL_reentrant_buffer->_crypt_struct_buffer) {
- 	    PL_reentrant_buffer->_crypt_struct_buffer->initialized = 0;
--	    /* work around glibc-2.2.5 bug */
-+#if (defined(__GLIBC__) && __GLIBC__ == 2) && \
-+    (defined(__GLIBC_MINOR__) && __GLIBC_MINOR__ >= 2 && __GLIBC_MINOR__ < 4)
-+	    /* work around glibc-2.2.5 bug, has been fixed at some
-+	     * time in glibc-2.3.X */
- 	    PL_reentrant_buffer->_crypt_struct_buffer->current_saltbits = 0;
-+#endif
- 	}
- #endif
-     }

5.020.003-main,quadmath,threaded-bullseye/Dockerfile

@@ -1,59 +0,0 @@
-FROM debian:bullseye-backports
-LABEL maintainer="Ryan Voots <simcop@cpan.org>"
-
-COPY *.patch /usr/src/perl/
-WORKDIR /usr/src/perl
-
-ENV DEBIAN_FRONTEND=noninteractive
-
-RUN perl -i.bak -pE '$x=$_; $x=~s|^deb |deb-src |g;$_.=$x' /etc/apt/sources.list \
-    && apt update \
-    && apt -yq full-upgrade \
-    && apt -yq build-dep perl \
-    &&     apt-get install -y --no-install-recommends \
-       bzip2 \
-       ca-certificates \
-       # cpio \
-       curl \
-       dpkg-dev \
-       # file \
-       gcc \
-       # g++ \
-       libbz2-dev \
-       libdb-dev \
-       libc6-dev \
-       libgdbm-dev \
-       liblzma-dev \
-       make \
-       netbase \
-       patch \
-       procps \
-       zlib1g-dev \
-       xz-utils \
-    && curl -SL https://www.cpan.org/src/5.0/perl-5.20.3.tar.bz2 -o perl-5.20.3.tar.bz2 \
-    && echo '1b40068166c242e34a536836286e70b78410602a80615143301e52aa2901493b *perl-5.20.3.tar.bz2' | sha256sum -c -
-RUN tar --strip-components=1 -xaf perl-5.20.3.tar.bz2 -C /usr/src/perl \
-    && rm perl-5.20.3.tar.bz2 \
-    && cat *.patch | patch -p1 \
-    && echo 'print "1..0 # Skipped: Tests are invalid"' > /usr/src/perl/ext/GDBM_File/t/fatal.t
-RUN gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)" \
-    && archBits="$(dpkg-architecture --query DEB_BUILD_ARCH_BITS)" \
-    && archFlag="$([ "$archBits" = '64' ] && echo '-Duse64bitall' || echo '-Duse64bitint')" \
-    && ./Configure -Darchname="$gnuArch" "$archFlag" -Dusequadmath -Dusethreads -Duseshrplib -Dvendorprefix=/usr/local -Aldflags='-Wl,-z,now -Wl,-zrelro -Wl,-z,noexecstack' -Accflags='-fpie -fPIC -fstack-protector-all -pie -D_FORTIFY_SOURCE=2' -Duseshrplib  -des \
-    && make -j$(nproc) \
-    && TEST_JOBS=$(nproc) make test_harness
-RUN make install \
-    && cd /usr/src \
-    && curl -LO https://www.cpan.org/authors/id/M/MI/MIYAGAWA/App-cpanminus-1.7044.tar.gz \
-    && echo '9b60767fe40752ef7a9d3f13f19060a63389a5c23acc3e9827e19b75500f81f3 *App-cpanminus-1.7044.tar.gz' | sha256sum -c - \
-    && tar -xzf App-cpanminus-1.7044.tar.gz && cd App-cpanminus-1.7044 && perl bin/cpanm . && cd /root \
-    && savedPackages="make netbase" \
-    && apt-mark auto '.*' > /dev/null \
-    && apt-mark manual $savedPackages \
-    && apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false \
-    && rm -fr /var/cache/apt/* /var/lib/apt/lists/* \
-    && rm -fr ./cpanm /root/.cpanm /usr/src/perl /usr/src/App-cpanminus-1.7044* /tmp/*
-
-WORKDIR /
-
-CMD ["perl5.20.3","-de0"]

5.020.003-main,quadmath,threaded-bullseye/fix-pack-longdouble.patch

@@ -1,41 +0,0 @@
-From a2db6c92fc2880ba1f288b6c4599a779997dd4e7 Mon Sep 17 00:00:00 2001
-From: Tony Cook <tony@develop-help.com>
-Date: Thu, 9 Apr 2015 15:45:16 +1000
-Subject: [PATCH] [perl #123971] fix long double pack padding on newer GCC
-
----
- pp_pack.c |   11 +++++++++++
- 1 file changed, 11 insertions(+)
-
-diff --git a/pp_pack.c b/pp_pack.c
-index 06adade..1d732a8 100644
---- a/pp_pack.c
-+++ b/pp_pack.c
-@@ -2709,6 +2709,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		anv.nv = sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(anv.bytes+10, sizeof(anv.bytes) - 10, U8);
-+#    endif
- #else
- 		anv.nv = SvNV(fromstr);
- #endif
-@@ -2726,6 +2732,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #  ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		aldouble.ld = (long double)sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(aldouble.bytes+10, sizeof(aldouble.bytes) - 10, U8);
-+#    endif
- #  else
- 		aldouble.ld = (long double)SvNV(fromstr);
- #  endif
--- 
-1.7.10.4
-
-

5.020.003-main,quadmath,threaded-buster/DevelPatchPerl.patch

@@ -1,281 +0,0 @@
-diff --git a/Configure b/Configure
-index 438b926..a762f78 100755
---- a/Configure
-+++ b/Configure
-@@ -4591,7 +4591,7 @@ else
- fi
- $rm -f try try.*
- case "$gccversion" in
--1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-+1.*) cpp=`./loc gcc-cpp $cpp $pth` ;;
- esac
- case "$gccversion" in
- '') gccosandvers='' ;;
-@@ -4631,7 +4631,7 @@ esac
- # gcc 3.* complain about adding -Idirectories that they already know about,
- # so we will take those off from locincpth.
- case "$gccversion" in
--3*)
-+3.*)
-     echo "main(){}">try.c
-     for incdir in $locincpth; do
-        warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
-@@ -5328,13 +5328,13 @@ fi
- case "$hint" in
- default|recommended)
- 	case "$gccversion" in
--	1*) dflt="$dflt -fpcc-struct-return" ;;
-+	1.*) dflt="$dflt -fpcc-struct-return" ;;
- 	esac
- 	case "$optimize:$DEBUGGING" in
- 	*-g*:old) dflt="$dflt -DDEBUGGING";;
- 	esac
- 	case "$gccversion" in
--	2*) if $test -d /etc/conf/kconfig.d &&
-+	2.*) if $test -d /etc/conf/kconfig.d &&
- 			$contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- 		then
- 			# Interactive Systems (ISC) POSIX mode.
-@@ -5343,7 +5343,7 @@ default|recommended)
- 		;;
- 	esac
- 	case "$gccversion" in
--	1*) ;;
-+	1.*) ;;
- 	2.[0-8]*) ;;
- 	?*)	set strict-aliasing -fno-strict-aliasing
- 		eval $checkccflag
-@@ -5445,7 +5445,7 @@ case "$cppflags" in
- *)  cppflags="$cppflags $ccflags" ;;
- esac
- case "$gccversion" in
--1*) cppflags="$cppflags -D__GNUC__"
-+1.*) cppflags="$cppflags -D__GNUC__"
- esac
- case "$mips_type" in
- '');;
-diff --git a/cpan/Time-Local/t/Local.t b/cpan/Time-Local/t/Local.t
-index 472e71a..0a852a0 100644
---- a/cpan/Time-Local/t/Local.t
-+++ b/cpan/Time-Local/t/Local.t
-@@ -91,7 +91,7 @@ for (@time, @neg_time) {
- 
-         # Test timelocal()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timelocal($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = localtime($time);
-@@ -107,7 +107,7 @@ for (@time, @neg_time) {
- 
-         # Test timegm()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timegm($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = gmtime($time);
-@@ -125,7 +125,6 @@ for (@time, @neg_time) {
- 
- for (@bad_time) {
-     my($year, $mon, $mday, $hour, $min, $sec) = @$_;
--    $year -= 1900;
-     $mon--;
- 
-     eval { timegm($sec,$min,$hour,$mday,$mon,$year) };
-@@ -134,14 +133,14 @@ for (@bad_time) {
- }
- 
- {
--    is(timelocal(0,0,1,1,0,90) - timelocal(0,0,0,1,0,90), 3600,
-+    is(timelocal(0,0,1,1,0,1990) - timelocal(0,0,0,1,0,1990), 3600,
-        'one hour difference between two calls to timelocal');
- 
--    is(timelocal(1,2,3,1,0,100) - timelocal(1,2,3,31,11,99), 24 * 3600,
-+    is(timelocal(1,2,3,1,0,2000) - timelocal(1,2,3,31,11,1999), 24 * 3600,
-        'one day difference between two calls to timelocal');
- 
-     # Diff beween Jan 1, 1980 and Mar 1, 1980 = (31 + 29 = 60 days)
--    is(timegm(0,0,0, 1, 2, 80) - timegm(0,0,0, 1, 0, 80), 60 * 24 * 3600,
-+    is(timegm(0,0,0, 1, 2, 1980) - timegm(0,0,0, 1, 0, 1980), 60 * 24 * 3600,
-        '60 day difference between two calls to timegm');
- }
- 
-diff --git a/hints/linux.sh b/hints/linux.sh
-index 956adfc..c749f0f 100644
---- a/hints/linux.sh
-+++ b/hints/linux.sh
-@@ -85,7 +85,7 @@ uname_minus_m="${uname_minus_m:-"$targetarch"}"
- 
- # Check if we're about to use Intel's ICC compiler
- case "`${cc:-cc} -V 2>&1`" in
--*"Intel(R) C++ Compiler"*|*"Intel(R) C Compiler"*)
-+*"Intel(R) C"*" Compiler"*)
-     # record the version, formats:
-     # icc (ICC) 10.1 20080801
-     # icpc (ICC) 10.1 20080801
-@@ -165,6 +165,9 @@ esac
- # plibpth to bypass this check.
- if [ -x /usr/bin/gcc ] ; then
-     gcc=/usr/bin/gcc
-+# clang also provides -print-search-dirs
-+elif ${cc:-cc} --version 2>/dev/null | grep -q '^clang ' ; then
-+    gcc=${cc:-cc}
- else
-     gcc=gcc
- fi
-@@ -178,6 +181,33 @@ case "$plibpth" in
-     ;;
- esac
- 
-+# For the musl libc, perl should #define _GNU_SOURCE.  Otherwise, some
-+# available functions, like memem, won't be used.  See the discussion in
-+# [perl #133760].  musl doesn't offer an easy way to identify it, but,
-+# at least on alpine linux, the ldd --version output contains the
-+# string 'musl.'
-+case `ldd --version 2>&1` in
-+    musl*)  ccflags="$ccflags -D_GNU_SOURCE" ;;
-+        *) ;;
-+esac
-+
-+# libquadmath is sometimes installed as gcc internal library,
-+# so contrary to our usual policy of *not* looking at gcc internal
-+# directories we now *do* look at them, in case they contain
-+# the quadmath library.
-+# XXX This may apply to other gcc internal libraries, if such exist.
-+# XXX This could be at Configure level, but then the $gcc is messy.
-+case "$usequadmath" in
-+"$define")
-+  for d in `LANG=C LC_ALL=C $gcc $ccflags $ldflags -print-search-dirs | grep libraries | cut -f2- -d= | tr ':' $trnl | grep 'gcc' | sed -e 's:/$::'`
-+  do
-+    case `ls $d/*libquadmath*$so* 2>/dev/null` in
-+    $d/*libquadmath*$so*) xlibpth="$xlibpth $d" ;;
-+    esac
-+  done
-+  ;;
-+esac
-+
- case "$libc" in
- '')
- # If you have glibc, then report the version for ./myconfig bug reporting.
-@@ -204,92 +234,6 @@ case "$libc" in
-     ;;
- esac
- 
--# Are we using ELF?  Thanks to Kenneth Albanowski <kjahds@kjahds.com>
--# for this test.
--cat >try.c <<'EOM'
--/* Test for whether ELF binaries are produced */
--#include <fcntl.h>
--#include <stdlib.h>
--#include <unistd.h>
--main() {
--	char buffer[4];
--	int i=open("a.out",O_RDONLY);
--	if(i==-1)
--		exit(1); /* fail */
--	if(read(i,&buffer[0],4)<4)
--		exit(1); /* fail */
--	if(buffer[0] != 127 || buffer[1] != 'E' ||
--           buffer[2] != 'L' || buffer[3] != 'F')
--		exit(1); /* fail */
--	exit(0); /* succeed (yes, it's ELF) */
--}
--EOM
--if ${cc:-gcc} $ccflags $ldflags try.c >/dev/null 2>&1 && $run ./a.out; then
--    cat <<'EOM' >&4
--
--You appear to have ELF support.  I'll try to use it for dynamic loading.
--If dynamic loading doesn't work, read hints/linux.sh for further information.
--EOM
--
--else
--    cat <<'EOM' >&4
--
--You don't have an ELF gcc.  I will use dld if possible.  If you are
--using a version of DLD earlier than 3.2.6, or don't have it at all, you
--should probably upgrade. If you are forced to use 3.2.4, you should
--uncomment a couple of lines in hints/linux.sh and restart Configure so
--that shared libraries will be disallowed.
--
--EOM
--    lddlflags="-r $lddlflags"
--    # These empty values are so that Configure doesn't put in the
--    # Linux ELF values.
--    ccdlflags=' '
--    cccdlflags=' '
--    ccflags="-DOVR_DBL_DIG=14 $ccflags"
--    so='sa'
--    dlext='o'
--    nm_so_opt=' '
--    ## If you are using DLD 3.2.4 which does not support shared libs,
--    ## uncomment the next two lines:
--    #ldflags="-static"
--    #so='none'
--
--	# In addition, on some systems there is a problem with perl and NDBM
--	# which causes AnyDBM and NDBM_File to lock up. This is evidenced
--	# in the tests as AnyDBM just freezing.  Apparently, this only
--	# happens on a.out systems, so we disable NDBM for all a.out linux
--	# systems.  If someone can suggest a more robust test
--	#  that would be appreciated.
--	#
--	# More info:
--	# Date: Wed, 7 Feb 1996 03:21:04 +0900
--	# From: Jeffrey Friedl <jfriedl@nff.ncl.omron.co.jp>
--	#
--	# I tried compiling with DBM support and sure enough things locked up
--	# just as advertised. Checking into it, I found that the lockup was
--	# during the call to dbm_open. Not *in* dbm_open -- but between the call
--	# to and the jump into.
--	#
--	# To make a long story short, making sure that the *.a and *.sa pairs of
--	#   /usr/lib/lib{m,db,gdbm}.{a,sa}
--	# were perfectly in sync took care of it.
--	#
--	# This will generate a harmless Whoa There! message
--	case "$d_dbm_open" in
--	'')	cat <<'EOM' >&4
--
--Disabling ndbm.  This will generate a Whoa There message in Configure.
--Read hints/linux.sh for further information.
--EOM
--		# You can override this with Configure -Dd_dbm_open
--		d_dbm_open=undef
--		;;
--	esac
--fi
--
--rm -f try.c a.out
--
- if ${sh:-/bin/sh} -c exit; then
-   echo ''
-   echo 'You appear to have a working bash.  Good.'
-@@ -497,7 +441,7 @@ then
-        DBLIB="$DBDIR/libdb.so"
-        if [ -f $DBLIB ]
-        then
--         if ${nm:-nm} -u $DBLIB | grep pthread >/dev/null
-+         if ${nm:-nm} -u $DBLIB 2>/dev/null | grep pthread >/dev/null
-          then
-            if ldd $DBLIB | grep pthread >/dev/null
-            then
-diff --git a/pp.c b/pp.c
-index 4ec6887..729239c 100644
---- a/pp.c
-+++ b/pp.c
-@@ -3435,8 +3435,12 @@ PP(pp_crypt)
- #if defined(__GLIBC__) || defined(__EMX__)
- 	if (PL_reentrant_buffer->_crypt_struct_buffer) {
- 	    PL_reentrant_buffer->_crypt_struct_buffer->initialized = 0;
--	    /* work around glibc-2.2.5 bug */
-+#if (defined(__GLIBC__) && __GLIBC__ == 2) && \
-+    (defined(__GLIBC_MINOR__) && __GLIBC_MINOR__ >= 2 && __GLIBC_MINOR__ < 4)
-+	    /* work around glibc-2.2.5 bug, has been fixed at some
-+	     * time in glibc-2.3.X */
- 	    PL_reentrant_buffer->_crypt_struct_buffer->current_saltbits = 0;
-+#endif
- 	}
- #endif
-     }

5.020.003-main,quadmath,threaded-buster/Dockerfile

@@ -1,59 +0,0 @@
-FROM debian:buster-backports
-LABEL maintainer="Ryan Voots <simcop@cpan.org>"
-
-COPY *.patch /usr/src/perl/
-WORKDIR /usr/src/perl
-
-ENV DEBIAN_FRONTEND=noninteractive
-
-RUN perl -i.bak -pE '$x=$_; $x=~s|^deb |deb-src |g;$_.=$x' /etc/apt/sources.list \
-    && apt update \
-    && apt -yq full-upgrade \
-    && apt -yq build-dep perl \
-    &&     apt-get install -y --no-install-recommends \
-       bzip2 \
-       ca-certificates \
-       # cpio \
-       curl \
-       dpkg-dev \
-       # file \
-       gcc \
-       # g++ \
-       libbz2-dev \
-       libdb-dev \
-       libc6-dev \
-       libgdbm-dev \
-       liblzma-dev \
-       make \
-       netbase \
-       patch \
-       procps \
-       zlib1g-dev \
-       xz-utils \
-    && curl -SL https://www.cpan.org/src/5.0/perl-5.20.3.tar.bz2 -o perl-5.20.3.tar.bz2 \
-    && echo '1b40068166c242e34a536836286e70b78410602a80615143301e52aa2901493b *perl-5.20.3.tar.bz2' | sha256sum -c -
-RUN tar --strip-components=1 -xaf perl-5.20.3.tar.bz2 -C /usr/src/perl \
-    && rm perl-5.20.3.tar.bz2 \
-    && cat *.patch | patch -p1 \
-    && echo 'print "1..0 # Skipped: Tests are invalid"' > /usr/src/perl/ext/GDBM_File/t/fatal.t
-RUN gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)" \
-    && archBits="$(dpkg-architecture --query DEB_BUILD_ARCH_BITS)" \
-    && archFlag="$([ "$archBits" = '64' ] && echo '-Duse64bitall' || echo '-Duse64bitint')" \
-    && ./Configure -Darchname="$gnuArch" "$archFlag" -Dusequadmath -Dusethreads -Duseshrplib -Dvendorprefix=/usr/local -Aldflags='-Wl,-z,now -Wl,-zrelro -Wl,-z,noexecstack' -Accflags='-fpie -fPIC -fstack-protector-all -pie -D_FORTIFY_SOURCE=2' -Duseshrplib  -des \
-    && make -j$(nproc) \
-    && TEST_JOBS=$(nproc) make test_harness
-RUN make install \
-    && cd /usr/src \
-    && curl -LO https://www.cpan.org/authors/id/M/MI/MIYAGAWA/App-cpanminus-1.7044.tar.gz \
-    && echo '9b60767fe40752ef7a9d3f13f19060a63389a5c23acc3e9827e19b75500f81f3 *App-cpanminus-1.7044.tar.gz' | sha256sum -c - \
-    && tar -xzf App-cpanminus-1.7044.tar.gz && cd App-cpanminus-1.7044 && perl bin/cpanm . && cd /root \
-    && savedPackages="make netbase" \
-    && apt-mark auto '.*' > /dev/null \
-    && apt-mark manual $savedPackages \
-    && apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false \
-    && rm -fr /var/cache/apt/* /var/lib/apt/lists/* \
-    && rm -fr ./cpanm /root/.cpanm /usr/src/perl /usr/src/App-cpanminus-1.7044* /tmp/*
-
-WORKDIR /
-
-CMD ["perl5.20.3","-de0"]

5.020.003-main,quadmath,threaded-buster/fix-pack-longdouble.patch

@@ -1,41 +0,0 @@
-From a2db6c92fc2880ba1f288b6c4599a779997dd4e7 Mon Sep 17 00:00:00 2001
-From: Tony Cook <tony@develop-help.com>
-Date: Thu, 9 Apr 2015 15:45:16 +1000
-Subject: [PATCH] [perl #123971] fix long double pack padding on newer GCC
-
----
- pp_pack.c |   11 +++++++++++
- 1 file changed, 11 insertions(+)
-
-diff --git a/pp_pack.c b/pp_pack.c
-index 06adade..1d732a8 100644
---- a/pp_pack.c
-+++ b/pp_pack.c
-@@ -2709,6 +2709,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		anv.nv = sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(anv.bytes+10, sizeof(anv.bytes) - 10, U8);
-+#    endif
- #else
- 		anv.nv = SvNV(fromstr);
- #endif
-@@ -2726,6 +2732,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #  ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		aldouble.ld = (long double)sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(aldouble.bytes+10, sizeof(aldouble.bytes) - 10, U8);
-+#    endif
- #  else
- 		aldouble.ld = (long double)SvNV(fromstr);
- #  endif
--- 
-1.7.10.4
-
-

5.020.003-main,quadmath-bullseye/DevelPatchPerl.patch

@@ -1,281 +0,0 @@
-diff --git a/Configure b/Configure
-index 438b926..a762f78 100755
---- a/Configure
-+++ b/Configure
-@@ -4591,7 +4591,7 @@ else
- fi
- $rm -f try try.*
- case "$gccversion" in
--1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-+1.*) cpp=`./loc gcc-cpp $cpp $pth` ;;
- esac
- case "$gccversion" in
- '') gccosandvers='' ;;
-@@ -4631,7 +4631,7 @@ esac
- # gcc 3.* complain about adding -Idirectories that they already know about,
- # so we will take those off from locincpth.
- case "$gccversion" in
--3*)
-+3.*)
-     echo "main(){}">try.c
-     for incdir in $locincpth; do
-        warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
-@@ -5328,13 +5328,13 @@ fi
- case "$hint" in
- default|recommended)
- 	case "$gccversion" in
--	1*) dflt="$dflt -fpcc-struct-return" ;;
-+	1.*) dflt="$dflt -fpcc-struct-return" ;;
- 	esac
- 	case "$optimize:$DEBUGGING" in
- 	*-g*:old) dflt="$dflt -DDEBUGGING";;
- 	esac
- 	case "$gccversion" in
--	2*) if $test -d /etc/conf/kconfig.d &&
-+	2.*) if $test -d /etc/conf/kconfig.d &&
- 			$contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- 		then
- 			# Interactive Systems (ISC) POSIX mode.
-@@ -5343,7 +5343,7 @@ default|recommended)
- 		;;
- 	esac
- 	case "$gccversion" in
--	1*) ;;
-+	1.*) ;;
- 	2.[0-8]*) ;;
- 	?*)	set strict-aliasing -fno-strict-aliasing
- 		eval $checkccflag
-@@ -5445,7 +5445,7 @@ case "$cppflags" in
- *)  cppflags="$cppflags $ccflags" ;;
- esac
- case "$gccversion" in
--1*) cppflags="$cppflags -D__GNUC__"
-+1.*) cppflags="$cppflags -D__GNUC__"
- esac
- case "$mips_type" in
- '');;
-diff --git a/cpan/Time-Local/t/Local.t b/cpan/Time-Local/t/Local.t
-index 472e71a..0a852a0 100644
---- a/cpan/Time-Local/t/Local.t
-+++ b/cpan/Time-Local/t/Local.t
-@@ -91,7 +91,7 @@ for (@time, @neg_time) {
- 
-         # Test timelocal()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timelocal($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = localtime($time);
-@@ -107,7 +107,7 @@ for (@time, @neg_time) {
- 
-         # Test timegm()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timegm($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = gmtime($time);
-@@ -125,7 +125,6 @@ for (@time, @neg_time) {
- 
- for (@bad_time) {
-     my($year, $mon, $mday, $hour, $min, $sec) = @$_;
--    $year -= 1900;
-     $mon--;
- 
-     eval { timegm($sec,$min,$hour,$mday,$mon,$year) };
-@@ -134,14 +133,14 @@ for (@bad_time) {
- }
- 
- {
--    is(timelocal(0,0,1,1,0,90) - timelocal(0,0,0,1,0,90), 3600,
-+    is(timelocal(0,0,1,1,0,1990) - timelocal(0,0,0,1,0,1990), 3600,
-        'one hour difference between two calls to timelocal');
- 
--    is(timelocal(1,2,3,1,0,100) - timelocal(1,2,3,31,11,99), 24 * 3600,
-+    is(timelocal(1,2,3,1,0,2000) - timelocal(1,2,3,31,11,1999), 24 * 3600,
-        'one day difference between two calls to timelocal');
- 
-     # Diff beween Jan 1, 1980 and Mar 1, 1980 = (31 + 29 = 60 days)
--    is(timegm(0,0,0, 1, 2, 80) - timegm(0,0,0, 1, 0, 80), 60 * 24 * 3600,
-+    is(timegm(0,0,0, 1, 2, 1980) - timegm(0,0,0, 1, 0, 1980), 60 * 24 * 3600,
-        '60 day difference between two calls to timegm');
- }
- 
-diff --git a/hints/linux.sh b/hints/linux.sh
-index 956adfc..c749f0f 100644
---- a/hints/linux.sh
-+++ b/hints/linux.sh
-@@ -85,7 +85,7 @@ uname_minus_m="${uname_minus_m:-"$targetarch"}"
- 
- # Check if we're about to use Intel's ICC compiler
- case "`${cc:-cc} -V 2>&1`" in
--*"Intel(R) C++ Compiler"*|*"Intel(R) C Compiler"*)
-+*"Intel(R) C"*" Compiler"*)
-     # record the version, formats:
-     # icc (ICC) 10.1 20080801
-     # icpc (ICC) 10.1 20080801
-@@ -165,6 +165,9 @@ esac
- # plibpth to bypass this check.
- if [ -x /usr/bin/gcc ] ; then
-     gcc=/usr/bin/gcc
-+# clang also provides -print-search-dirs
-+elif ${cc:-cc} --version 2>/dev/null | grep -q '^clang ' ; then
-+    gcc=${cc:-cc}
- else
-     gcc=gcc
- fi
-@@ -178,6 +181,33 @@ case "$plibpth" in
-     ;;
- esac
- 
-+# For the musl libc, perl should #define _GNU_SOURCE.  Otherwise, some
-+# available functions, like memem, won't be used.  See the discussion in
-+# [perl #133760].  musl doesn't offer an easy way to identify it, but,
-+# at least on alpine linux, the ldd --version output contains the
-+# string 'musl.'
-+case `ldd --version 2>&1` in
-+    musl*)  ccflags="$ccflags -D_GNU_SOURCE" ;;
-+        *) ;;
-+esac
-+
-+# libquadmath is sometimes installed as gcc internal library,
-+# so contrary to our usual policy of *not* looking at gcc internal
-+# directories we now *do* look at them, in case they contain
-+# the quadmath library.
-+# XXX This may apply to other gcc internal libraries, if such exist.
-+# XXX This could be at Configure level, but then the $gcc is messy.
-+case "$usequadmath" in
-+"$define")
-+  for d in `LANG=C LC_ALL=C $gcc $ccflags $ldflags -print-search-dirs | grep libraries | cut -f2- -d= | tr ':' $trnl | grep 'gcc' | sed -e 's:/$::'`
-+  do
-+    case `ls $d/*libquadmath*$so* 2>/dev/null` in
-+    $d/*libquadmath*$so*) xlibpth="$xlibpth $d" ;;
-+    esac
-+  done
-+  ;;
-+esac
-+
- case "$libc" in
- '')
- # If you have glibc, then report the version for ./myconfig bug reporting.
-@@ -204,92 +234,6 @@ case "$libc" in
-     ;;
- esac
- 
--# Are we using ELF?  Thanks to Kenneth Albanowski <kjahds@kjahds.com>
--# for this test.
--cat >try.c <<'EOM'
--/* Test for whether ELF binaries are produced */
--#include <fcntl.h>
--#include <stdlib.h>
--#include <unistd.h>
--main() {
--	char buffer[4];
--	int i=open("a.out",O_RDONLY);
--	if(i==-1)
--		exit(1); /* fail */
--	if(read(i,&buffer[0],4)<4)
--		exit(1); /* fail */
--	if(buffer[0] != 127 || buffer[1] != 'E' ||
--           buffer[2] != 'L' || buffer[3] != 'F')
--		exit(1); /* fail */
--	exit(0); /* succeed (yes, it's ELF) */
--}
--EOM
--if ${cc:-gcc} $ccflags $ldflags try.c >/dev/null 2>&1 && $run ./a.out; then
--    cat <<'EOM' >&4
--
--You appear to have ELF support.  I'll try to use it for dynamic loading.
--If dynamic loading doesn't work, read hints/linux.sh for further information.
--EOM
--
--else
--    cat <<'EOM' >&4
--
--You don't have an ELF gcc.  I will use dld if possible.  If you are
--using a version of DLD earlier than 3.2.6, or don't have it at all, you
--should probably upgrade. If you are forced to use 3.2.4, you should
--uncomment a couple of lines in hints/linux.sh and restart Configure so
--that shared libraries will be disallowed.
--
--EOM
--    lddlflags="-r $lddlflags"
--    # These empty values are so that Configure doesn't put in the
--    # Linux ELF values.
--    ccdlflags=' '
--    cccdlflags=' '
--    ccflags="-DOVR_DBL_DIG=14 $ccflags"
--    so='sa'
--    dlext='o'
--    nm_so_opt=' '
--    ## If you are using DLD 3.2.4 which does not support shared libs,
--    ## uncomment the next two lines:
--    #ldflags="-static"
--    #so='none'
--
--	# In addition, on some systems there is a problem with perl and NDBM
--	# which causes AnyDBM and NDBM_File to lock up. This is evidenced
--	# in the tests as AnyDBM just freezing.  Apparently, this only
--	# happens on a.out systems, so we disable NDBM for all a.out linux
--	# systems.  If someone can suggest a more robust test
--	#  that would be appreciated.
--	#
--	# More info:
--	# Date: Wed, 7 Feb 1996 03:21:04 +0900
--	# From: Jeffrey Friedl <jfriedl@nff.ncl.omron.co.jp>
--	#
--	# I tried compiling with DBM support and sure enough things locked up
--	# just as advertised. Checking into it, I found that the lockup was
--	# during the call to dbm_open. Not *in* dbm_open -- but between the call
--	# to and the jump into.
--	#
--	# To make a long story short, making sure that the *.a and *.sa pairs of
--	#   /usr/lib/lib{m,db,gdbm}.{a,sa}
--	# were perfectly in sync took care of it.
--	#
--	# This will generate a harmless Whoa There! message
--	case "$d_dbm_open" in
--	'')	cat <<'EOM' >&4
--
--Disabling ndbm.  This will generate a Whoa There message in Configure.
--Read hints/linux.sh for further information.
--EOM
--		# You can override this with Configure -Dd_dbm_open
--		d_dbm_open=undef
--		;;
--	esac
--fi
--
--rm -f try.c a.out
--
- if ${sh:-/bin/sh} -c exit; then
-   echo ''
-   echo 'You appear to have a working bash.  Good.'
-@@ -497,7 +441,7 @@ then
-        DBLIB="$DBDIR/libdb.so"
-        if [ -f $DBLIB ]
-        then
--         if ${nm:-nm} -u $DBLIB | grep pthread >/dev/null
-+         if ${nm:-nm} -u $DBLIB 2>/dev/null | grep pthread >/dev/null
-          then
-            if ldd $DBLIB | grep pthread >/dev/null
-            then
-diff --git a/pp.c b/pp.c
-index 4ec6887..729239c 100644
---- a/pp.c
-+++ b/pp.c
-@@ -3435,8 +3435,12 @@ PP(pp_crypt)
- #if defined(__GLIBC__) || defined(__EMX__)
- 	if (PL_reentrant_buffer->_crypt_struct_buffer) {
- 	    PL_reentrant_buffer->_crypt_struct_buffer->initialized = 0;
--	    /* work around glibc-2.2.5 bug */
-+#if (defined(__GLIBC__) && __GLIBC__ == 2) && \
-+    (defined(__GLIBC_MINOR__) && __GLIBC_MINOR__ >= 2 && __GLIBC_MINOR__ < 4)
-+	    /* work around glibc-2.2.5 bug, has been fixed at some
-+	     * time in glibc-2.3.X */
- 	    PL_reentrant_buffer->_crypt_struct_buffer->current_saltbits = 0;
-+#endif
- 	}
- #endif
-     }

5.020.003-main,quadmath-bullseye/Dockerfile

@@ -1,59 +0,0 @@
-FROM debian:bullseye-backports
-LABEL maintainer="Ryan Voots <simcop@cpan.org>"
-
-COPY *.patch /usr/src/perl/
-WORKDIR /usr/src/perl
-
-ENV DEBIAN_FRONTEND=noninteractive
-
-RUN perl -i.bak -pE '$x=$_; $x=~s|^deb |deb-src |g;$_.=$x' /etc/apt/sources.list \
-    && apt update \
-    && apt -yq full-upgrade \
-    && apt -yq build-dep perl \
-    &&     apt-get install -y --no-install-recommends \
-       bzip2 \
-       ca-certificates \
-       # cpio \
-       curl \
-       dpkg-dev \
-       # file \
-       gcc \
-       # g++ \
-       libbz2-dev \
-       libdb-dev \
-       libc6-dev \
-       libgdbm-dev \
-       liblzma-dev \
-       make \
-       netbase \
-       patch \
-       procps \
-       zlib1g-dev \
-       xz-utils \
-    && curl -SL https://www.cpan.org/src/5.0/perl-5.20.3.tar.bz2 -o perl-5.20.3.tar.bz2 \
-    && echo '1b40068166c242e34a536836286e70b78410602a80615143301e52aa2901493b *perl-5.20.3.tar.bz2' | sha256sum -c -
-RUN tar --strip-components=1 -xaf perl-5.20.3.tar.bz2 -C /usr/src/perl \
-    && rm perl-5.20.3.tar.bz2 \
-    && cat *.patch | patch -p1 \
-    && echo 'print "1..0 # Skipped: Tests are invalid"' > /usr/src/perl/ext/GDBM_File/t/fatal.t
-RUN gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)" \
-    && archBits="$(dpkg-architecture --query DEB_BUILD_ARCH_BITS)" \
-    && archFlag="$([ "$archBits" = '64' ] && echo '-Duse64bitall' || echo '-Duse64bitint')" \
-    && ./Configure -Darchname="$gnuArch" "$archFlag" -Dusequadmath -Duseshrplib -Dvendorprefix=/usr/local -Aldflags='-Wl,-z,now -Wl,-zrelro -Wl,-z,noexecstack' -Accflags='-fpie -fPIC -fstack-protector-all -pie -D_FORTIFY_SOURCE=2' -Duseshrplib  -des \
-    && make -j$(nproc) \
-    && TEST_JOBS=$(nproc) make test_harness
-RUN make install \
-    && cd /usr/src \
-    && curl -LO https://www.cpan.org/authors/id/M/MI/MIYAGAWA/App-cpanminus-1.7044.tar.gz \
-    && echo '9b60767fe40752ef7a9d3f13f19060a63389a5c23acc3e9827e19b75500f81f3 *App-cpanminus-1.7044.tar.gz' | sha256sum -c - \
-    && tar -xzf App-cpanminus-1.7044.tar.gz && cd App-cpanminus-1.7044 && perl bin/cpanm . && cd /root \
-    && savedPackages="make netbase" \
-    && apt-mark auto '.*' > /dev/null \
-    && apt-mark manual $savedPackages \
-    && apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false \
-    && rm -fr /var/cache/apt/* /var/lib/apt/lists/* \
-    && rm -fr ./cpanm /root/.cpanm /usr/src/perl /usr/src/App-cpanminus-1.7044* /tmp/*
-
-WORKDIR /
-
-CMD ["perl5.20.3","-de0"]

5.020.003-main,quadmath-bullseye/fix-pack-longdouble.patch

@@ -1,41 +0,0 @@
-From a2db6c92fc2880ba1f288b6c4599a779997dd4e7 Mon Sep 17 00:00:00 2001
-From: Tony Cook <tony@develop-help.com>
-Date: Thu, 9 Apr 2015 15:45:16 +1000
-Subject: [PATCH] [perl #123971] fix long double pack padding on newer GCC
-
----
- pp_pack.c |   11 +++++++++++
- 1 file changed, 11 insertions(+)
-
-diff --git a/pp_pack.c b/pp_pack.c
-index 06adade..1d732a8 100644
---- a/pp_pack.c
-+++ b/pp_pack.c
-@@ -2709,6 +2709,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		anv.nv = sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(anv.bytes+10, sizeof(anv.bytes) - 10, U8);
-+#    endif
- #else
- 		anv.nv = SvNV(fromstr);
- #endif
-@@ -2726,6 +2732,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #  ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		aldouble.ld = (long double)sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(aldouble.bytes+10, sizeof(aldouble.bytes) - 10, U8);
-+#    endif
- #  else
- 		aldouble.ld = (long double)SvNV(fromstr);
- #  endif
--- 
-1.7.10.4
-
-

5.020.003-main,quadmath-buster/DevelPatchPerl.patch

@@ -1,281 +0,0 @@
-diff --git a/Configure b/Configure
-index 438b926..a762f78 100755
---- a/Configure
-+++ b/Configure
-@@ -4591,7 +4591,7 @@ else
- fi
- $rm -f try try.*
- case "$gccversion" in
--1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-+1.*) cpp=`./loc gcc-cpp $cpp $pth` ;;
- esac
- case "$gccversion" in
- '') gccosandvers='' ;;
-@@ -4631,7 +4631,7 @@ esac
- # gcc 3.* complain about adding -Idirectories that they already know about,
- # so we will take those off from locincpth.
- case "$gccversion" in
--3*)
-+3.*)
-     echo "main(){}">try.c
-     for incdir in $locincpth; do
-        warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
-@@ -5328,13 +5328,13 @@ fi
- case "$hint" in
- default|recommended)
- 	case "$gccversion" in
--	1*) dflt="$dflt -fpcc-struct-return" ;;
-+	1.*) dflt="$dflt -fpcc-struct-return" ;;
- 	esac
- 	case "$optimize:$DEBUGGING" in
- 	*-g*:old) dflt="$dflt -DDEBUGGING";;
- 	esac
- 	case "$gccversion" in
--	2*) if $test -d /etc/conf/kconfig.d &&
-+	2.*) if $test -d /etc/conf/kconfig.d &&
- 			$contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- 		then
- 			# Interactive Systems (ISC) POSIX mode.
-@@ -5343,7 +5343,7 @@ default|recommended)
- 		;;
- 	esac
- 	case "$gccversion" in
--	1*) ;;
-+	1.*) ;;
- 	2.[0-8]*) ;;
- 	?*)	set strict-aliasing -fno-strict-aliasing
- 		eval $checkccflag
-@@ -5445,7 +5445,7 @@ case "$cppflags" in
- *)  cppflags="$cppflags $ccflags" ;;
- esac
- case "$gccversion" in
--1*) cppflags="$cppflags -D__GNUC__"
-+1.*) cppflags="$cppflags -D__GNUC__"
- esac
- case "$mips_type" in
- '');;
-diff --git a/cpan/Time-Local/t/Local.t b/cpan/Time-Local/t/Local.t
-index 472e71a..0a852a0 100644
---- a/cpan/Time-Local/t/Local.t
-+++ b/cpan/Time-Local/t/Local.t
-@@ -91,7 +91,7 @@ for (@time, @neg_time) {
- 
-         # Test timelocal()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timelocal($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = localtime($time);
-@@ -107,7 +107,7 @@ for (@time, @neg_time) {
- 
-         # Test timegm()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timegm($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = gmtime($time);
-@@ -125,7 +125,6 @@ for (@time, @neg_time) {
- 
- for (@bad_time) {
-     my($year, $mon, $mday, $hour, $min, $sec) = @$_;
--    $year -= 1900;
-     $mon--;
- 
-     eval { timegm($sec,$min,$hour,$mday,$mon,$year) };
-@@ -134,14 +133,14 @@ for (@bad_time) {
- }
- 
- {
--    is(timelocal(0,0,1,1,0,90) - timelocal(0,0,0,1,0,90), 3600,
-+    is(timelocal(0,0,1,1,0,1990) - timelocal(0,0,0,1,0,1990), 3600,
-        'one hour difference between two calls to timelocal');
- 
--    is(timelocal(1,2,3,1,0,100) - timelocal(1,2,3,31,11,99), 24 * 3600,
-+    is(timelocal(1,2,3,1,0,2000) - timelocal(1,2,3,31,11,1999), 24 * 3600,
-        'one day difference between two calls to timelocal');
- 
-     # Diff beween Jan 1, 1980 and Mar 1, 1980 = (31 + 29 = 60 days)
--    is(timegm(0,0,0, 1, 2, 80) - timegm(0,0,0, 1, 0, 80), 60 * 24 * 3600,
-+    is(timegm(0,0,0, 1, 2, 1980) - timegm(0,0,0, 1, 0, 1980), 60 * 24 * 3600,
-        '60 day difference between two calls to timegm');
- }
- 
-diff --git a/hints/linux.sh b/hints/linux.sh
-index 956adfc..c749f0f 100644
---- a/hints/linux.sh
-+++ b/hints/linux.sh
-@@ -85,7 +85,7 @@ uname_minus_m="${uname_minus_m:-"$targetarch"}"
- 
- # Check if we're about to use Intel's ICC compiler
- case "`${cc:-cc} -V 2>&1`" in
--*"Intel(R) C++ Compiler"*|*"Intel(R) C Compiler"*)
-+*"Intel(R) C"*" Compiler"*)
-     # record the version, formats:
-     # icc (ICC) 10.1 20080801
-     # icpc (ICC) 10.1 20080801
-@@ -165,6 +165,9 @@ esac
- # plibpth to bypass this check.
- if [ -x /usr/bin/gcc ] ; then
-     gcc=/usr/bin/gcc
-+# clang also provides -print-search-dirs
-+elif ${cc:-cc} --version 2>/dev/null | grep -q '^clang ' ; then
-+    gcc=${cc:-cc}
- else
-     gcc=gcc
- fi
-@@ -178,6 +181,33 @@ case "$plibpth" in
-     ;;
- esac
- 
-+# For the musl libc, perl should #define _GNU_SOURCE.  Otherwise, some
-+# available functions, like memem, won't be used.  See the discussion in
-+# [perl #133760].  musl doesn't offer an easy way to identify it, but,
-+# at least on alpine linux, the ldd --version output contains the
-+# string 'musl.'
-+case `ldd --version 2>&1` in
-+    musl*)  ccflags="$ccflags -D_GNU_SOURCE" ;;
-+        *) ;;
-+esac
-+
-+# libquadmath is sometimes installed as gcc internal library,
-+# so contrary to our usual policy of *not* looking at gcc internal
-+# directories we now *do* look at them, in case they contain
-+# the quadmath library.
-+# XXX This may apply to other gcc internal libraries, if such exist.
-+# XXX This could be at Configure level, but then the $gcc is messy.
-+case "$usequadmath" in
-+"$define")
-+  for d in `LANG=C LC_ALL=C $gcc $ccflags $ldflags -print-search-dirs | grep libraries | cut -f2- -d= | tr ':' $trnl | grep 'gcc' | sed -e 's:/$::'`
-+  do
-+    case `ls $d/*libquadmath*$so* 2>/dev/null` in
-+    $d/*libquadmath*$so*) xlibpth="$xlibpth $d" ;;
-+    esac
-+  done
-+  ;;
-+esac
-+
- case "$libc" in
- '')
- # If you have glibc, then report the version for ./myconfig bug reporting.
-@@ -204,92 +234,6 @@ case "$libc" in
-     ;;
- esac
- 
--# Are we using ELF?  Thanks to Kenneth Albanowski <kjahds@kjahds.com>
--# for this test.
--cat >try.c <<'EOM'
--/* Test for whether ELF binaries are produced */
--#include <fcntl.h>
--#include <stdlib.h>
--#include <unistd.h>
--main() {
--	char buffer[4];
--	int i=open("a.out",O_RDONLY);
--	if(i==-1)
--		exit(1); /* fail */
--	if(read(i,&buffer[0],4)<4)
--		exit(1); /* fail */
--	if(buffer[0] != 127 || buffer[1] != 'E' ||
--           buffer[2] != 'L' || buffer[3] != 'F')
--		exit(1); /* fail */
--	exit(0); /* succeed (yes, it's ELF) */
--}
--EOM
--if ${cc:-gcc} $ccflags $ldflags try.c >/dev/null 2>&1 && $run ./a.out; then
--    cat <<'EOM' >&4
--
--You appear to have ELF support.  I'll try to use it for dynamic loading.
--If dynamic loading doesn't work, read hints/linux.sh for further information.
--EOM
--
--else
--    cat <<'EOM' >&4
--
--You don't have an ELF gcc.  I will use dld if possible.  If you are
--using a version of DLD earlier than 3.2.6, or don't have it at all, you
--should probably upgrade. If you are forced to use 3.2.4, you should
--uncomment a couple of lines in hints/linux.sh and restart Configure so
--that shared libraries will be disallowed.
--
--EOM
--    lddlflags="-r $lddlflags"
--    # These empty values are so that Configure doesn't put in the
--    # Linux ELF values.
--    ccdlflags=' '
--    cccdlflags=' '
--    ccflags="-DOVR_DBL_DIG=14 $ccflags"
--    so='sa'
--    dlext='o'
--    nm_so_opt=' '
--    ## If you are using DLD 3.2.4 which does not support shared libs,
--    ## uncomment the next two lines:
--    #ldflags="-static"
--    #so='none'
--
--	# In addition, on some systems there is a problem with perl and NDBM
--	# which causes AnyDBM and NDBM_File to lock up. This is evidenced
--	# in the tests as AnyDBM just freezing.  Apparently, this only
--	# happens on a.out systems, so we disable NDBM for all a.out linux
--	# systems.  If someone can suggest a more robust test
--	#  that would be appreciated.
--	#
--	# More info:
--	# Date: Wed, 7 Feb 1996 03:21:04 +0900
--	# From: Jeffrey Friedl <jfriedl@nff.ncl.omron.co.jp>
--	#
--	# I tried compiling with DBM support and sure enough things locked up
--	# just as advertised. Checking into it, I found that the lockup was
--	# during the call to dbm_open. Not *in* dbm_open -- but between the call
--	# to and the jump into.
--	#
--	# To make a long story short, making sure that the *.a and *.sa pairs of
--	#   /usr/lib/lib{m,db,gdbm}.{a,sa}
--	# were perfectly in sync took care of it.
--	#
--	# This will generate a harmless Whoa There! message
--	case "$d_dbm_open" in
--	'')	cat <<'EOM' >&4
--
--Disabling ndbm.  This will generate a Whoa There message in Configure.
--Read hints/linux.sh for further information.
--EOM
--		# You can override this with Configure -Dd_dbm_open
--		d_dbm_open=undef
--		;;
--	esac
--fi
--
--rm -f try.c a.out
--
- if ${sh:-/bin/sh} -c exit; then
-   echo ''
-   echo 'You appear to have a working bash.  Good.'
-@@ -497,7 +441,7 @@ then
-        DBLIB="$DBDIR/libdb.so"
-        if [ -f $DBLIB ]
-        then
--         if ${nm:-nm} -u $DBLIB | grep pthread >/dev/null
-+         if ${nm:-nm} -u $DBLIB 2>/dev/null | grep pthread >/dev/null
-          then
-            if ldd $DBLIB | grep pthread >/dev/null
-            then
-diff --git a/pp.c b/pp.c
-index 4ec6887..729239c 100644
---- a/pp.c
-+++ b/pp.c
-@@ -3435,8 +3435,12 @@ PP(pp_crypt)
- #if defined(__GLIBC__) || defined(__EMX__)
- 	if (PL_reentrant_buffer->_crypt_struct_buffer) {
- 	    PL_reentrant_buffer->_crypt_struct_buffer->initialized = 0;
--	    /* work around glibc-2.2.5 bug */
-+#if (defined(__GLIBC__) && __GLIBC__ == 2) && \
-+    (defined(__GLIBC_MINOR__) && __GLIBC_MINOR__ >= 2 && __GLIBC_MINOR__ < 4)
-+	    /* work around glibc-2.2.5 bug, has been fixed at some
-+	     * time in glibc-2.3.X */
- 	    PL_reentrant_buffer->_crypt_struct_buffer->current_saltbits = 0;
-+#endif
- 	}
- #endif
-     }

5.020.003-main,quadmath-buster/Dockerfile

@@ -1,59 +0,0 @@
-FROM debian:buster-backports
-LABEL maintainer="Ryan Voots <simcop@cpan.org>"
-
-COPY *.patch /usr/src/perl/
-WORKDIR /usr/src/perl
-
-ENV DEBIAN_FRONTEND=noninteractive
-
-RUN perl -i.bak -pE '$x=$_; $x=~s|^deb |deb-src |g;$_.=$x' /etc/apt/sources.list \
-    && apt update \
-    && apt -yq full-upgrade \
-    && apt -yq build-dep perl \
-    &&     apt-get install -y --no-install-recommends \
-       bzip2 \
-       ca-certificates \
-       # cpio \
-       curl \
-       dpkg-dev \
-       # file \
-       gcc \
-       # g++ \
-       libbz2-dev \
-       libdb-dev \
-       libc6-dev \
-       libgdbm-dev \
-       liblzma-dev \
-       make \
-       netbase \
-       patch \
-       procps \
-       zlib1g-dev \
-       xz-utils \
-    && curl -SL https://www.cpan.org/src/5.0/perl-5.20.3.tar.bz2 -o perl-5.20.3.tar.bz2 \
-    && echo '1b40068166c242e34a536836286e70b78410602a80615143301e52aa2901493b *perl-5.20.3.tar.bz2' | sha256sum -c -
-RUN tar --strip-components=1 -xaf perl-5.20.3.tar.bz2 -C /usr/src/perl \
-    && rm perl-5.20.3.tar.bz2 \
-    && cat *.patch | patch -p1 \
-    && echo 'print "1..0 # Skipped: Tests are invalid"' > /usr/src/perl/ext/GDBM_File/t/fatal.t
-RUN gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)" \
-    && archBits="$(dpkg-architecture --query DEB_BUILD_ARCH_BITS)" \
-    && archFlag="$([ "$archBits" = '64' ] && echo '-Duse64bitall' || echo '-Duse64bitint')" \
-    && ./Configure -Darchname="$gnuArch" "$archFlag" -Dusequadmath -Duseshrplib -Dvendorprefix=/usr/local -Aldflags='-Wl,-z,now -Wl,-zrelro -Wl,-z,noexecstack' -Accflags='-fpie -fPIC -fstack-protector-all -pie -D_FORTIFY_SOURCE=2' -Duseshrplib  -des \
-    && make -j$(nproc) \
-    && TEST_JOBS=$(nproc) make test_harness
-RUN make install \
-    && cd /usr/src \
-    && curl -LO https://www.cpan.org/authors/id/M/MI/MIYAGAWA/App-cpanminus-1.7044.tar.gz \
-    && echo '9b60767fe40752ef7a9d3f13f19060a63389a5c23acc3e9827e19b75500f81f3 *App-cpanminus-1.7044.tar.gz' | sha256sum -c - \
-    && tar -xzf App-cpanminus-1.7044.tar.gz && cd App-cpanminus-1.7044 && perl bin/cpanm . && cd /root \
-    && savedPackages="make netbase" \
-    && apt-mark auto '.*' > /dev/null \
-    && apt-mark manual $savedPackages \
-    && apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false \
-    && rm -fr /var/cache/apt/* /var/lib/apt/lists/* \
-    && rm -fr ./cpanm /root/.cpanm /usr/src/perl /usr/src/App-cpanminus-1.7044* /tmp/*
-
-WORKDIR /
-
-CMD ["perl5.20.3","-de0"]

5.020.003-main,quadmath-buster/fix-pack-longdouble.patch

@@ -1,41 +0,0 @@
-From a2db6c92fc2880ba1f288b6c4599a779997dd4e7 Mon Sep 17 00:00:00 2001
-From: Tony Cook <tony@develop-help.com>
-Date: Thu, 9 Apr 2015 15:45:16 +1000
-Subject: [PATCH] [perl #123971] fix long double pack padding on newer GCC
-
----
- pp_pack.c |   11 +++++++++++
- 1 file changed, 11 insertions(+)
-
-diff --git a/pp_pack.c b/pp_pack.c
-index 06adade..1d732a8 100644
---- a/pp_pack.c
-+++ b/pp_pack.c
-@@ -2709,6 +2709,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		anv.nv = sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(anv.bytes+10, sizeof(anv.bytes) - 10, U8);
-+#    endif
- #else
- 		anv.nv = SvNV(fromstr);
- #endif
-@@ -2726,6 +2732,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #  ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		aldouble.ld = (long double)sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(aldouble.bytes+10, sizeof(aldouble.bytes) - 10, U8);
-+#    endif
- #  else
- 		aldouble.ld = (long double)SvNV(fromstr);
- #  endif
--- 
-1.7.10.4
-
-

5.020.003-main,threaded-bullseye/DevelPatchPerl.patch

@@ -1,281 +0,0 @@
-diff --git a/Configure b/Configure
-index 438b926..a762f78 100755
---- a/Configure
-+++ b/Configure
-@@ -4591,7 +4591,7 @@ else
- fi
- $rm -f try try.*
- case "$gccversion" in
--1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-+1.*) cpp=`./loc gcc-cpp $cpp $pth` ;;
- esac
- case "$gccversion" in
- '') gccosandvers='' ;;
-@@ -4631,7 +4631,7 @@ esac
- # gcc 3.* complain about adding -Idirectories that they already know about,
- # so we will take those off from locincpth.
- case "$gccversion" in
--3*)
-+3.*)
-     echo "main(){}">try.c
-     for incdir in $locincpth; do
-        warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
-@@ -5328,13 +5328,13 @@ fi
- case "$hint" in
- default|recommended)
- 	case "$gccversion" in
--	1*) dflt="$dflt -fpcc-struct-return" ;;
-+	1.*) dflt="$dflt -fpcc-struct-return" ;;
- 	esac
- 	case "$optimize:$DEBUGGING" in
- 	*-g*:old) dflt="$dflt -DDEBUGGING";;
- 	esac
- 	case "$gccversion" in
--	2*) if $test -d /etc/conf/kconfig.d &&
-+	2.*) if $test -d /etc/conf/kconfig.d &&
- 			$contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- 		then
- 			# Interactive Systems (ISC) POSIX mode.
-@@ -5343,7 +5343,7 @@ default|recommended)
- 		;;
- 	esac
- 	case "$gccversion" in
--	1*) ;;
-+	1.*) ;;
- 	2.[0-8]*) ;;
- 	?*)	set strict-aliasing -fno-strict-aliasing
- 		eval $checkccflag
-@@ -5445,7 +5445,7 @@ case "$cppflags" in
- *)  cppflags="$cppflags $ccflags" ;;
- esac
- case "$gccversion" in
--1*) cppflags="$cppflags -D__GNUC__"
-+1.*) cppflags="$cppflags -D__GNUC__"
- esac
- case "$mips_type" in
- '');;
-diff --git a/cpan/Time-Local/t/Local.t b/cpan/Time-Local/t/Local.t
-index 472e71a..0a852a0 100644
---- a/cpan/Time-Local/t/Local.t
-+++ b/cpan/Time-Local/t/Local.t
-@@ -91,7 +91,7 @@ for (@time, @neg_time) {
- 
-         # Test timelocal()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timelocal($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = localtime($time);
-@@ -107,7 +107,7 @@ for (@time, @neg_time) {
- 
-         # Test timegm()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timegm($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = gmtime($time);
-@@ -125,7 +125,6 @@ for (@time, @neg_time) {
- 
- for (@bad_time) {
-     my($year, $mon, $mday, $hour, $min, $sec) = @$_;
--    $year -= 1900;
-     $mon--;
- 
-     eval { timegm($sec,$min,$hour,$mday,$mon,$year) };
-@@ -134,14 +133,14 @@ for (@bad_time) {
- }
- 
- {
--    is(timelocal(0,0,1,1,0,90) - timelocal(0,0,0,1,0,90), 3600,
-+    is(timelocal(0,0,1,1,0,1990) - timelocal(0,0,0,1,0,1990), 3600,
-        'one hour difference between two calls to timelocal');
- 
--    is(timelocal(1,2,3,1,0,100) - timelocal(1,2,3,31,11,99), 24 * 3600,
-+    is(timelocal(1,2,3,1,0,2000) - timelocal(1,2,3,31,11,1999), 24 * 3600,
-        'one day difference between two calls to timelocal');
- 
-     # Diff beween Jan 1, 1980 and Mar 1, 1980 = (31 + 29 = 60 days)
--    is(timegm(0,0,0, 1, 2, 80) - timegm(0,0,0, 1, 0, 80), 60 * 24 * 3600,
-+    is(timegm(0,0,0, 1, 2, 1980) - timegm(0,0,0, 1, 0, 1980), 60 * 24 * 3600,
-        '60 day difference between two calls to timegm');
- }
- 
-diff --git a/hints/linux.sh b/hints/linux.sh
-index 956adfc..c749f0f 100644
---- a/hints/linux.sh
-+++ b/hints/linux.sh
-@@ -85,7 +85,7 @@ uname_minus_m="${uname_minus_m:-"$targetarch"}"
- 
- # Check if we're about to use Intel's ICC compiler
- case "`${cc:-cc} -V 2>&1`" in
--*"Intel(R) C++ Compiler"*|*"Intel(R) C Compiler"*)
-+*"Intel(R) C"*" Compiler"*)
-     # record the version, formats:
-     # icc (ICC) 10.1 20080801
-     # icpc (ICC) 10.1 20080801
-@@ -165,6 +165,9 @@ esac
- # plibpth to bypass this check.
- if [ -x /usr/bin/gcc ] ; then
-     gcc=/usr/bin/gcc
-+# clang also provides -print-search-dirs
-+elif ${cc:-cc} --version 2>/dev/null | grep -q '^clang ' ; then
-+    gcc=${cc:-cc}
- else
-     gcc=gcc
- fi
-@@ -178,6 +181,33 @@ case "$plibpth" in
-     ;;
- esac
- 
-+# For the musl libc, perl should #define _GNU_SOURCE.  Otherwise, some
-+# available functions, like memem, won't be used.  See the discussion in
-+# [perl #133760].  musl doesn't offer an easy way to identify it, but,
-+# at least on alpine linux, the ldd --version output contains the
-+# string 'musl.'
-+case `ldd --version 2>&1` in
-+    musl*)  ccflags="$ccflags -D_GNU_SOURCE" ;;
-+        *) ;;
-+esac
-+
-+# libquadmath is sometimes installed as gcc internal library,
-+# so contrary to our usual policy of *not* looking at gcc internal
-+# directories we now *do* look at them, in case they contain
-+# the quadmath library.
-+# XXX This may apply to other gcc internal libraries, if such exist.
-+# XXX This could be at Configure level, but then the $gcc is messy.
-+case "$usequadmath" in
-+"$define")
-+  for d in `LANG=C LC_ALL=C $gcc $ccflags $ldflags -print-search-dirs | grep libraries | cut -f2- -d= | tr ':' $trnl | grep 'gcc' | sed -e 's:/$::'`
-+  do
-+    case `ls $d/*libquadmath*$so* 2>/dev/null` in
-+    $d/*libquadmath*$so*) xlibpth="$xlibpth $d" ;;
-+    esac
-+  done
-+  ;;
-+esac
-+
- case "$libc" in
- '')
- # If you have glibc, then report the version for ./myconfig bug reporting.
-@@ -204,92 +234,6 @@ case "$libc" in
-     ;;
- esac
- 
--# Are we using ELF?  Thanks to Kenneth Albanowski <kjahds@kjahds.com>
--# for this test.
--cat >try.c <<'EOM'
--/* Test for whether ELF binaries are produced */
--#include <fcntl.h>
--#include <stdlib.h>
--#include <unistd.h>
--main() {
--	char buffer[4];
--	int i=open("a.out",O_RDONLY);
--	if(i==-1)
--		exit(1); /* fail */
--	if(read(i,&buffer[0],4)<4)
--		exit(1); /* fail */
--	if(buffer[0] != 127 || buffer[1] != 'E' ||
--           buffer[2] != 'L' || buffer[3] != 'F')
--		exit(1); /* fail */
--	exit(0); /* succeed (yes, it's ELF) */
--}
--EOM
--if ${cc:-gcc} $ccflags $ldflags try.c >/dev/null 2>&1 && $run ./a.out; then
--    cat <<'EOM' >&4
--
--You appear to have ELF support.  I'll try to use it for dynamic loading.
--If dynamic loading doesn't work, read hints/linux.sh for further information.
--EOM
--
--else
--    cat <<'EOM' >&4
--
--You don't have an ELF gcc.  I will use dld if possible.  If you are
--using a version of DLD earlier than 3.2.6, or don't have it at all, you
--should probably upgrade. If you are forced to use 3.2.4, you should
--uncomment a couple of lines in hints/linux.sh and restart Configure so
--that shared libraries will be disallowed.
--
--EOM
--    lddlflags="-r $lddlflags"
--    # These empty values are so that Configure doesn't put in the
--    # Linux ELF values.
--    ccdlflags=' '
--    cccdlflags=' '
--    ccflags="-DOVR_DBL_DIG=14 $ccflags"
--    so='sa'
--    dlext='o'
--    nm_so_opt=' '
--    ## If you are using DLD 3.2.4 which does not support shared libs,
--    ## uncomment the next two lines:
--    #ldflags="-static"
--    #so='none'
--
--	# In addition, on some systems there is a problem with perl and NDBM
--	# which causes AnyDBM and NDBM_File to lock up. This is evidenced
--	# in the tests as AnyDBM just freezing.  Apparently, this only
--	# happens on a.out systems, so we disable NDBM for all a.out linux
--	# systems.  If someone can suggest a more robust test
--	#  that would be appreciated.
--	#
--	# More info:
--	# Date: Wed, 7 Feb 1996 03:21:04 +0900
--	# From: Jeffrey Friedl <jfriedl@nff.ncl.omron.co.jp>
--	#
--	# I tried compiling with DBM support and sure enough things locked up
--	# just as advertised. Checking into it, I found that the lockup was
--	# during the call to dbm_open. Not *in* dbm_open -- but between the call
--	# to and the jump into.
--	#
--	# To make a long story short, making sure that the *.a and *.sa pairs of
--	#   /usr/lib/lib{m,db,gdbm}.{a,sa}
--	# were perfectly in sync took care of it.
--	#
--	# This will generate a harmless Whoa There! message
--	case "$d_dbm_open" in
--	'')	cat <<'EOM' >&4
--
--Disabling ndbm.  This will generate a Whoa There message in Configure.
--Read hints/linux.sh for further information.
--EOM
--		# You can override this with Configure -Dd_dbm_open
--		d_dbm_open=undef
--		;;
--	esac
--fi
--
--rm -f try.c a.out
--
- if ${sh:-/bin/sh} -c exit; then
-   echo ''
-   echo 'You appear to have a working bash.  Good.'
-@@ -497,7 +441,7 @@ then
-        DBLIB="$DBDIR/libdb.so"
-        if [ -f $DBLIB ]
-        then
--         if ${nm:-nm} -u $DBLIB | grep pthread >/dev/null
-+         if ${nm:-nm} -u $DBLIB 2>/dev/null | grep pthread >/dev/null
-          then
-            if ldd $DBLIB | grep pthread >/dev/null
-            then
-diff --git a/pp.c b/pp.c
-index 4ec6887..729239c 100644
---- a/pp.c
-+++ b/pp.c
-@@ -3435,8 +3435,12 @@ PP(pp_crypt)
- #if defined(__GLIBC__) || defined(__EMX__)
- 	if (PL_reentrant_buffer->_crypt_struct_buffer) {
- 	    PL_reentrant_buffer->_crypt_struct_buffer->initialized = 0;
--	    /* work around glibc-2.2.5 bug */
-+#if (defined(__GLIBC__) && __GLIBC__ == 2) && \
-+    (defined(__GLIBC_MINOR__) && __GLIBC_MINOR__ >= 2 && __GLIBC_MINOR__ < 4)
-+	    /* work around glibc-2.2.5 bug, has been fixed at some
-+	     * time in glibc-2.3.X */
- 	    PL_reentrant_buffer->_crypt_struct_buffer->current_saltbits = 0;
-+#endif
- 	}
- #endif
-     }

5.020.003-main,threaded-bullseye/Dockerfile

@@ -1,59 +0,0 @@
-FROM debian:bullseye-backports
-LABEL maintainer="Ryan Voots <simcop@cpan.org>"
-
-COPY *.patch /usr/src/perl/
-WORKDIR /usr/src/perl
-
-ENV DEBIAN_FRONTEND=noninteractive
-
-RUN perl -i.bak -pE '$x=$_; $x=~s|^deb |deb-src |g;$_.=$x' /etc/apt/sources.list \
-    && apt update \
-    && apt -yq full-upgrade \
-    && apt -yq build-dep perl \
-    &&     apt-get install -y --no-install-recommends \
-       bzip2 \
-       ca-certificates \
-       # cpio \
-       curl \
-       dpkg-dev \
-       # file \
-       gcc \
-       # g++ \
-       libbz2-dev \
-       libdb-dev \
-       libc6-dev \
-       libgdbm-dev \
-       liblzma-dev \
-       make \
-       netbase \
-       patch \
-       procps \
-       zlib1g-dev \
-       xz-utils \
-    && curl -SL https://www.cpan.org/src/5.0/perl-5.20.3.tar.bz2 -o perl-5.20.3.tar.bz2 \
-    && echo '1b40068166c242e34a536836286e70b78410602a80615143301e52aa2901493b *perl-5.20.3.tar.bz2' | sha256sum -c -
-RUN tar --strip-components=1 -xaf perl-5.20.3.tar.bz2 -C /usr/src/perl \
-    && rm perl-5.20.3.tar.bz2 \
-    && cat *.patch | patch -p1 \
-    && echo 'print "1..0 # Skipped: Tests are invalid"' > /usr/src/perl/ext/GDBM_File/t/fatal.t
-RUN gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)" \
-    && archBits="$(dpkg-architecture --query DEB_BUILD_ARCH_BITS)" \
-    && archFlag="$([ "$archBits" = '64' ] && echo '-Duse64bitall' || echo '-Duse64bitint')" \
-    && ./Configure -Darchname="$gnuArch" "$archFlag" -Dusethreads -Duseshrplib -Dvendorprefix=/usr/local -Aldflags='-Wl,-z,now -Wl,-zrelro -Wl,-z,noexecstack' -Accflags='-fpie -fPIC -fstack-protector-all -pie -D_FORTIFY_SOURCE=2' -Duseshrplib  -des \
-    && make -j$(nproc) \
-    && TEST_JOBS=$(nproc) make test_harness
-RUN make install \
-    && cd /usr/src \
-    && curl -LO https://www.cpan.org/authors/id/M/MI/MIYAGAWA/App-cpanminus-1.7044.tar.gz \
-    && echo '9b60767fe40752ef7a9d3f13f19060a63389a5c23acc3e9827e19b75500f81f3 *App-cpanminus-1.7044.tar.gz' | sha256sum -c - \
-    && tar -xzf App-cpanminus-1.7044.tar.gz && cd App-cpanminus-1.7044 && perl bin/cpanm . && cd /root \
-    && savedPackages="make netbase" \
-    && apt-mark auto '.*' > /dev/null \
-    && apt-mark manual $savedPackages \
-    && apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false \
-    && rm -fr /var/cache/apt/* /var/lib/apt/lists/* \
-    && rm -fr ./cpanm /root/.cpanm /usr/src/perl /usr/src/App-cpanminus-1.7044* /tmp/*
-
-WORKDIR /
-
-CMD ["perl5.20.3","-de0"]

5.020.003-main,threaded-bullseye/fix-pack-longdouble.patch

@@ -1,41 +0,0 @@
-From a2db6c92fc2880ba1f288b6c4599a779997dd4e7 Mon Sep 17 00:00:00 2001
-From: Tony Cook <tony@develop-help.com>
-Date: Thu, 9 Apr 2015 15:45:16 +1000
-Subject: [PATCH] [perl #123971] fix long double pack padding on newer GCC
-
----
- pp_pack.c |   11 +++++++++++
- 1 file changed, 11 insertions(+)
-
-diff --git a/pp_pack.c b/pp_pack.c
-index 06adade..1d732a8 100644
---- a/pp_pack.c
-+++ b/pp_pack.c
-@@ -2709,6 +2709,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		anv.nv = sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(anv.bytes+10, sizeof(anv.bytes) - 10, U8);
-+#    endif
- #else
- 		anv.nv = SvNV(fromstr);
- #endif
-@@ -2726,6 +2732,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #  ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		aldouble.ld = (long double)sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(aldouble.bytes+10, sizeof(aldouble.bytes) - 10, U8);
-+#    endif
- #  else
- 		aldouble.ld = (long double)SvNV(fromstr);
- #  endif
--- 
-1.7.10.4
-
-

5.020.003-main,threaded-buster/DevelPatchPerl.patch

@@ -1,281 +0,0 @@
-diff --git a/Configure b/Configure
-index 438b926..a762f78 100755
---- a/Configure
-+++ b/Configure
-@@ -4591,7 +4591,7 @@ else
- fi
- $rm -f try try.*
- case "$gccversion" in
--1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-+1.*) cpp=`./loc gcc-cpp $cpp $pth` ;;
- esac
- case "$gccversion" in
- '') gccosandvers='' ;;
-@@ -4631,7 +4631,7 @@ esac
- # gcc 3.* complain about adding -Idirectories that they already know about,
- # so we will take those off from locincpth.
- case "$gccversion" in
--3*)
-+3.*)
-     echo "main(){}">try.c
-     for incdir in $locincpth; do
-        warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
-@@ -5328,13 +5328,13 @@ fi
- case "$hint" in
- default|recommended)
- 	case "$gccversion" in
--	1*) dflt="$dflt -fpcc-struct-return" ;;
-+	1.*) dflt="$dflt -fpcc-struct-return" ;;
- 	esac
- 	case "$optimize:$DEBUGGING" in
- 	*-g*:old) dflt="$dflt -DDEBUGGING";;
- 	esac
- 	case "$gccversion" in
--	2*) if $test -d /etc/conf/kconfig.d &&
-+	2.*) if $test -d /etc/conf/kconfig.d &&
- 			$contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- 		then
- 			# Interactive Systems (ISC) POSIX mode.
-@@ -5343,7 +5343,7 @@ default|recommended)
- 		;;
- 	esac
- 	case "$gccversion" in
--	1*) ;;
-+	1.*) ;;
- 	2.[0-8]*) ;;
- 	?*)	set strict-aliasing -fno-strict-aliasing
- 		eval $checkccflag
-@@ -5445,7 +5445,7 @@ case "$cppflags" in
- *)  cppflags="$cppflags $ccflags" ;;
- esac
- case "$gccversion" in
--1*) cppflags="$cppflags -D__GNUC__"
-+1.*) cppflags="$cppflags -D__GNUC__"
- esac
- case "$mips_type" in
- '');;
-diff --git a/cpan/Time-Local/t/Local.t b/cpan/Time-Local/t/Local.t
-index 472e71a..0a852a0 100644
---- a/cpan/Time-Local/t/Local.t
-+++ b/cpan/Time-Local/t/Local.t
-@@ -91,7 +91,7 @@ for (@time, @neg_time) {
- 
-         # Test timelocal()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timelocal($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = localtime($time);
-@@ -107,7 +107,7 @@ for (@time, @neg_time) {
- 
-         # Test timegm()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timegm($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = gmtime($time);
-@@ -125,7 +125,6 @@ for (@time, @neg_time) {
- 
- for (@bad_time) {
-     my($year, $mon, $mday, $hour, $min, $sec) = @$_;
--    $year -= 1900;
-     $mon--;
- 
-     eval { timegm($sec,$min,$hour,$mday,$mon,$year) };
-@@ -134,14 +133,14 @@ for (@bad_time) {
- }
- 
- {
--    is(timelocal(0,0,1,1,0,90) - timelocal(0,0,0,1,0,90), 3600,
-+    is(timelocal(0,0,1,1,0,1990) - timelocal(0,0,0,1,0,1990), 3600,
-        'one hour difference between two calls to timelocal');
- 
--    is(timelocal(1,2,3,1,0,100) - timelocal(1,2,3,31,11,99), 24 * 3600,
-+    is(timelocal(1,2,3,1,0,2000) - timelocal(1,2,3,31,11,1999), 24 * 3600,
-        'one day difference between two calls to timelocal');
- 
-     # Diff beween Jan 1, 1980 and Mar 1, 1980 = (31 + 29 = 60 days)
--    is(timegm(0,0,0, 1, 2, 80) - timegm(0,0,0, 1, 0, 80), 60 * 24 * 3600,
-+    is(timegm(0,0,0, 1, 2, 1980) - timegm(0,0,0, 1, 0, 1980), 60 * 24 * 3600,
-        '60 day difference between two calls to timegm');
- }
- 
-diff --git a/hints/linux.sh b/hints/linux.sh
-index 956adfc..c749f0f 100644
---- a/hints/linux.sh
-+++ b/hints/linux.sh
-@@ -85,7 +85,7 @@ uname_minus_m="${uname_minus_m:-"$targetarch"}"
- 
- # Check if we're about to use Intel's ICC compiler
- case "`${cc:-cc} -V 2>&1`" in
--*"Intel(R) C++ Compiler"*|*"Intel(R) C Compiler"*)
-+*"Intel(R) C"*" Compiler"*)
-     # record the version, formats:
-     # icc (ICC) 10.1 20080801
-     # icpc (ICC) 10.1 20080801
-@@ -165,6 +165,9 @@ esac
- # plibpth to bypass this check.
- if [ -x /usr/bin/gcc ] ; then
-     gcc=/usr/bin/gcc
-+# clang also provides -print-search-dirs
-+elif ${cc:-cc} --version 2>/dev/null | grep -q '^clang ' ; then
-+    gcc=${cc:-cc}
- else
-     gcc=gcc
- fi
-@@ -178,6 +181,33 @@ case "$plibpth" in
-     ;;
- esac
- 
-+# For the musl libc, perl should #define _GNU_SOURCE.  Otherwise, some
-+# available functions, like memem, won't be used.  See the discussion in
-+# [perl #133760].  musl doesn't offer an easy way to identify it, but,
-+# at least on alpine linux, the ldd --version output contains the
-+# string 'musl.'
-+case `ldd --version 2>&1` in
-+    musl*)  ccflags="$ccflags -D_GNU_SOURCE" ;;
-+        *) ;;
-+esac
-+
-+# libquadmath is sometimes installed as gcc internal library,
-+# so contrary to our usual policy of *not* looking at gcc internal
-+# directories we now *do* look at them, in case they contain
-+# the quadmath library.
-+# XXX This may apply to other gcc internal libraries, if such exist.
-+# XXX This could be at Configure level, but then the $gcc is messy.
-+case "$usequadmath" in
-+"$define")
-+  for d in `LANG=C LC_ALL=C $gcc $ccflags $ldflags -print-search-dirs | grep libraries | cut -f2- -d= | tr ':' $trnl | grep 'gcc' | sed -e 's:/$::'`
-+  do
-+    case `ls $d/*libquadmath*$so* 2>/dev/null` in
-+    $d/*libquadmath*$so*) xlibpth="$xlibpth $d" ;;
-+    esac
-+  done
-+  ;;
-+esac
-+
- case "$libc" in
- '')
- # If you have glibc, then report the version for ./myconfig bug reporting.
-@@ -204,92 +234,6 @@ case "$libc" in
-     ;;
- esac
- 
--# Are we using ELF?  Thanks to Kenneth Albanowski <kjahds@kjahds.com>
--# for this test.
--cat >try.c <<'EOM'
--/* Test for whether ELF binaries are produced */
--#include <fcntl.h>
--#include <stdlib.h>
--#include <unistd.h>
--main() {
--	char buffer[4];
--	int i=open("a.out",O_RDONLY);
--	if(i==-1)
--		exit(1); /* fail */
--	if(read(i,&buffer[0],4)<4)
--		exit(1); /* fail */
--	if(buffer[0] != 127 || buffer[1] != 'E' ||
--           buffer[2] != 'L' || buffer[3] != 'F')
--		exit(1); /* fail */
--	exit(0); /* succeed (yes, it's ELF) */
--}
--EOM
--if ${cc:-gcc} $ccflags $ldflags try.c >/dev/null 2>&1 && $run ./a.out; then
--    cat <<'EOM' >&4
--
--You appear to have ELF support.  I'll try to use it for dynamic loading.
--If dynamic loading doesn't work, read hints/linux.sh for further information.
--EOM
--
--else
--    cat <<'EOM' >&4
--
--You don't have an ELF gcc.  I will use dld if possible.  If you are
--using a version of DLD earlier than 3.2.6, or don't have it at all, you
--should probably upgrade. If you are forced to use 3.2.4, you should
--uncomment a couple of lines in hints/linux.sh and restart Configure so
--that shared libraries will be disallowed.
--
--EOM
--    lddlflags="-r $lddlflags"
--    # These empty values are so that Configure doesn't put in the
--    # Linux ELF values.
--    ccdlflags=' '
--    cccdlflags=' '
--    ccflags="-DOVR_DBL_DIG=14 $ccflags"
--    so='sa'
--    dlext='o'
--    nm_so_opt=' '
--    ## If you are using DLD 3.2.4 which does not support shared libs,
--    ## uncomment the next two lines:
--    #ldflags="-static"
--    #so='none'
--
--	# In addition, on some systems there is a problem with perl and NDBM
--	# which causes AnyDBM and NDBM_File to lock up. This is evidenced
--	# in the tests as AnyDBM just freezing.  Apparently, this only
--	# happens on a.out systems, so we disable NDBM for all a.out linux
--	# systems.  If someone can suggest a more robust test
--	#  that would be appreciated.
--	#
--	# More info:
--	# Date: Wed, 7 Feb 1996 03:21:04 +0900
--	# From: Jeffrey Friedl <jfriedl@nff.ncl.omron.co.jp>
--	#
--	# I tried compiling with DBM support and sure enough things locked up
--	# just as advertised. Checking into it, I found that the lockup was
--	# during the call to dbm_open. Not *in* dbm_open -- but between the call
--	# to and the jump into.
--	#
--	# To make a long story short, making sure that the *.a and *.sa pairs of
--	#   /usr/lib/lib{m,db,gdbm}.{a,sa}
--	# were perfectly in sync took care of it.
--	#
--	# This will generate a harmless Whoa There! message
--	case "$d_dbm_open" in
--	'')	cat <<'EOM' >&4
--
--Disabling ndbm.  This will generate a Whoa There message in Configure.
--Read hints/linux.sh for further information.
--EOM
--		# You can override this with Configure -Dd_dbm_open
--		d_dbm_open=undef
--		;;
--	esac
--fi
--
--rm -f try.c a.out
--
- if ${sh:-/bin/sh} -c exit; then
-   echo ''
-   echo 'You appear to have a working bash.  Good.'
-@@ -497,7 +441,7 @@ then
-        DBLIB="$DBDIR/libdb.so"
-        if [ -f $DBLIB ]
-        then
--         if ${nm:-nm} -u $DBLIB | grep pthread >/dev/null
-+         if ${nm:-nm} -u $DBLIB 2>/dev/null | grep pthread >/dev/null
-          then
-            if ldd $DBLIB | grep pthread >/dev/null
-            then
-diff --git a/pp.c b/pp.c
-index 4ec6887..729239c 100644
---- a/pp.c
-+++ b/pp.c
-@@ -3435,8 +3435,12 @@ PP(pp_crypt)
- #if defined(__GLIBC__) || defined(__EMX__)
- 	if (PL_reentrant_buffer->_crypt_struct_buffer) {
- 	    PL_reentrant_buffer->_crypt_struct_buffer->initialized = 0;
--	    /* work around glibc-2.2.5 bug */
-+#if (defined(__GLIBC__) && __GLIBC__ == 2) && \
-+    (defined(__GLIBC_MINOR__) && __GLIBC_MINOR__ >= 2 && __GLIBC_MINOR__ < 4)
-+	    /* work around glibc-2.2.5 bug, has been fixed at some
-+	     * time in glibc-2.3.X */
- 	    PL_reentrant_buffer->_crypt_struct_buffer->current_saltbits = 0;
-+#endif
- 	}
- #endif
-     }

5.020.003-main,threaded-buster/Dockerfile

@@ -1,59 +0,0 @@
-FROM debian:buster-backports
-LABEL maintainer="Ryan Voots <simcop@cpan.org>"
-
-COPY *.patch /usr/src/perl/
-WORKDIR /usr/src/perl
-
-ENV DEBIAN_FRONTEND=noninteractive
-
-RUN perl -i.bak -pE '$x=$_; $x=~s|^deb |deb-src |g;$_.=$x' /etc/apt/sources.list \
-    && apt update \
-    && apt -yq full-upgrade \
-    && apt -yq build-dep perl \
-    &&     apt-get install -y --no-install-recommends \
-       bzip2 \
-       ca-certificates \
-       # cpio \
-       curl \
-       dpkg-dev \
-       # file \
-       gcc \
-       # g++ \
-       libbz2-dev \
-       libdb-dev \
-       libc6-dev \
-       libgdbm-dev \
-       liblzma-dev \
-       make \
-       netbase \
-       patch \
-       procps \
-       zlib1g-dev \
-       xz-utils \
-    && curl -SL https://www.cpan.org/src/5.0/perl-5.20.3.tar.bz2 -o perl-5.20.3.tar.bz2 \
-    && echo '1b40068166c242e34a536836286e70b78410602a80615143301e52aa2901493b *perl-5.20.3.tar.bz2' | sha256sum -c -
-RUN tar --strip-components=1 -xaf perl-5.20.3.tar.bz2 -C /usr/src/perl \
-    && rm perl-5.20.3.tar.bz2 \
-    && cat *.patch | patch -p1 \
-    && echo 'print "1..0 # Skipped: Tests are invalid"' > /usr/src/perl/ext/GDBM_File/t/fatal.t
-RUN gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)" \
-    && archBits="$(dpkg-architecture --query DEB_BUILD_ARCH_BITS)" \
-    && archFlag="$([ "$archBits" = '64' ] && echo '-Duse64bitall' || echo '-Duse64bitint')" \
-    && ./Configure -Darchname="$gnuArch" "$archFlag" -Dusethreads -Duseshrplib -Dvendorprefix=/usr/local -Aldflags='-Wl,-z,now -Wl,-zrelro -Wl,-z,noexecstack' -Accflags='-fpie -fPIC -fstack-protector-all -pie -D_FORTIFY_SOURCE=2' -Duseshrplib  -des \
-    && make -j$(nproc) \
-    && TEST_JOBS=$(nproc) make test_harness
-RUN make install \
-    && cd /usr/src \
-    && curl -LO https://www.cpan.org/authors/id/M/MI/MIYAGAWA/App-cpanminus-1.7044.tar.gz \
-    && echo '9b60767fe40752ef7a9d3f13f19060a63389a5c23acc3e9827e19b75500f81f3 *App-cpanminus-1.7044.tar.gz' | sha256sum -c - \
-    && tar -xzf App-cpanminus-1.7044.tar.gz && cd App-cpanminus-1.7044 && perl bin/cpanm . && cd /root \
-    && savedPackages="make netbase" \
-    && apt-mark auto '.*' > /dev/null \
-    && apt-mark manual $savedPackages \
-    && apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false \
-    && rm -fr /var/cache/apt/* /var/lib/apt/lists/* \
-    && rm -fr ./cpanm /root/.cpanm /usr/src/perl /usr/src/App-cpanminus-1.7044* /tmp/*
-
-WORKDIR /
-
-CMD ["perl5.20.3","-de0"]

5.020.003-main,threaded-buster/fix-pack-longdouble.patch

@@ -1,41 +0,0 @@
-From a2db6c92fc2880ba1f288b6c4599a779997dd4e7 Mon Sep 17 00:00:00 2001
-From: Tony Cook <tony@develop-help.com>
-Date: Thu, 9 Apr 2015 15:45:16 +1000
-Subject: [PATCH] [perl #123971] fix long double pack padding on newer GCC
-
----
- pp_pack.c |   11 +++++++++++
- 1 file changed, 11 insertions(+)
-
-diff --git a/pp_pack.c b/pp_pack.c
-index 06adade..1d732a8 100644
---- a/pp_pack.c
-+++ b/pp_pack.c
-@@ -2709,6 +2709,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		anv.nv = sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(anv.bytes+10, sizeof(anv.bytes) - 10, U8);
-+#    endif
- #else
- 		anv.nv = SvNV(fromstr);
- #endif
-@@ -2726,6 +2732,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #  ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		aldouble.ld = (long double)sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(aldouble.bytes+10, sizeof(aldouble.bytes) - 10, U8);
-+#    endif
- #  else
- 		aldouble.ld = (long double)SvNV(fromstr);
- #  endif
--- 
-1.7.10.4
-
-

5.020.003-main-bullseye/DevelPatchPerl.patch

@@ -1,281 +0,0 @@
-diff --git a/Configure b/Configure
-index 438b926..a762f78 100755
---- a/Configure
-+++ b/Configure
-@@ -4591,7 +4591,7 @@ else
- fi
- $rm -f try try.*
- case "$gccversion" in
--1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-+1.*) cpp=`./loc gcc-cpp $cpp $pth` ;;
- esac
- case "$gccversion" in
- '') gccosandvers='' ;;
-@@ -4631,7 +4631,7 @@ esac
- # gcc 3.* complain about adding -Idirectories that they already know about,
- # so we will take those off from locincpth.
- case "$gccversion" in
--3*)
-+3.*)
-     echo "main(){}">try.c
-     for incdir in $locincpth; do
-        warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
-@@ -5328,13 +5328,13 @@ fi
- case "$hint" in
- default|recommended)
- 	case "$gccversion" in
--	1*) dflt="$dflt -fpcc-struct-return" ;;
-+	1.*) dflt="$dflt -fpcc-struct-return" ;;
- 	esac
- 	case "$optimize:$DEBUGGING" in
- 	*-g*:old) dflt="$dflt -DDEBUGGING";;
- 	esac
- 	case "$gccversion" in
--	2*) if $test -d /etc/conf/kconfig.d &&
-+	2.*) if $test -d /etc/conf/kconfig.d &&
- 			$contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- 		then
- 			# Interactive Systems (ISC) POSIX mode.
-@@ -5343,7 +5343,7 @@ default|recommended)
- 		;;
- 	esac
- 	case "$gccversion" in
--	1*) ;;
-+	1.*) ;;
- 	2.[0-8]*) ;;
- 	?*)	set strict-aliasing -fno-strict-aliasing
- 		eval $checkccflag
-@@ -5445,7 +5445,7 @@ case "$cppflags" in
- *)  cppflags="$cppflags $ccflags" ;;
- esac
- case "$gccversion" in
--1*) cppflags="$cppflags -D__GNUC__"
-+1.*) cppflags="$cppflags -D__GNUC__"
- esac
- case "$mips_type" in
- '');;
-diff --git a/cpan/Time-Local/t/Local.t b/cpan/Time-Local/t/Local.t
-index 472e71a..0a852a0 100644
---- a/cpan/Time-Local/t/Local.t
-+++ b/cpan/Time-Local/t/Local.t
-@@ -91,7 +91,7 @@ for (@time, @neg_time) {
- 
-         # Test timelocal()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timelocal($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = localtime($time);
-@@ -107,7 +107,7 @@ for (@time, @neg_time) {
- 
-         # Test timegm()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timegm($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = gmtime($time);
-@@ -125,7 +125,6 @@ for (@time, @neg_time) {
- 
- for (@bad_time) {
-     my($year, $mon, $mday, $hour, $min, $sec) = @$_;
--    $year -= 1900;
-     $mon--;
- 
-     eval { timegm($sec,$min,$hour,$mday,$mon,$year) };
-@@ -134,14 +133,14 @@ for (@bad_time) {
- }
- 
- {
--    is(timelocal(0,0,1,1,0,90) - timelocal(0,0,0,1,0,90), 3600,
-+    is(timelocal(0,0,1,1,0,1990) - timelocal(0,0,0,1,0,1990), 3600,
-        'one hour difference between two calls to timelocal');
- 
--    is(timelocal(1,2,3,1,0,100) - timelocal(1,2,3,31,11,99), 24 * 3600,
-+    is(timelocal(1,2,3,1,0,2000) - timelocal(1,2,3,31,11,1999), 24 * 3600,
-        'one day difference between two calls to timelocal');
- 
-     # Diff beween Jan 1, 1980 and Mar 1, 1980 = (31 + 29 = 60 days)
--    is(timegm(0,0,0, 1, 2, 80) - timegm(0,0,0, 1, 0, 80), 60 * 24 * 3600,
-+    is(timegm(0,0,0, 1, 2, 1980) - timegm(0,0,0, 1, 0, 1980), 60 * 24 * 3600,
-        '60 day difference between two calls to timegm');
- }
- 
-diff --git a/hints/linux.sh b/hints/linux.sh
-index 956adfc..c749f0f 100644
---- a/hints/linux.sh
-+++ b/hints/linux.sh
-@@ -85,7 +85,7 @@ uname_minus_m="${uname_minus_m:-"$targetarch"}"
- 
- # Check if we're about to use Intel's ICC compiler
- case "`${cc:-cc} -V 2>&1`" in
--*"Intel(R) C++ Compiler"*|*"Intel(R) C Compiler"*)
-+*"Intel(R) C"*" Compiler"*)
-     # record the version, formats:
-     # icc (ICC) 10.1 20080801
-     # icpc (ICC) 10.1 20080801
-@@ -165,6 +165,9 @@ esac
- # plibpth to bypass this check.
- if [ -x /usr/bin/gcc ] ; then
-     gcc=/usr/bin/gcc
-+# clang also provides -print-search-dirs
-+elif ${cc:-cc} --version 2>/dev/null | grep -q '^clang ' ; then
-+    gcc=${cc:-cc}
- else
-     gcc=gcc
- fi
-@@ -178,6 +181,33 @@ case "$plibpth" in
-     ;;
- esac
- 
-+# For the musl libc, perl should #define _GNU_SOURCE.  Otherwise, some
-+# available functions, like memem, won't be used.  See the discussion in
-+# [perl #133760].  musl doesn't offer an easy way to identify it, but,
-+# at least on alpine linux, the ldd --version output contains the
-+# string 'musl.'
-+case `ldd --version 2>&1` in
-+    musl*)  ccflags="$ccflags -D_GNU_SOURCE" ;;
-+        *) ;;
-+esac
-+
-+# libquadmath is sometimes installed as gcc internal library,
-+# so contrary to our usual policy of *not* looking at gcc internal
-+# directories we now *do* look at them, in case they contain
-+# the quadmath library.
-+# XXX This may apply to other gcc internal libraries, if such exist.
-+# XXX This could be at Configure level, but then the $gcc is messy.
-+case "$usequadmath" in
-+"$define")
-+  for d in `LANG=C LC_ALL=C $gcc $ccflags $ldflags -print-search-dirs | grep libraries | cut -f2- -d= | tr ':' $trnl | grep 'gcc' | sed -e 's:/$::'`
-+  do
-+    case `ls $d/*libquadmath*$so* 2>/dev/null` in
-+    $d/*libquadmath*$so*) xlibpth="$xlibpth $d" ;;
-+    esac
-+  done
-+  ;;
-+esac
-+
- case "$libc" in
- '')
- # If you have glibc, then report the version for ./myconfig bug reporting.
-@@ -204,92 +234,6 @@ case "$libc" in
-     ;;
- esac
- 
--# Are we using ELF?  Thanks to Kenneth Albanowski <kjahds@kjahds.com>
--# for this test.
--cat >try.c <<'EOM'
--/* Test for whether ELF binaries are produced */
--#include <fcntl.h>
--#include <stdlib.h>
--#include <unistd.h>
--main() {
--	char buffer[4];
--	int i=open("a.out",O_RDONLY);
--	if(i==-1)
--		exit(1); /* fail */
--	if(read(i,&buffer[0],4)<4)
--		exit(1); /* fail */
--	if(buffer[0] != 127 || buffer[1] != 'E' ||
--           buffer[2] != 'L' || buffer[3] != 'F')
--		exit(1); /* fail */
--	exit(0); /* succeed (yes, it's ELF) */
--}
--EOM
--if ${cc:-gcc} $ccflags $ldflags try.c >/dev/null 2>&1 && $run ./a.out; then
--    cat <<'EOM' >&4
--
--You appear to have ELF support.  I'll try to use it for dynamic loading.
--If dynamic loading doesn't work, read hints/linux.sh for further information.
--EOM
--
--else
--    cat <<'EOM' >&4
--
--You don't have an ELF gcc.  I will use dld if possible.  If you are
--using a version of DLD earlier than 3.2.6, or don't have it at all, you
--should probably upgrade. If you are forced to use 3.2.4, you should
--uncomment a couple of lines in hints/linux.sh and restart Configure so
--that shared libraries will be disallowed.
--
--EOM
--    lddlflags="-r $lddlflags"
--    # These empty values are so that Configure doesn't put in the
--    # Linux ELF values.
--    ccdlflags=' '
--    cccdlflags=' '
--    ccflags="-DOVR_DBL_DIG=14 $ccflags"
--    so='sa'
--    dlext='o'
--    nm_so_opt=' '
--    ## If you are using DLD 3.2.4 which does not support shared libs,
--    ## uncomment the next two lines:
--    #ldflags="-static"
--    #so='none'
--
--	# In addition, on some systems there is a problem with perl and NDBM
--	# which causes AnyDBM and NDBM_File to lock up. This is evidenced
--	# in the tests as AnyDBM just freezing.  Apparently, this only
--	# happens on a.out systems, so we disable NDBM for all a.out linux
--	# systems.  If someone can suggest a more robust test
--	#  that would be appreciated.
--	#
--	# More info:
--	# Date: Wed, 7 Feb 1996 03:21:04 +0900
--	# From: Jeffrey Friedl <jfriedl@nff.ncl.omron.co.jp>
--	#
--	# I tried compiling with DBM support and sure enough things locked up
--	# just as advertised. Checking into it, I found that the lockup was
--	# during the call to dbm_open. Not *in* dbm_open -- but between the call
--	# to and the jump into.
--	#
--	# To make a long story short, making sure that the *.a and *.sa pairs of
--	#   /usr/lib/lib{m,db,gdbm}.{a,sa}
--	# were perfectly in sync took care of it.
--	#
--	# This will generate a harmless Whoa There! message
--	case "$d_dbm_open" in
--	'')	cat <<'EOM' >&4
--
--Disabling ndbm.  This will generate a Whoa There message in Configure.
--Read hints/linux.sh for further information.
--EOM
--		# You can override this with Configure -Dd_dbm_open
--		d_dbm_open=undef
--		;;
--	esac
--fi
--
--rm -f try.c a.out
--
- if ${sh:-/bin/sh} -c exit; then
-   echo ''
-   echo 'You appear to have a working bash.  Good.'
-@@ -497,7 +441,7 @@ then
-        DBLIB="$DBDIR/libdb.so"
-        if [ -f $DBLIB ]
-        then
--         if ${nm:-nm} -u $DBLIB | grep pthread >/dev/null
-+         if ${nm:-nm} -u $DBLIB 2>/dev/null | grep pthread >/dev/null
-          then
-            if ldd $DBLIB | grep pthread >/dev/null
-            then
-diff --git a/pp.c b/pp.c
-index 4ec6887..729239c 100644
---- a/pp.c
-+++ b/pp.c
-@@ -3435,8 +3435,12 @@ PP(pp_crypt)
- #if defined(__GLIBC__) || defined(__EMX__)
- 	if (PL_reentrant_buffer->_crypt_struct_buffer) {
- 	    PL_reentrant_buffer->_crypt_struct_buffer->initialized = 0;
--	    /* work around glibc-2.2.5 bug */
-+#if (defined(__GLIBC__) && __GLIBC__ == 2) && \
-+    (defined(__GLIBC_MINOR__) && __GLIBC_MINOR__ >= 2 && __GLIBC_MINOR__ < 4)
-+	    /* work around glibc-2.2.5 bug, has been fixed at some
-+	     * time in glibc-2.3.X */
- 	    PL_reentrant_buffer->_crypt_struct_buffer->current_saltbits = 0;
-+#endif
- 	}
- #endif
-     }

5.020.003-main-bullseye/Dockerfile

@@ -1,59 +0,0 @@
-FROM debian:bullseye-backports
-LABEL maintainer="Ryan Voots <simcop@cpan.org>"
-
-COPY *.patch /usr/src/perl/
-WORKDIR /usr/src/perl
-
-ENV DEBIAN_FRONTEND=noninteractive
-
-RUN perl -i.bak -pE '$x=$_; $x=~s|^deb |deb-src |g;$_.=$x' /etc/apt/sources.list \
-    && apt update \
-    && apt -yq full-upgrade \
-    && apt -yq build-dep perl \
-    &&     apt-get install -y --no-install-recommends \
-       bzip2 \
-       ca-certificates \
-       # cpio \
-       curl \
-       dpkg-dev \
-       # file \
-       gcc \
-       # g++ \
-       libbz2-dev \
-       libdb-dev \
-       libc6-dev \
-       libgdbm-dev \
-       liblzma-dev \
-       make \
-       netbase \
-       patch \
-       procps \
-       zlib1g-dev \
-       xz-utils \
-    && curl -SL https://www.cpan.org/src/5.0/perl-5.20.3.tar.bz2 -o perl-5.20.3.tar.bz2 \
-    && echo '1b40068166c242e34a536836286e70b78410602a80615143301e52aa2901493b *perl-5.20.3.tar.bz2' | sha256sum -c -
-RUN tar --strip-components=1 -xaf perl-5.20.3.tar.bz2 -C /usr/src/perl \
-    && rm perl-5.20.3.tar.bz2 \
-    && cat *.patch | patch -p1 \
-    && echo 'print "1..0 # Skipped: Tests are invalid"' > /usr/src/perl/ext/GDBM_File/t/fatal.t
-RUN gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)" \
-    && archBits="$(dpkg-architecture --query DEB_BUILD_ARCH_BITS)" \
-    && archFlag="$([ "$archBits" = '64' ] && echo '-Duse64bitall' || echo '-Duse64bitint')" \
-    && ./Configure -Darchname="$gnuArch" "$archFlag" -Duseshrplib -Dvendorprefix=/usr/local -Aldflags='-Wl,-z,now -Wl,-zrelro -Wl,-z,noexecstack' -Accflags='-fpie -fPIC -fstack-protector-all -pie -D_FORTIFY_SOURCE=2' -Duseshrplib  -des \
-    && make -j$(nproc) \
-    && TEST_JOBS=$(nproc) make test_harness
-RUN make install \
-    && cd /usr/src \
-    && curl -LO https://www.cpan.org/authors/id/M/MI/MIYAGAWA/App-cpanminus-1.7044.tar.gz \
-    && echo '9b60767fe40752ef7a9d3f13f19060a63389a5c23acc3e9827e19b75500f81f3 *App-cpanminus-1.7044.tar.gz' | sha256sum -c - \
-    && tar -xzf App-cpanminus-1.7044.tar.gz && cd App-cpanminus-1.7044 && perl bin/cpanm . && cd /root \
-    && savedPackages="make netbase" \
-    && apt-mark auto '.*' > /dev/null \
-    && apt-mark manual $savedPackages \
-    && apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false \
-    && rm -fr /var/cache/apt/* /var/lib/apt/lists/* \
-    && rm -fr ./cpanm /root/.cpanm /usr/src/perl /usr/src/App-cpanminus-1.7044* /tmp/*
-
-WORKDIR /
-
-CMD ["perl5.20.3","-de0"]

5.020.003-main-bullseye/fix-pack-longdouble.patch

@@ -1,41 +0,0 @@
-From a2db6c92fc2880ba1f288b6c4599a779997dd4e7 Mon Sep 17 00:00:00 2001
-From: Tony Cook <tony@develop-help.com>
-Date: Thu, 9 Apr 2015 15:45:16 +1000
-Subject: [PATCH] [perl #123971] fix long double pack padding on newer GCC
-
----
- pp_pack.c |   11 +++++++++++
- 1 file changed, 11 insertions(+)
-
-diff --git a/pp_pack.c b/pp_pack.c
-index 06adade..1d732a8 100644
---- a/pp_pack.c
-+++ b/pp_pack.c
-@@ -2709,6 +2709,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		anv.nv = sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(anv.bytes+10, sizeof(anv.bytes) - 10, U8);
-+#    endif
- #else
- 		anv.nv = SvNV(fromstr);
- #endif
-@@ -2726,6 +2732,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #  ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		aldouble.ld = (long double)sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(aldouble.bytes+10, sizeof(aldouble.bytes) - 10, U8);
-+#    endif
- #  else
- 		aldouble.ld = (long double)SvNV(fromstr);
- #  endif
--- 
-1.7.10.4
-
-

5.020.003-main-buster/DevelPatchPerl.patch

@@ -1,281 +0,0 @@
-diff --git a/Configure b/Configure
-index 438b926..a762f78 100755
---- a/Configure
-+++ b/Configure
-@@ -4591,7 +4591,7 @@ else
- fi
- $rm -f try try.*
- case "$gccversion" in
--1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-+1.*) cpp=`./loc gcc-cpp $cpp $pth` ;;
- esac
- case "$gccversion" in
- '') gccosandvers='' ;;
-@@ -4631,7 +4631,7 @@ esac
- # gcc 3.* complain about adding -Idirectories that they already know about,
- # so we will take those off from locincpth.
- case "$gccversion" in
--3*)
-+3.*)
-     echo "main(){}">try.c
-     for incdir in $locincpth; do
-        warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
-@@ -5328,13 +5328,13 @@ fi
- case "$hint" in
- default|recommended)
- 	case "$gccversion" in
--	1*) dflt="$dflt -fpcc-struct-return" ;;
-+	1.*) dflt="$dflt -fpcc-struct-return" ;;
- 	esac
- 	case "$optimize:$DEBUGGING" in
- 	*-g*:old) dflt="$dflt -DDEBUGGING";;
- 	esac
- 	case "$gccversion" in
--	2*) if $test -d /etc/conf/kconfig.d &&
-+	2.*) if $test -d /etc/conf/kconfig.d &&
- 			$contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- 		then
- 			# Interactive Systems (ISC) POSIX mode.
-@@ -5343,7 +5343,7 @@ default|recommended)
- 		;;
- 	esac
- 	case "$gccversion" in
--	1*) ;;
-+	1.*) ;;
- 	2.[0-8]*) ;;
- 	?*)	set strict-aliasing -fno-strict-aliasing
- 		eval $checkccflag
-@@ -5445,7 +5445,7 @@ case "$cppflags" in
- *)  cppflags="$cppflags $ccflags" ;;
- esac
- case "$gccversion" in
--1*) cppflags="$cppflags -D__GNUC__"
-+1.*) cppflags="$cppflags -D__GNUC__"
- esac
- case "$mips_type" in
- '');;
-diff --git a/cpan/Time-Local/t/Local.t b/cpan/Time-Local/t/Local.t
-index 472e71a..0a852a0 100644
---- a/cpan/Time-Local/t/Local.t
-+++ b/cpan/Time-Local/t/Local.t
-@@ -91,7 +91,7 @@ for (@time, @neg_time) {
- 
-         # Test timelocal()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timelocal($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = localtime($time);
-@@ -107,7 +107,7 @@ for (@time, @neg_time) {
- 
-         # Test timegm()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timegm($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = gmtime($time);
-@@ -125,7 +125,6 @@ for (@time, @neg_time) {
- 
- for (@bad_time) {
-     my($year, $mon, $mday, $hour, $min, $sec) = @$_;
--    $year -= 1900;
-     $mon--;
- 
-     eval { timegm($sec,$min,$hour,$mday,$mon,$year) };
-@@ -134,14 +133,14 @@ for (@bad_time) {
- }
- 
- {
--    is(timelocal(0,0,1,1,0,90) - timelocal(0,0,0,1,0,90), 3600,
-+    is(timelocal(0,0,1,1,0,1990) - timelocal(0,0,0,1,0,1990), 3600,
-        'one hour difference between two calls to timelocal');
- 
--    is(timelocal(1,2,3,1,0,100) - timelocal(1,2,3,31,11,99), 24 * 3600,
-+    is(timelocal(1,2,3,1,0,2000) - timelocal(1,2,3,31,11,1999), 24 * 3600,
-        'one day difference between two calls to timelocal');
- 
-     # Diff beween Jan 1, 1980 and Mar 1, 1980 = (31 + 29 = 60 days)
--    is(timegm(0,0,0, 1, 2, 80) - timegm(0,0,0, 1, 0, 80), 60 * 24 * 3600,
-+    is(timegm(0,0,0, 1, 2, 1980) - timegm(0,0,0, 1, 0, 1980), 60 * 24 * 3600,
-        '60 day difference between two calls to timegm');
- }
- 
-diff --git a/hints/linux.sh b/hints/linux.sh
-index 956adfc..c749f0f 100644
---- a/hints/linux.sh
-+++ b/hints/linux.sh
-@@ -85,7 +85,7 @@ uname_minus_m="${uname_minus_m:-"$targetarch"}"
- 
- # Check if we're about to use Intel's ICC compiler
- case "`${cc:-cc} -V 2>&1`" in
--*"Intel(R) C++ Compiler"*|*"Intel(R) C Compiler"*)
-+*"Intel(R) C"*" Compiler"*)
-     # record the version, formats:
-     # icc (ICC) 10.1 20080801
-     # icpc (ICC) 10.1 20080801
-@@ -165,6 +165,9 @@ esac
- # plibpth to bypass this check.
- if [ -x /usr/bin/gcc ] ; then
-     gcc=/usr/bin/gcc
-+# clang also provides -print-search-dirs
-+elif ${cc:-cc} --version 2>/dev/null | grep -q '^clang ' ; then
-+    gcc=${cc:-cc}
- else
-     gcc=gcc
- fi
-@@ -178,6 +181,33 @@ case "$plibpth" in
-     ;;
- esac
- 
-+# For the musl libc, perl should #define _GNU_SOURCE.  Otherwise, some
-+# available functions, like memem, won't be used.  See the discussion in
-+# [perl #133760].  musl doesn't offer an easy way to identify it, but,
-+# at least on alpine linux, the ldd --version output contains the
-+# string 'musl.'
-+case `ldd --version 2>&1` in
-+    musl*)  ccflags="$ccflags -D_GNU_SOURCE" ;;
-+        *) ;;
-+esac
-+
-+# libquadmath is sometimes installed as gcc internal library,
-+# so contrary to our usual policy of *not* looking at gcc internal
-+# directories we now *do* look at them, in case they contain
-+# the quadmath library.
-+# XXX This may apply to other gcc internal libraries, if such exist.
-+# XXX This could be at Configure level, but then the $gcc is messy.
-+case "$usequadmath" in
-+"$define")
-+  for d in `LANG=C LC_ALL=C $gcc $ccflags $ldflags -print-search-dirs | grep libraries | cut -f2- -d= | tr ':' $trnl | grep 'gcc' | sed -e 's:/$::'`
-+  do
-+    case `ls $d/*libquadmath*$so* 2>/dev/null` in
-+    $d/*libquadmath*$so*) xlibpth="$xlibpth $d" ;;
-+    esac
-+  done
-+  ;;
-+esac
-+
- case "$libc" in
- '')
- # If you have glibc, then report the version for ./myconfig bug reporting.
-@@ -204,92 +234,6 @@ case "$libc" in
-     ;;
- esac
- 
--# Are we using ELF?  Thanks to Kenneth Albanowski <kjahds@kjahds.com>
--# for this test.
--cat >try.c <<'EOM'
--/* Test for whether ELF binaries are produced */
--#include <fcntl.h>
--#include <stdlib.h>
--#include <unistd.h>
--main() {
--	char buffer[4];
--	int i=open("a.out",O_RDONLY);
--	if(i==-1)
--		exit(1); /* fail */
--	if(read(i,&buffer[0],4)<4)
--		exit(1); /* fail */
--	if(buffer[0] != 127 || buffer[1] != 'E' ||
--           buffer[2] != 'L' || buffer[3] != 'F')
--		exit(1); /* fail */
--	exit(0); /* succeed (yes, it's ELF) */
--}
--EOM
--if ${cc:-gcc} $ccflags $ldflags try.c >/dev/null 2>&1 && $run ./a.out; then
--    cat <<'EOM' >&4
--
--You appear to have ELF support.  I'll try to use it for dynamic loading.
--If dynamic loading doesn't work, read hints/linux.sh for further information.
--EOM
--
--else
--    cat <<'EOM' >&4
--
--You don't have an ELF gcc.  I will use dld if possible.  If you are
--using a version of DLD earlier than 3.2.6, or don't have it at all, you
--should probably upgrade. If you are forced to use 3.2.4, you should
--uncomment a couple of lines in hints/linux.sh and restart Configure so
--that shared libraries will be disallowed.
--
--EOM
--    lddlflags="-r $lddlflags"
--    # These empty values are so that Configure doesn't put in the
--    # Linux ELF values.
--    ccdlflags=' '
--    cccdlflags=' '
--    ccflags="-DOVR_DBL_DIG=14 $ccflags"
--    so='sa'
--    dlext='o'
--    nm_so_opt=' '
--    ## If you are using DLD 3.2.4 which does not support shared libs,
--    ## uncomment the next two lines:
--    #ldflags="-static"
--    #so='none'
--
--	# In addition, on some systems there is a problem with perl and NDBM
--	# which causes AnyDBM and NDBM_File to lock up. This is evidenced
--	# in the tests as AnyDBM just freezing.  Apparently, this only
--	# happens on a.out systems, so we disable NDBM for all a.out linux
--	# systems.  If someone can suggest a more robust test
--	#  that would be appreciated.
--	#
--	# More info:
--	# Date: Wed, 7 Feb 1996 03:21:04 +0900
--	# From: Jeffrey Friedl <jfriedl@nff.ncl.omron.co.jp>
--	#
--	# I tried compiling with DBM support and sure enough things locked up
--	# just as advertised. Checking into it, I found that the lockup was
--	# during the call to dbm_open. Not *in* dbm_open -- but between the call
--	# to and the jump into.
--	#
--	# To make a long story short, making sure that the *.a and *.sa pairs of
--	#   /usr/lib/lib{m,db,gdbm}.{a,sa}
--	# were perfectly in sync took care of it.
--	#
--	# This will generate a harmless Whoa There! message
--	case "$d_dbm_open" in
--	'')	cat <<'EOM' >&4
--
--Disabling ndbm.  This will generate a Whoa There message in Configure.
--Read hints/linux.sh for further information.
--EOM
--		# You can override this with Configure -Dd_dbm_open
--		d_dbm_open=undef
--		;;
--	esac
--fi
--
--rm -f try.c a.out
--
- if ${sh:-/bin/sh} -c exit; then
-   echo ''
-   echo 'You appear to have a working bash.  Good.'
-@@ -497,7 +441,7 @@ then
-        DBLIB="$DBDIR/libdb.so"
-        if [ -f $DBLIB ]
-        then
--         if ${nm:-nm} -u $DBLIB | grep pthread >/dev/null
-+         if ${nm:-nm} -u $DBLIB 2>/dev/null | grep pthread >/dev/null
-          then
-            if ldd $DBLIB | grep pthread >/dev/null
-            then
-diff --git a/pp.c b/pp.c
-index 4ec6887..729239c 100644
---- a/pp.c
-+++ b/pp.c
-@@ -3435,8 +3435,12 @@ PP(pp_crypt)
- #if defined(__GLIBC__) || defined(__EMX__)
- 	if (PL_reentrant_buffer->_crypt_struct_buffer) {
- 	    PL_reentrant_buffer->_crypt_struct_buffer->initialized = 0;
--	    /* work around glibc-2.2.5 bug */
-+#if (defined(__GLIBC__) && __GLIBC__ == 2) && \
-+    (defined(__GLIBC_MINOR__) && __GLIBC_MINOR__ >= 2 && __GLIBC_MINOR__ < 4)
-+	    /* work around glibc-2.2.5 bug, has been fixed at some
-+	     * time in glibc-2.3.X */
- 	    PL_reentrant_buffer->_crypt_struct_buffer->current_saltbits = 0;
-+#endif
- 	}
- #endif
-     }

5.020.003-main-buster/Dockerfile

@@ -1,59 +0,0 @@
-FROM debian:buster-backports
-LABEL maintainer="Ryan Voots <simcop@cpan.org>"
-
-COPY *.patch /usr/src/perl/
-WORKDIR /usr/src/perl
-
-ENV DEBIAN_FRONTEND=noninteractive
-
-RUN perl -i.bak -pE '$x=$_; $x=~s|^deb |deb-src |g;$_.=$x' /etc/apt/sources.list \
-    && apt update \
-    && apt -yq full-upgrade \
-    && apt -yq build-dep perl \
-    &&     apt-get install -y --no-install-recommends \
-       bzip2 \
-       ca-certificates \
-       # cpio \
-       curl \
-       dpkg-dev \
-       # file \
-       gcc \
-       # g++ \
-       libbz2-dev \
-       libdb-dev \
-       libc6-dev \
-       libgdbm-dev \
-       liblzma-dev \
-       make \
-       netbase \
-       patch \
-       procps \
-       zlib1g-dev \
-       xz-utils \
-    && curl -SL https://www.cpan.org/src/5.0/perl-5.20.3.tar.bz2 -o perl-5.20.3.tar.bz2 \
-    && echo '1b40068166c242e34a536836286e70b78410602a80615143301e52aa2901493b *perl-5.20.3.tar.bz2' | sha256sum -c -
-RUN tar --strip-components=1 -xaf perl-5.20.3.tar.bz2 -C /usr/src/perl \
-    && rm perl-5.20.3.tar.bz2 \
-    && cat *.patch | patch -p1 \
-    && echo 'print "1..0 # Skipped: Tests are invalid"' > /usr/src/perl/ext/GDBM_File/t/fatal.t
-RUN gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)" \
-    && archBits="$(dpkg-architecture --query DEB_BUILD_ARCH_BITS)" \
-    && archFlag="$([ "$archBits" = '64' ] && echo '-Duse64bitall' || echo '-Duse64bitint')" \
-    && ./Configure -Darchname="$gnuArch" "$archFlag" -Duseshrplib -Dvendorprefix=/usr/local -Aldflags='-Wl,-z,now -Wl,-zrelro -Wl,-z,noexecstack' -Accflags='-fpie -fPIC -fstack-protector-all -pie -D_FORTIFY_SOURCE=2' -Duseshrplib  -des \
-    && make -j$(nproc) \
-    && TEST_JOBS=$(nproc) make test_harness
-RUN make install \
-    && cd /usr/src \
-    && curl -LO https://www.cpan.org/authors/id/M/MI/MIYAGAWA/App-cpanminus-1.7044.tar.gz \
-    && echo '9b60767fe40752ef7a9d3f13f19060a63389a5c23acc3e9827e19b75500f81f3 *App-cpanminus-1.7044.tar.gz' | sha256sum -c - \
-    && tar -xzf App-cpanminus-1.7044.tar.gz && cd App-cpanminus-1.7044 && perl bin/cpanm . && cd /root \
-    && savedPackages="make netbase" \
-    && apt-mark auto '.*' > /dev/null \
-    && apt-mark manual $savedPackages \
-    && apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false \
-    && rm -fr /var/cache/apt/* /var/lib/apt/lists/* \
-    && rm -fr ./cpanm /root/.cpanm /usr/src/perl /usr/src/App-cpanminus-1.7044* /tmp/*
-
-WORKDIR /
-
-CMD ["perl5.20.3","-de0"]

5.020.003-main-buster/fix-pack-longdouble.patch

@@ -1,41 +0,0 @@
-From a2db6c92fc2880ba1f288b6c4599a779997dd4e7 Mon Sep 17 00:00:00 2001
-From: Tony Cook <tony@develop-help.com>
-Date: Thu, 9 Apr 2015 15:45:16 +1000
-Subject: [PATCH] [perl #123971] fix long double pack padding on newer GCC
-
----
- pp_pack.c |   11 +++++++++++
- 1 file changed, 11 insertions(+)
-
-diff --git a/pp_pack.c b/pp_pack.c
-index 06adade..1d732a8 100644
---- a/pp_pack.c
-+++ b/pp_pack.c
-@@ -2709,6 +2709,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		anv.nv = sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(anv.bytes+10, sizeof(anv.bytes) - 10, U8);
-+#    endif
- #else
- 		anv.nv = SvNV(fromstr);
- #endif
-@@ -2726,6 +2732,11 @@ S_pack_rec(pTHX_ SV *cat, tempsym_t* symptr, SV **beglist, SV **endlist )
- #  ifdef __GNUC__
- 		/* to work round a gcc/x86 bug; don't use SvNV */
- 		aldouble.ld = (long double)sv_2nv(fromstr);
-+#    if defined(USE_LONG_DOUBLE)
-+                /* GCC sometimes overwrites the padding in the
-+                   assignment above */
-+                Zero(aldouble.bytes+10, sizeof(aldouble.bytes) - 10, U8);
-+#    endif
- #  else
- 		aldouble.ld = (long double)SvNV(fromstr);
- #  endif
--- 
-1.7.10.4
-
-

5.022.004-main,debugging,longdouble,threaded-bullseye/DevelPatchPerl.patch

@@ -1,264 +0,0 @@
-diff --git a/Configure b/Configure
-index 5f5f279..8ce5cbb 100755
---- a/Configure
-+++ b/Configure
-@@ -4658,7 +4658,7 @@ else
- fi
- $rm -f try try.*
- case "$gccversion" in
--1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-+1.*) cpp=`./loc gcc-cpp $cpp $pth` ;;
- esac
- case "$gccversion" in
- '') gccosandvers='' ;;
-@@ -4698,7 +4698,7 @@ esac
- # gcc 3.* complain about adding -Idirectories that they already know about,
- # so we will take those off from locincpth.
- case "$gccversion" in
--3*)
-+3.*)
-     echo "main(){}">try.c
-     for incdir in $locincpth; do
-        warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
-@@ -5410,13 +5410,13 @@ fi
- case "$hint" in
- default|recommended)
- 	case "$gccversion" in
--	1*) dflt="$dflt -fpcc-struct-return" ;;
-+	1.*) dflt="$dflt -fpcc-struct-return" ;;
- 	esac
- 	case "$optimize:$DEBUGGING" in
- 	*-g*:old) dflt="$dflt -DDEBUGGING";;
- 	esac
- 	case "$gccversion" in
--	2*) if $test -d /etc/conf/kconfig.d &&
-+	2.*) if $test -d /etc/conf/kconfig.d &&
- 			$contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- 		then
- 			# Interactive Systems (ISC) POSIX mode.
-@@ -5425,7 +5425,7 @@ default|recommended)
- 		;;
- 	esac
- 	case "$gccversion" in
--	1*) ;;
-+	1.*) ;;
- 	2.[0-8]*) ;;
- 	?*)	set strict-aliasing -fno-strict-aliasing
- 		eval $checkccflag
-@@ -5534,7 +5534,7 @@ case "$cppflags" in
- *)  cppflags="$cppflags $ccflags" ;;
- esac
- case "$gccversion" in
--1*) cppflags="$cppflags -D__GNUC__"
-+1.*) cppflags="$cppflags -D__GNUC__"
- esac
- case "$mips_type" in
- '');;
-@@ -23010,7 +23010,7 @@ fi
- 
- : add -D_FORTIFY_SOURCE if feasible and not already there
- case "$gccversion" in
--[45].*)	case "$optimize$ccflags" in
-+[456789].*|[1-9][0-9]*)	case "$optimize$ccflags" in
- 	*-O*)	case "$ccflags$cppsymbols" in
- 		*_FORTIFY_SOURCE=*) # Don't add it again.
- 			echo "You seem to have -D_FORTIFY_SOURCE already, not adding it." >&4
-diff --git a/cpan/Time-Local/t/Local.t b/cpan/Time-Local/t/Local.t
-index 472e71a..0a852a0 100644
---- a/cpan/Time-Local/t/Local.t
-+++ b/cpan/Time-Local/t/Local.t
-@@ -91,7 +91,7 @@ for (@time, @neg_time) {
- 
-         # Test timelocal()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timelocal($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = localtime($time);
-@@ -107,7 +107,7 @@ for (@time, @neg_time) {
- 
-         # Test timegm()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timegm($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = gmtime($time);
-@@ -125,7 +125,6 @@ for (@time, @neg_time) {
- 
- for (@bad_time) {
-     my($year, $mon, $mday, $hour, $min, $sec) = @$_;
--    $year -= 1900;
-     $mon--;
- 
-     eval { timegm($sec,$min,$hour,$mday,$mon,$year) };
-@@ -134,14 +133,14 @@ for (@bad_time) {
- }
- 
- {
--    is(timelocal(0,0,1,1,0,90) - timelocal(0,0,0,1,0,90), 3600,
-+    is(timelocal(0,0,1,1,0,1990) - timelocal(0,0,0,1,0,1990), 3600,
-        'one hour difference between two calls to timelocal');
- 
--    is(timelocal(1,2,3,1,0,100) - timelocal(1,2,3,31,11,99), 24 * 3600,
-+    is(timelocal(1,2,3,1,0,2000) - timelocal(1,2,3,31,11,1999), 24 * 3600,
-        'one day difference between two calls to timelocal');
- 
-     # Diff beween Jan 1, 1980 and Mar 1, 1980 = (31 + 29 = 60 days)
--    is(timegm(0,0,0, 1, 2, 80) - timegm(0,0,0, 1, 0, 80), 60 * 24 * 3600,
-+    is(timegm(0,0,0, 1, 2, 1980) - timegm(0,0,0, 1, 0, 1980), 60 * 24 * 3600,
-        '60 day difference between two calls to timegm');
- }
- 
-diff --git a/hints/linux.sh b/hints/linux.sh
-index fb5a46e..c749f0f 100644
---- a/hints/linux.sh
-+++ b/hints/linux.sh
-@@ -85,7 +85,7 @@ uname_minus_m="${uname_minus_m:-"$targetarch"}"
- 
- # Check if we're about to use Intel's ICC compiler
- case "`${cc:-cc} -V 2>&1`" in
--*"Intel(R) C++ Compiler"*|*"Intel(R) C Compiler"*)
-+*"Intel(R) C"*" Compiler"*)
-     # record the version, formats:
-     # icc (ICC) 10.1 20080801
-     # icpc (ICC) 10.1 20080801
-@@ -165,6 +165,9 @@ esac
- # plibpth to bypass this check.
- if [ -x /usr/bin/gcc ] ; then
-     gcc=/usr/bin/gcc
-+# clang also provides -print-search-dirs
-+elif ${cc:-cc} --version 2>/dev/null | grep -q '^clang ' ; then
-+    gcc=${cc:-cc}
- else
-     gcc=gcc
- fi
-@@ -178,6 +181,16 @@ case "$plibpth" in
-     ;;
- esac
- 
-+# For the musl libc, perl should #define _GNU_SOURCE.  Otherwise, some
-+# available functions, like memem, won't be used.  See the discussion in
-+# [perl #133760].  musl doesn't offer an easy way to identify it, but,
-+# at least on alpine linux, the ldd --version output contains the
-+# string 'musl.'
-+case `ldd --version 2>&1` in
-+    musl*)  ccflags="$ccflags -D_GNU_SOURCE" ;;
-+        *) ;;
-+esac
-+
- # libquadmath is sometimes installed as gcc internal library,
- # so contrary to our usual policy of *not* looking at gcc internal
- # directories we now *do* look at them, in case they contain
-@@ -221,92 +234,6 @@ case "$libc" in
-     ;;
- esac
- 
--# Are we using ELF?  Thanks to Kenneth Albanowski <kjahds@kjahds.com>
--# for this test.
--cat >try.c <<'EOM'
--/* Test for whether ELF binaries are produced */
--#include <fcntl.h>
--#include <stdlib.h>
--#include <unistd.h>
--main() {
--	char buffer[4];
--	int i=open("a.out",O_RDONLY);
--	if(i==-1)
--		exit(1); /* fail */
--	if(read(i,&buffer[0],4)<4)
--		exit(1); /* fail */
--	if(buffer[0] != 127 || buffer[1] != 'E' ||
--           buffer[2] != 'L' || buffer[3] != 'F')
--		exit(1); /* fail */
--	exit(0); /* succeed (yes, it's ELF) */
--}
--EOM
--if ${cc:-gcc} $ccflags $ldflags try.c >/dev/null 2>&1 && $run ./a.out; then
--    cat <<'EOM' >&4
--
--You appear to have ELF support.  I'll try to use it for dynamic loading.
--If dynamic loading doesn't work, read hints/linux.sh for further information.
--EOM
--
--else
--    cat <<'EOM' >&4
--
--You don't have an ELF gcc.  I will use dld if possible.  If you are
--using a version of DLD earlier than 3.2.6, or don't have it at all, you
--should probably upgrade. If you are forced to use 3.2.4, you should
--uncomment a couple of lines in hints/linux.sh and restart Configure so
--that shared libraries will be disallowed.
--
--EOM
--    lddlflags="-r $lddlflags"
--    # These empty values are so that Configure doesn't put in the
--    # Linux ELF values.
--    ccdlflags=' '
--    cccdlflags=' '
--    ccflags="-DOVR_DBL_DIG=14 $ccflags"
--    so='sa'
--    dlext='o'
--    nm_so_opt=' '
--    ## If you are using DLD 3.2.4 which does not support shared libs,
--    ## uncomment the next two lines:
--    #ldflags="-static"
--    #so='none'
--
--	# In addition, on some systems there is a problem with perl and NDBM
--	# which causes AnyDBM and NDBM_File to lock up. This is evidenced
--	# in the tests as AnyDBM just freezing.  Apparently, this only
--	# happens on a.out systems, so we disable NDBM for all a.out linux
--	# systems.  If someone can suggest a more robust test
--	#  that would be appreciated.
--	#
--	# More info:
--	# Date: Wed, 7 Feb 1996 03:21:04 +0900
--	# From: Jeffrey Friedl <jfriedl@nff.ncl.omron.co.jp>
--	#
--	# I tried compiling with DBM support and sure enough things locked up
--	# just as advertised. Checking into it, I found that the lockup was
--	# during the call to dbm_open. Not *in* dbm_open -- but between the call
--	# to and the jump into.
--	#
--	# To make a long story short, making sure that the *.a and *.sa pairs of
--	#   /usr/lib/lib{m,db,gdbm}.{a,sa}
--	# were perfectly in sync took care of it.
--	#
--	# This will generate a harmless Whoa There! message
--	case "$d_dbm_open" in
--	'')	cat <<'EOM' >&4
--
--Disabling ndbm.  This will generate a Whoa There message in Configure.
--Read hints/linux.sh for further information.
--EOM
--		# You can override this with Configure -Dd_dbm_open
--		d_dbm_open=undef
--		;;
--	esac
--fi
--
--rm -f try.c a.out
--
- if ${sh:-/bin/sh} -c exit; then
-   echo ''
-   echo 'You appear to have a working bash.  Good.'
-diff --git a/pp.c b/pp.c
-index 3173c5a..f2a37bd 100644
---- a/pp.c
-+++ b/pp.c
-@@ -3624,8 +3624,12 @@ PP(pp_crypt)
- #if defined(__GLIBC__) || defined(__EMX__)
- 	if (PL_reentrant_buffer->_crypt_struct_buffer) {
- 	    PL_reentrant_buffer->_crypt_struct_buffer->initialized = 0;
--	    /* work around glibc-2.2.5 bug */
-+#if (defined(__GLIBC__) && __GLIBC__ == 2) && \
-+    (defined(__GLIBC_MINOR__) && __GLIBC_MINOR__ >= 2 && __GLIBC_MINOR__ < 4)
-+	    /* work around glibc-2.2.5 bug, has been fixed at some
-+	     * time in glibc-2.3.X */
- 	    PL_reentrant_buffer->_crypt_struct_buffer->current_saltbits = 0;
-+#endif
- 	}
- #endif
-     }

5.022.004-main,debugging,longdouble,threaded-bullseye/Dockerfile

@@ -1,59 +0,0 @@
-FROM debian:bullseye-backports
-LABEL maintainer="Ryan Voots <simcop@cpan.org>"
-
-COPY *.patch /usr/src/perl/
-WORKDIR /usr/src/perl
-
-ENV DEBIAN_FRONTEND=noninteractive
-
-RUN perl -i.bak -pE '$x=$_; $x=~s|^deb |deb-src |g;$_.=$x' /etc/apt/sources.list \
-    && apt update \
-    && apt -yq full-upgrade \
-    && apt -yq build-dep perl \
-    &&     apt-get install -y --no-install-recommends \
-       bzip2 \
-       ca-certificates \
-       # cpio \
-       curl \
-       dpkg-dev \
-       # file \
-       gcc \
-       # g++ \
-       libbz2-dev \
-       libdb-dev \
-       libc6-dev \
-       libgdbm-dev \
-       liblzma-dev \
-       make \
-       netbase \
-       patch \
-       procps \
-       zlib1g-dev \
-       xz-utils \
-    && curl -SL https://www.cpan.org/src/5.0/perl-5.22.4.tar.xz -o perl-5.22.4.tar.xz \
-    && echo '713243dce27d7aa0bdbf52b2070de5ce449f9ffbcc14a93efbc6f2beff0f5ce8 *perl-5.22.4.tar.xz' | sha256sum -c -
-RUN tar --strip-components=1 -xaf perl-5.22.4.tar.xz -C /usr/src/perl \
-    && rm perl-5.22.4.tar.xz \
-    && cat *.patch | patch -p1 \
-    && echo 'print "1..0 # Skipped: Tests are invalid"' > /usr/src/perl/ext/GDBM_File/t/fatal.t
-RUN gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)" \
-    && archBits="$(dpkg-architecture --query DEB_BUILD_ARCH_BITS)" \
-    && archFlag="$([ "$archBits" = '64' ] && echo '-Duse64bitall' || echo '-Duse64bitint')" \
-    && ./Configure -Darchname="$gnuArch" "$archFlag" -Accflags=-ggdb -DDEBUGGING -Dusethreads -Duselongdouble -Duseshrplib -Dvendorprefix=/usr/local -Aldflags='-Wl,-z,now -Wl,-zrelro -Wl,-z,noexecstack' -Accflags='-fpie -fPIC -fstack-protector-all -pie -D_FORTIFY_SOURCE=2' -Duseshrplib  -des \
-    && make -j$(nproc) \
-    && TEST_JOBS=$(nproc) make test_harness
-RUN make install \
-    && cd /usr/src \
-    && curl -LO https://www.cpan.org/authors/id/M/MI/MIYAGAWA/App-cpanminus-1.7044.tar.gz \
-    && echo '9b60767fe40752ef7a9d3f13f19060a63389a5c23acc3e9827e19b75500f81f3 *App-cpanminus-1.7044.tar.gz' | sha256sum -c - \
-    && tar -xzf App-cpanminus-1.7044.tar.gz && cd App-cpanminus-1.7044 && perl bin/cpanm . && cd /root \
-    && savedPackages="make netbase" \
-    && apt-mark auto '.*' > /dev/null \
-    && apt-mark manual $savedPackages \
-    && apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false \
-    && rm -fr /var/cache/apt/* /var/lib/apt/lists/* \
-    && rm -fr ./cpanm /root/.cpanm /usr/src/perl /usr/src/App-cpanminus-1.7044* /tmp/*
-
-WORKDIR /
-
-CMD ["perl5.22.4","-de0"]

5.022.004-main,debugging,longdouble,threaded-buster/DevelPatchPerl.patch

@@ -1,264 +0,0 @@
-diff --git a/Configure b/Configure
-index 5f5f279..8ce5cbb 100755
---- a/Configure
-+++ b/Configure
-@@ -4658,7 +4658,7 @@ else
- fi
- $rm -f try try.*
- case "$gccversion" in
--1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-+1.*) cpp=`./loc gcc-cpp $cpp $pth` ;;
- esac
- case "$gccversion" in
- '') gccosandvers='' ;;
-@@ -4698,7 +4698,7 @@ esac
- # gcc 3.* complain about adding -Idirectories that they already know about,
- # so we will take those off from locincpth.
- case "$gccversion" in
--3*)
-+3.*)
-     echo "main(){}">try.c
-     for incdir in $locincpth; do
-        warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
-@@ -5410,13 +5410,13 @@ fi
- case "$hint" in
- default|recommended)
- 	case "$gccversion" in
--	1*) dflt="$dflt -fpcc-struct-return" ;;
-+	1.*) dflt="$dflt -fpcc-struct-return" ;;
- 	esac
- 	case "$optimize:$DEBUGGING" in
- 	*-g*:old) dflt="$dflt -DDEBUGGING";;
- 	esac
- 	case "$gccversion" in
--	2*) if $test -d /etc/conf/kconfig.d &&
-+	2.*) if $test -d /etc/conf/kconfig.d &&
- 			$contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- 		then
- 			# Interactive Systems (ISC) POSIX mode.
-@@ -5425,7 +5425,7 @@ default|recommended)
- 		;;
- 	esac
- 	case "$gccversion" in
--	1*) ;;
-+	1.*) ;;
- 	2.[0-8]*) ;;
- 	?*)	set strict-aliasing -fno-strict-aliasing
- 		eval $checkccflag
-@@ -5534,7 +5534,7 @@ case "$cppflags" in
- *)  cppflags="$cppflags $ccflags" ;;
- esac
- case "$gccversion" in
--1*) cppflags="$cppflags -D__GNUC__"
-+1.*) cppflags="$cppflags -D__GNUC__"
- esac
- case "$mips_type" in
- '');;
-@@ -23010,7 +23010,7 @@ fi
- 
- : add -D_FORTIFY_SOURCE if feasible and not already there
- case "$gccversion" in
--[45].*)	case "$optimize$ccflags" in
-+[456789].*|[1-9][0-9]*)	case "$optimize$ccflags" in
- 	*-O*)	case "$ccflags$cppsymbols" in
- 		*_FORTIFY_SOURCE=*) # Don't add it again.
- 			echo "You seem to have -D_FORTIFY_SOURCE already, not adding it." >&4
-diff --git a/cpan/Time-Local/t/Local.t b/cpan/Time-Local/t/Local.t
-index 472e71a..0a852a0 100644
---- a/cpan/Time-Local/t/Local.t
-+++ b/cpan/Time-Local/t/Local.t
-@@ -91,7 +91,7 @@ for (@time, @neg_time) {
- 
-         # Test timelocal()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timelocal($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = localtime($time);
-@@ -107,7 +107,7 @@ for (@time, @neg_time) {
- 
-         # Test timegm()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timegm($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = gmtime($time);
-@@ -125,7 +125,6 @@ for (@time, @neg_time) {
- 
- for (@bad_time) {
-     my($year, $mon, $mday, $hour, $min, $sec) = @$_;
--    $year -= 1900;
-     $mon--;
- 
-     eval { timegm($sec,$min,$hour,$mday,$mon,$year) };
-@@ -134,14 +133,14 @@ for (@bad_time) {
- }
- 
- {
--    is(timelocal(0,0,1,1,0,90) - timelocal(0,0,0,1,0,90), 3600,
-+    is(timelocal(0,0,1,1,0,1990) - timelocal(0,0,0,1,0,1990), 3600,
-        'one hour difference between two calls to timelocal');
- 
--    is(timelocal(1,2,3,1,0,100) - timelocal(1,2,3,31,11,99), 24 * 3600,
-+    is(timelocal(1,2,3,1,0,2000) - timelocal(1,2,3,31,11,1999), 24 * 3600,
-        'one day difference between two calls to timelocal');
- 
-     # Diff beween Jan 1, 1980 and Mar 1, 1980 = (31 + 29 = 60 days)
--    is(timegm(0,0,0, 1, 2, 80) - timegm(0,0,0, 1, 0, 80), 60 * 24 * 3600,
-+    is(timegm(0,0,0, 1, 2, 1980) - timegm(0,0,0, 1, 0, 1980), 60 * 24 * 3600,
-        '60 day difference between two calls to timegm');
- }
- 
-diff --git a/hints/linux.sh b/hints/linux.sh
-index fb5a46e..c749f0f 100644
---- a/hints/linux.sh
-+++ b/hints/linux.sh
-@@ -85,7 +85,7 @@ uname_minus_m="${uname_minus_m:-"$targetarch"}"
- 
- # Check if we're about to use Intel's ICC compiler
- case "`${cc:-cc} -V 2>&1`" in
--*"Intel(R) C++ Compiler"*|*"Intel(R) C Compiler"*)
-+*"Intel(R) C"*" Compiler"*)
-     # record the version, formats:
-     # icc (ICC) 10.1 20080801
-     # icpc (ICC) 10.1 20080801
-@@ -165,6 +165,9 @@ esac
- # plibpth to bypass this check.
- if [ -x /usr/bin/gcc ] ; then
-     gcc=/usr/bin/gcc
-+# clang also provides -print-search-dirs
-+elif ${cc:-cc} --version 2>/dev/null | grep -q '^clang ' ; then
-+    gcc=${cc:-cc}
- else
-     gcc=gcc
- fi
-@@ -178,6 +181,16 @@ case "$plibpth" in
-     ;;
- esac
- 
-+# For the musl libc, perl should #define _GNU_SOURCE.  Otherwise, some
-+# available functions, like memem, won't be used.  See the discussion in
-+# [perl #133760].  musl doesn't offer an easy way to identify it, but,
-+# at least on alpine linux, the ldd --version output contains the
-+# string 'musl.'
-+case `ldd --version 2>&1` in
-+    musl*)  ccflags="$ccflags -D_GNU_SOURCE" ;;
-+        *) ;;
-+esac
-+
- # libquadmath is sometimes installed as gcc internal library,
- # so contrary to our usual policy of *not* looking at gcc internal
- # directories we now *do* look at them, in case they contain
-@@ -221,92 +234,6 @@ case "$libc" in
-     ;;
- esac
- 
--# Are we using ELF?  Thanks to Kenneth Albanowski <kjahds@kjahds.com>
--# for this test.
--cat >try.c <<'EOM'
--/* Test for whether ELF binaries are produced */
--#include <fcntl.h>
--#include <stdlib.h>
--#include <unistd.h>
--main() {
--	char buffer[4];
--	int i=open("a.out",O_RDONLY);
--	if(i==-1)
--		exit(1); /* fail */
--	if(read(i,&buffer[0],4)<4)
--		exit(1); /* fail */
--	if(buffer[0] != 127 || buffer[1] != 'E' ||
--           buffer[2] != 'L' || buffer[3] != 'F')
--		exit(1); /* fail */
--	exit(0); /* succeed (yes, it's ELF) */
--}
--EOM
--if ${cc:-gcc} $ccflags $ldflags try.c >/dev/null 2>&1 && $run ./a.out; then
--    cat <<'EOM' >&4
--
--You appear to have ELF support.  I'll try to use it for dynamic loading.
--If dynamic loading doesn't work, read hints/linux.sh for further information.
--EOM
--
--else
--    cat <<'EOM' >&4
--
--You don't have an ELF gcc.  I will use dld if possible.  If you are
--using a version of DLD earlier than 3.2.6, or don't have it at all, you
--should probably upgrade. If you are forced to use 3.2.4, you should
--uncomment a couple of lines in hints/linux.sh and restart Configure so
--that shared libraries will be disallowed.
--
--EOM
--    lddlflags="-r $lddlflags"
--    # These empty values are so that Configure doesn't put in the
--    # Linux ELF values.
--    ccdlflags=' '
--    cccdlflags=' '
--    ccflags="-DOVR_DBL_DIG=14 $ccflags"
--    so='sa'
--    dlext='o'
--    nm_so_opt=' '
--    ## If you are using DLD 3.2.4 which does not support shared libs,
--    ## uncomment the next two lines:
--    #ldflags="-static"
--    #so='none'
--
--	# In addition, on some systems there is a problem with perl and NDBM
--	# which causes AnyDBM and NDBM_File to lock up. This is evidenced
--	# in the tests as AnyDBM just freezing.  Apparently, this only
--	# happens on a.out systems, so we disable NDBM for all a.out linux
--	# systems.  If someone can suggest a more robust test
--	#  that would be appreciated.
--	#
--	# More info:
--	# Date: Wed, 7 Feb 1996 03:21:04 +0900
--	# From: Jeffrey Friedl <jfriedl@nff.ncl.omron.co.jp>
--	#
--	# I tried compiling with DBM support and sure enough things locked up
--	# just as advertised. Checking into it, I found that the lockup was
--	# during the call to dbm_open. Not *in* dbm_open -- but between the call
--	# to and the jump into.
--	#
--	# To make a long story short, making sure that the *.a and *.sa pairs of
--	#   /usr/lib/lib{m,db,gdbm}.{a,sa}
--	# were perfectly in sync took care of it.
--	#
--	# This will generate a harmless Whoa There! message
--	case "$d_dbm_open" in
--	'')	cat <<'EOM' >&4
--
--Disabling ndbm.  This will generate a Whoa There message in Configure.
--Read hints/linux.sh for further information.
--EOM
--		# You can override this with Configure -Dd_dbm_open
--		d_dbm_open=undef
--		;;
--	esac
--fi
--
--rm -f try.c a.out
--
- if ${sh:-/bin/sh} -c exit; then
-   echo ''
-   echo 'You appear to have a working bash.  Good.'
-diff --git a/pp.c b/pp.c
-index 3173c5a..f2a37bd 100644
---- a/pp.c
-+++ b/pp.c
-@@ -3624,8 +3624,12 @@ PP(pp_crypt)
- #if defined(__GLIBC__) || defined(__EMX__)
- 	if (PL_reentrant_buffer->_crypt_struct_buffer) {
- 	    PL_reentrant_buffer->_crypt_struct_buffer->initialized = 0;
--	    /* work around glibc-2.2.5 bug */
-+#if (defined(__GLIBC__) && __GLIBC__ == 2) && \
-+    (defined(__GLIBC_MINOR__) && __GLIBC_MINOR__ >= 2 && __GLIBC_MINOR__ < 4)
-+	    /* work around glibc-2.2.5 bug, has been fixed at some
-+	     * time in glibc-2.3.X */
- 	    PL_reentrant_buffer->_crypt_struct_buffer->current_saltbits = 0;
-+#endif
- 	}
- #endif
-     }

5.022.004-main,debugging,longdouble,threaded-buster/Dockerfile

@@ -1,59 +0,0 @@
-FROM debian:buster-backports
-LABEL maintainer="Ryan Voots <simcop@cpan.org>"
-
-COPY *.patch /usr/src/perl/
-WORKDIR /usr/src/perl
-
-ENV DEBIAN_FRONTEND=noninteractive
-
-RUN perl -i.bak -pE '$x=$_; $x=~s|^deb |deb-src |g;$_.=$x' /etc/apt/sources.list \
-    && apt update \
-    && apt -yq full-upgrade \
-    && apt -yq build-dep perl \
-    &&     apt-get install -y --no-install-recommends \
-       bzip2 \
-       ca-certificates \
-       # cpio \
-       curl \
-       dpkg-dev \
-       # file \
-       gcc \
-       # g++ \
-       libbz2-dev \
-       libdb-dev \
-       libc6-dev \
-       libgdbm-dev \
-       liblzma-dev \
-       make \
-       netbase \
-       patch \
-       procps \
-       zlib1g-dev \
-       xz-utils \
-    && curl -SL https://www.cpan.org/src/5.0/perl-5.22.4.tar.xz -o perl-5.22.4.tar.xz \
-    && echo '713243dce27d7aa0bdbf52b2070de5ce449f9ffbcc14a93efbc6f2beff0f5ce8 *perl-5.22.4.tar.xz' | sha256sum -c -
-RUN tar --strip-components=1 -xaf perl-5.22.4.tar.xz -C /usr/src/perl \
-    && rm perl-5.22.4.tar.xz \
-    && cat *.patch | patch -p1 \
-    && echo 'print "1..0 # Skipped: Tests are invalid"' > /usr/src/perl/ext/GDBM_File/t/fatal.t
-RUN gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)" \
-    && archBits="$(dpkg-architecture --query DEB_BUILD_ARCH_BITS)" \
-    && archFlag="$([ "$archBits" = '64' ] && echo '-Duse64bitall' || echo '-Duse64bitint')" \
-    && ./Configure -Darchname="$gnuArch" "$archFlag" -Accflags=-ggdb -DDEBUGGING -Dusethreads -Duselongdouble -Duseshrplib -Dvendorprefix=/usr/local -Aldflags='-Wl,-z,now -Wl,-zrelro -Wl,-z,noexecstack' -Accflags='-fpie -fPIC -fstack-protector-all -pie -D_FORTIFY_SOURCE=2' -Duseshrplib  -des \
-    && make -j$(nproc) \
-    && TEST_JOBS=$(nproc) make test_harness
-RUN make install \
-    && cd /usr/src \
-    && curl -LO https://www.cpan.org/authors/id/M/MI/MIYAGAWA/App-cpanminus-1.7044.tar.gz \
-    && echo '9b60767fe40752ef7a9d3f13f19060a63389a5c23acc3e9827e19b75500f81f3 *App-cpanminus-1.7044.tar.gz' | sha256sum -c - \
-    && tar -xzf App-cpanminus-1.7044.tar.gz && cd App-cpanminus-1.7044 && perl bin/cpanm . && cd /root \
-    && savedPackages="make netbase" \
-    && apt-mark auto '.*' > /dev/null \
-    && apt-mark manual $savedPackages \
-    && apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false \
-    && rm -fr /var/cache/apt/* /var/lib/apt/lists/* \
-    && rm -fr ./cpanm /root/.cpanm /usr/src/perl /usr/src/App-cpanminus-1.7044* /tmp/*
-
-WORKDIR /
-
-CMD ["perl5.22.4","-de0"]

5.022.004-main,debugging,longdouble-bullseye/DevelPatchPerl.patch

@@ -1,264 +0,0 @@
-diff --git a/Configure b/Configure
-index 5f5f279..8ce5cbb 100755
---- a/Configure
-+++ b/Configure
-@@ -4658,7 +4658,7 @@ else
- fi
- $rm -f try try.*
- case "$gccversion" in
--1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-+1.*) cpp=`./loc gcc-cpp $cpp $pth` ;;
- esac
- case "$gccversion" in
- '') gccosandvers='' ;;
-@@ -4698,7 +4698,7 @@ esac
- # gcc 3.* complain about adding -Idirectories that they already know about,
- # so we will take those off from locincpth.
- case "$gccversion" in
--3*)
-+3.*)
-     echo "main(){}">try.c
-     for incdir in $locincpth; do
-        warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
-@@ -5410,13 +5410,13 @@ fi
- case "$hint" in
- default|recommended)
- 	case "$gccversion" in
--	1*) dflt="$dflt -fpcc-struct-return" ;;
-+	1.*) dflt="$dflt -fpcc-struct-return" ;;
- 	esac
- 	case "$optimize:$DEBUGGING" in
- 	*-g*:old) dflt="$dflt -DDEBUGGING";;
- 	esac
- 	case "$gccversion" in
--	2*) if $test -d /etc/conf/kconfig.d &&
-+	2.*) if $test -d /etc/conf/kconfig.d &&
- 			$contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- 		then
- 			# Interactive Systems (ISC) POSIX mode.
-@@ -5425,7 +5425,7 @@ default|recommended)
- 		;;
- 	esac
- 	case "$gccversion" in
--	1*) ;;
-+	1.*) ;;
- 	2.[0-8]*) ;;
- 	?*)	set strict-aliasing -fno-strict-aliasing
- 		eval $checkccflag
-@@ -5534,7 +5534,7 @@ case "$cppflags" in
- *)  cppflags="$cppflags $ccflags" ;;
- esac
- case "$gccversion" in
--1*) cppflags="$cppflags -D__GNUC__"
-+1.*) cppflags="$cppflags -D__GNUC__"
- esac
- case "$mips_type" in
- '');;
-@@ -23010,7 +23010,7 @@ fi
- 
- : add -D_FORTIFY_SOURCE if feasible and not already there
- case "$gccversion" in
--[45].*)	case "$optimize$ccflags" in
-+[456789].*|[1-9][0-9]*)	case "$optimize$ccflags" in
- 	*-O*)	case "$ccflags$cppsymbols" in
- 		*_FORTIFY_SOURCE=*) # Don't add it again.
- 			echo "You seem to have -D_FORTIFY_SOURCE already, not adding it." >&4
-diff --git a/cpan/Time-Local/t/Local.t b/cpan/Time-Local/t/Local.t
-index 472e71a..0a852a0 100644
---- a/cpan/Time-Local/t/Local.t
-+++ b/cpan/Time-Local/t/Local.t
-@@ -91,7 +91,7 @@ for (@time, @neg_time) {
- 
-         # Test timelocal()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timelocal($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = localtime($time);
-@@ -107,7 +107,7 @@ for (@time, @neg_time) {
- 
-         # Test timegm()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timegm($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = gmtime($time);
-@@ -125,7 +125,6 @@ for (@time, @neg_time) {
- 
- for (@bad_time) {
-     my($year, $mon, $mday, $hour, $min, $sec) = @$_;
--    $year -= 1900;
-     $mon--;
- 
-     eval { timegm($sec,$min,$hour,$mday,$mon,$year) };
-@@ -134,14 +133,14 @@ for (@bad_time) {
- }
- 
- {
--    is(timelocal(0,0,1,1,0,90) - timelocal(0,0,0,1,0,90), 3600,
-+    is(timelocal(0,0,1,1,0,1990) - timelocal(0,0,0,1,0,1990), 3600,
-        'one hour difference between two calls to timelocal');
- 
--    is(timelocal(1,2,3,1,0,100) - timelocal(1,2,3,31,11,99), 24 * 3600,
-+    is(timelocal(1,2,3,1,0,2000) - timelocal(1,2,3,31,11,1999), 24 * 3600,
-        'one day difference between two calls to timelocal');
- 
-     # Diff beween Jan 1, 1980 and Mar 1, 1980 = (31 + 29 = 60 days)
--    is(timegm(0,0,0, 1, 2, 80) - timegm(0,0,0, 1, 0, 80), 60 * 24 * 3600,
-+    is(timegm(0,0,0, 1, 2, 1980) - timegm(0,0,0, 1, 0, 1980), 60 * 24 * 3600,
-        '60 day difference between two calls to timegm');
- }
- 
-diff --git a/hints/linux.sh b/hints/linux.sh
-index fb5a46e..c749f0f 100644
---- a/hints/linux.sh
-+++ b/hints/linux.sh
-@@ -85,7 +85,7 @@ uname_minus_m="${uname_minus_m:-"$targetarch"}"
- 
- # Check if we're about to use Intel's ICC compiler
- case "`${cc:-cc} -V 2>&1`" in
--*"Intel(R) C++ Compiler"*|*"Intel(R) C Compiler"*)
-+*"Intel(R) C"*" Compiler"*)
-     # record the version, formats:
-     # icc (ICC) 10.1 20080801
-     # icpc (ICC) 10.1 20080801
-@@ -165,6 +165,9 @@ esac
- # plibpth to bypass this check.
- if [ -x /usr/bin/gcc ] ; then
-     gcc=/usr/bin/gcc
-+# clang also provides -print-search-dirs
-+elif ${cc:-cc} --version 2>/dev/null | grep -q '^clang ' ; then
-+    gcc=${cc:-cc}
- else
-     gcc=gcc
- fi
-@@ -178,6 +181,16 @@ case "$plibpth" in
-     ;;
- esac
- 
-+# For the musl libc, perl should #define _GNU_SOURCE.  Otherwise, some
-+# available functions, like memem, won't be used.  See the discussion in
-+# [perl #133760].  musl doesn't offer an easy way to identify it, but,
-+# at least on alpine linux, the ldd --version output contains the
-+# string 'musl.'
-+case `ldd --version 2>&1` in
-+    musl*)  ccflags="$ccflags -D_GNU_SOURCE" ;;
-+        *) ;;
-+esac
-+
- # libquadmath is sometimes installed as gcc internal library,
- # so contrary to our usual policy of *not* looking at gcc internal
- # directories we now *do* look at them, in case they contain
-@@ -221,92 +234,6 @@ case "$libc" in
-     ;;
- esac
- 
--# Are we using ELF?  Thanks to Kenneth Albanowski <kjahds@kjahds.com>
--# for this test.
--cat >try.c <<'EOM'
--/* Test for whether ELF binaries are produced */
--#include <fcntl.h>
--#include <stdlib.h>
--#include <unistd.h>
--main() {
--	char buffer[4];
--	int i=open("a.out",O_RDONLY);
--	if(i==-1)
--		exit(1); /* fail */
--	if(read(i,&buffer[0],4)<4)
--		exit(1); /* fail */
--	if(buffer[0] != 127 || buffer[1] != 'E' ||
--           buffer[2] != 'L' || buffer[3] != 'F')
--		exit(1); /* fail */
--	exit(0); /* succeed (yes, it's ELF) */
--}
--EOM
--if ${cc:-gcc} $ccflags $ldflags try.c >/dev/null 2>&1 && $run ./a.out; then
--    cat <<'EOM' >&4
--
--You appear to have ELF support.  I'll try to use it for dynamic loading.
--If dynamic loading doesn't work, read hints/linux.sh for further information.
--EOM
--
--else
--    cat <<'EOM' >&4
--
--You don't have an ELF gcc.  I will use dld if possible.  If you are
--using a version of DLD earlier than 3.2.6, or don't have it at all, you
--should probably upgrade. If you are forced to use 3.2.4, you should
--uncomment a couple of lines in hints/linux.sh and restart Configure so
--that shared libraries will be disallowed.
--
--EOM
--    lddlflags="-r $lddlflags"
--    # These empty values are so that Configure doesn't put in the
--    # Linux ELF values.
--    ccdlflags=' '
--    cccdlflags=' '
--    ccflags="-DOVR_DBL_DIG=14 $ccflags"
--    so='sa'
--    dlext='o'
--    nm_so_opt=' '
--    ## If you are using DLD 3.2.4 which does not support shared libs,
--    ## uncomment the next two lines:
--    #ldflags="-static"
--    #so='none'
--
--	# In addition, on some systems there is a problem with perl and NDBM
--	# which causes AnyDBM and NDBM_File to lock up. This is evidenced
--	# in the tests as AnyDBM just freezing.  Apparently, this only
--	# happens on a.out systems, so we disable NDBM for all a.out linux
--	# systems.  If someone can suggest a more robust test
--	#  that would be appreciated.
--	#
--	# More info:
--	# Date: Wed, 7 Feb 1996 03:21:04 +0900
--	# From: Jeffrey Friedl <jfriedl@nff.ncl.omron.co.jp>
--	#
--	# I tried compiling with DBM support and sure enough things locked up
--	# just as advertised. Checking into it, I found that the lockup was
--	# during the call to dbm_open. Not *in* dbm_open -- but between the call
--	# to and the jump into.
--	#
--	# To make a long story short, making sure that the *.a and *.sa pairs of
--	#   /usr/lib/lib{m,db,gdbm}.{a,sa}
--	# were perfectly in sync took care of it.
--	#
--	# This will generate a harmless Whoa There! message
--	case "$d_dbm_open" in
--	'')	cat <<'EOM' >&4
--
--Disabling ndbm.  This will generate a Whoa There message in Configure.
--Read hints/linux.sh for further information.
--EOM
--		# You can override this with Configure -Dd_dbm_open
--		d_dbm_open=undef
--		;;
--	esac
--fi
--
--rm -f try.c a.out
--
- if ${sh:-/bin/sh} -c exit; then
-   echo ''
-   echo 'You appear to have a working bash.  Good.'
-diff --git a/pp.c b/pp.c
-index 3173c5a..f2a37bd 100644
---- a/pp.c
-+++ b/pp.c
-@@ -3624,8 +3624,12 @@ PP(pp_crypt)
- #if defined(__GLIBC__) || defined(__EMX__)
- 	if (PL_reentrant_buffer->_crypt_struct_buffer) {
- 	    PL_reentrant_buffer->_crypt_struct_buffer->initialized = 0;
--	    /* work around glibc-2.2.5 bug */
-+#if (defined(__GLIBC__) && __GLIBC__ == 2) && \
-+    (defined(__GLIBC_MINOR__) && __GLIBC_MINOR__ >= 2 && __GLIBC_MINOR__ < 4)
-+	    /* work around glibc-2.2.5 bug, has been fixed at some
-+	     * time in glibc-2.3.X */
- 	    PL_reentrant_buffer->_crypt_struct_buffer->current_saltbits = 0;
-+#endif
- 	}
- #endif
-     }

5.022.004-main,debugging,longdouble-bullseye/Dockerfile

@@ -1,59 +0,0 @@
-FROM debian:bullseye-backports
-LABEL maintainer="Ryan Voots <simcop@cpan.org>"
-
-COPY *.patch /usr/src/perl/
-WORKDIR /usr/src/perl
-
-ENV DEBIAN_FRONTEND=noninteractive
-
-RUN perl -i.bak -pE '$x=$_; $x=~s|^deb |deb-src |g;$_.=$x' /etc/apt/sources.list \
-    && apt update \
-    && apt -yq full-upgrade \
-    && apt -yq build-dep perl \
-    &&     apt-get install -y --no-install-recommends \
-       bzip2 \
-       ca-certificates \
-       # cpio \
-       curl \
-       dpkg-dev \
-       # file \
-       gcc \
-       # g++ \
-       libbz2-dev \
-       libdb-dev \
-       libc6-dev \
-       libgdbm-dev \
-       liblzma-dev \
-       make \
-       netbase \
-       patch \
-       procps \
-       zlib1g-dev \
-       xz-utils \
-    && curl -SL https://www.cpan.org/src/5.0/perl-5.22.4.tar.xz -o perl-5.22.4.tar.xz \
-    && echo '713243dce27d7aa0bdbf52b2070de5ce449f9ffbcc14a93efbc6f2beff0f5ce8 *perl-5.22.4.tar.xz' | sha256sum -c -
-RUN tar --strip-components=1 -xaf perl-5.22.4.tar.xz -C /usr/src/perl \
-    && rm perl-5.22.4.tar.xz \
-    && cat *.patch | patch -p1 \
-    && echo 'print "1..0 # Skipped: Tests are invalid"' > /usr/src/perl/ext/GDBM_File/t/fatal.t
-RUN gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)" \
-    && archBits="$(dpkg-architecture --query DEB_BUILD_ARCH_BITS)" \
-    && archFlag="$([ "$archBits" = '64' ] && echo '-Duse64bitall' || echo '-Duse64bitint')" \
-    && ./Configure -Darchname="$gnuArch" "$archFlag" -Accflags=-ggdb -DDEBUGGING -Duselongdouble -Duseshrplib -Dvendorprefix=/usr/local -Aldflags='-Wl,-z,now -Wl,-zrelro -Wl,-z,noexecstack' -Accflags='-fpie -fPIC -fstack-protector-all -pie -D_FORTIFY_SOURCE=2' -Duseshrplib  -des \
-    && make -j$(nproc) \
-    && TEST_JOBS=$(nproc) make test_harness
-RUN make install \
-    && cd /usr/src \
-    && curl -LO https://www.cpan.org/authors/id/M/MI/MIYAGAWA/App-cpanminus-1.7044.tar.gz \
-    && echo '9b60767fe40752ef7a9d3f13f19060a63389a5c23acc3e9827e19b75500f81f3 *App-cpanminus-1.7044.tar.gz' | sha256sum -c - \
-    && tar -xzf App-cpanminus-1.7044.tar.gz && cd App-cpanminus-1.7044 && perl bin/cpanm . && cd /root \
-    && savedPackages="make netbase" \
-    && apt-mark auto '.*' > /dev/null \
-    && apt-mark manual $savedPackages \
-    && apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false \
-    && rm -fr /var/cache/apt/* /var/lib/apt/lists/* \
-    && rm -fr ./cpanm /root/.cpanm /usr/src/perl /usr/src/App-cpanminus-1.7044* /tmp/*
-
-WORKDIR /
-
-CMD ["perl5.22.4","-de0"]

5.022.004-main,debugging,longdouble-buster/DevelPatchPerl.patch

@@ -1,264 +0,0 @@
-diff --git a/Configure b/Configure
-index 5f5f279..8ce5cbb 100755
---- a/Configure
-+++ b/Configure
-@@ -4658,7 +4658,7 @@ else
- fi
- $rm -f try try.*
- case "$gccversion" in
--1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-+1.*) cpp=`./loc gcc-cpp $cpp $pth` ;;
- esac
- case "$gccversion" in
- '') gccosandvers='' ;;
-@@ -4698,7 +4698,7 @@ esac
- # gcc 3.* complain about adding -Idirectories that they already know about,
- # so we will take those off from locincpth.
- case "$gccversion" in
--3*)
-+3.*)
-     echo "main(){}">try.c
-     for incdir in $locincpth; do
-        warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
-@@ -5410,13 +5410,13 @@ fi
- case "$hint" in
- default|recommended)
- 	case "$gccversion" in
--	1*) dflt="$dflt -fpcc-struct-return" ;;
-+	1.*) dflt="$dflt -fpcc-struct-return" ;;
- 	esac
- 	case "$optimize:$DEBUGGING" in
- 	*-g*:old) dflt="$dflt -DDEBUGGING";;
- 	esac
- 	case "$gccversion" in
--	2*) if $test -d /etc/conf/kconfig.d &&
-+	2.*) if $test -d /etc/conf/kconfig.d &&
- 			$contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- 		then
- 			# Interactive Systems (ISC) POSIX mode.
-@@ -5425,7 +5425,7 @@ default|recommended)
- 		;;
- 	esac
- 	case "$gccversion" in
--	1*) ;;
-+	1.*) ;;
- 	2.[0-8]*) ;;
- 	?*)	set strict-aliasing -fno-strict-aliasing
- 		eval $checkccflag
-@@ -5534,7 +5534,7 @@ case "$cppflags" in
- *)  cppflags="$cppflags $ccflags" ;;
- esac
- case "$gccversion" in
--1*) cppflags="$cppflags -D__GNUC__"
-+1.*) cppflags="$cppflags -D__GNUC__"
- esac
- case "$mips_type" in
- '');;
-@@ -23010,7 +23010,7 @@ fi
- 
- : add -D_FORTIFY_SOURCE if feasible and not already there
- case "$gccversion" in
--[45].*)	case "$optimize$ccflags" in
-+[456789].*|[1-9][0-9]*)	case "$optimize$ccflags" in
- 	*-O*)	case "$ccflags$cppsymbols" in
- 		*_FORTIFY_SOURCE=*) # Don't add it again.
- 			echo "You seem to have -D_FORTIFY_SOURCE already, not adding it." >&4
-diff --git a/cpan/Time-Local/t/Local.t b/cpan/Time-Local/t/Local.t
-index 472e71a..0a852a0 100644
---- a/cpan/Time-Local/t/Local.t
-+++ b/cpan/Time-Local/t/Local.t
-@@ -91,7 +91,7 @@ for (@time, @neg_time) {
- 
-         # Test timelocal()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timelocal($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = localtime($time);
-@@ -107,7 +107,7 @@ for (@time, @neg_time) {
- 
-         # Test timegm()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timegm($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = gmtime($time);
-@@ -125,7 +125,6 @@ for (@time, @neg_time) {
- 
- for (@bad_time) {
-     my($year, $mon, $mday, $hour, $min, $sec) = @$_;
--    $year -= 1900;
-     $mon--;
- 
-     eval { timegm($sec,$min,$hour,$mday,$mon,$year) };
-@@ -134,14 +133,14 @@ for (@bad_time) {
- }
- 
- {
--    is(timelocal(0,0,1,1,0,90) - timelocal(0,0,0,1,0,90), 3600,
-+    is(timelocal(0,0,1,1,0,1990) - timelocal(0,0,0,1,0,1990), 3600,
-        'one hour difference between two calls to timelocal');
- 
--    is(timelocal(1,2,3,1,0,100) - timelocal(1,2,3,31,11,99), 24 * 3600,
-+    is(timelocal(1,2,3,1,0,2000) - timelocal(1,2,3,31,11,1999), 24 * 3600,
-        'one day difference between two calls to timelocal');
- 
-     # Diff beween Jan 1, 1980 and Mar 1, 1980 = (31 + 29 = 60 days)
--    is(timegm(0,0,0, 1, 2, 80) - timegm(0,0,0, 1, 0, 80), 60 * 24 * 3600,
-+    is(timegm(0,0,0, 1, 2, 1980) - timegm(0,0,0, 1, 0, 1980), 60 * 24 * 3600,
-        '60 day difference between two calls to timegm');
- }
- 
-diff --git a/hints/linux.sh b/hints/linux.sh
-index fb5a46e..c749f0f 100644
---- a/hints/linux.sh
-+++ b/hints/linux.sh
-@@ -85,7 +85,7 @@ uname_minus_m="${uname_minus_m:-"$targetarch"}"
- 
- # Check if we're about to use Intel's ICC compiler
- case "`${cc:-cc} -V 2>&1`" in
--*"Intel(R) C++ Compiler"*|*"Intel(R) C Compiler"*)
-+*"Intel(R) C"*" Compiler"*)
-     # record the version, formats:
-     # icc (ICC) 10.1 20080801
-     # icpc (ICC) 10.1 20080801
-@@ -165,6 +165,9 @@ esac
- # plibpth to bypass this check.
- if [ -x /usr/bin/gcc ] ; then
-     gcc=/usr/bin/gcc
-+# clang also provides -print-search-dirs
-+elif ${cc:-cc} --version 2>/dev/null | grep -q '^clang ' ; then
-+    gcc=${cc:-cc}
- else
-     gcc=gcc
- fi
-@@ -178,6 +181,16 @@ case "$plibpth" in
-     ;;
- esac
- 
-+# For the musl libc, perl should #define _GNU_SOURCE.  Otherwise, some
-+# available functions, like memem, won't be used.  See the discussion in
-+# [perl #133760].  musl doesn't offer an easy way to identify it, but,
-+# at least on alpine linux, the ldd --version output contains the
-+# string 'musl.'
-+case `ldd --version 2>&1` in
-+    musl*)  ccflags="$ccflags -D_GNU_SOURCE" ;;
-+        *) ;;
-+esac
-+
- # libquadmath is sometimes installed as gcc internal library,
- # so contrary to our usual policy of *not* looking at gcc internal
- # directories we now *do* look at them, in case they contain
-@@ -221,92 +234,6 @@ case "$libc" in
-     ;;
- esac
- 
--# Are we using ELF?  Thanks to Kenneth Albanowski <kjahds@kjahds.com>
--# for this test.
--cat >try.c <<'EOM'
--/* Test for whether ELF binaries are produced */
--#include <fcntl.h>
--#include <stdlib.h>
--#include <unistd.h>
--main() {
--	char buffer[4];
--	int i=open("a.out",O_RDONLY);
--	if(i==-1)
--		exit(1); /* fail */
--	if(read(i,&buffer[0],4)<4)
--		exit(1); /* fail */
--	if(buffer[0] != 127 || buffer[1] != 'E' ||
--           buffer[2] != 'L' || buffer[3] != 'F')
--		exit(1); /* fail */
--	exit(0); /* succeed (yes, it's ELF) */
--}
--EOM
--if ${cc:-gcc} $ccflags $ldflags try.c >/dev/null 2>&1 && $run ./a.out; then
--    cat <<'EOM' >&4
--
--You appear to have ELF support.  I'll try to use it for dynamic loading.
--If dynamic loading doesn't work, read hints/linux.sh for further information.
--EOM
--
--else
--    cat <<'EOM' >&4
--
--You don't have an ELF gcc.  I will use dld if possible.  If you are
--using a version of DLD earlier than 3.2.6, or don't have it at all, you
--should probably upgrade. If you are forced to use 3.2.4, you should
--uncomment a couple of lines in hints/linux.sh and restart Configure so
--that shared libraries will be disallowed.
--
--EOM
--    lddlflags="-r $lddlflags"
--    # These empty values are so that Configure doesn't put in the
--    # Linux ELF values.
--    ccdlflags=' '
--    cccdlflags=' '
--    ccflags="-DOVR_DBL_DIG=14 $ccflags"
--    so='sa'
--    dlext='o'
--    nm_so_opt=' '
--    ## If you are using DLD 3.2.4 which does not support shared libs,
--    ## uncomment the next two lines:
--    #ldflags="-static"
--    #so='none'
--
--	# In addition, on some systems there is a problem with perl and NDBM
--	# which causes AnyDBM and NDBM_File to lock up. This is evidenced
--	# in the tests as AnyDBM just freezing.  Apparently, this only
--	# happens on a.out systems, so we disable NDBM for all a.out linux
--	# systems.  If someone can suggest a more robust test
--	#  that would be appreciated.
--	#
--	# More info:
--	# Date: Wed, 7 Feb 1996 03:21:04 +0900
--	# From: Jeffrey Friedl <jfriedl@nff.ncl.omron.co.jp>
--	#
--	# I tried compiling with DBM support and sure enough things locked up
--	# just as advertised. Checking into it, I found that the lockup was
--	# during the call to dbm_open. Not *in* dbm_open -- but between the call
--	# to and the jump into.
--	#
--	# To make a long story short, making sure that the *.a and *.sa pairs of
--	#   /usr/lib/lib{m,db,gdbm}.{a,sa}
--	# were perfectly in sync took care of it.
--	#
--	# This will generate a harmless Whoa There! message
--	case "$d_dbm_open" in
--	'')	cat <<'EOM' >&4
--
--Disabling ndbm.  This will generate a Whoa There message in Configure.
--Read hints/linux.sh for further information.
--EOM
--		# You can override this with Configure -Dd_dbm_open
--		d_dbm_open=undef
--		;;
--	esac
--fi
--
--rm -f try.c a.out
--
- if ${sh:-/bin/sh} -c exit; then
-   echo ''
-   echo 'You appear to have a working bash.  Good.'
-diff --git a/pp.c b/pp.c
-index 3173c5a..f2a37bd 100644
---- a/pp.c
-+++ b/pp.c
-@@ -3624,8 +3624,12 @@ PP(pp_crypt)
- #if defined(__GLIBC__) || defined(__EMX__)
- 	if (PL_reentrant_buffer->_crypt_struct_buffer) {
- 	    PL_reentrant_buffer->_crypt_struct_buffer->initialized = 0;
--	    /* work around glibc-2.2.5 bug */
-+#if (defined(__GLIBC__) && __GLIBC__ == 2) && \
-+    (defined(__GLIBC_MINOR__) && __GLIBC_MINOR__ >= 2 && __GLIBC_MINOR__ < 4)
-+	    /* work around glibc-2.2.5 bug, has been fixed at some
-+	     * time in glibc-2.3.X */
- 	    PL_reentrant_buffer->_crypt_struct_buffer->current_saltbits = 0;
-+#endif
- 	}
- #endif
-     }

5.022.004-main,debugging,longdouble-buster/Dockerfile

@@ -1,59 +0,0 @@
-FROM debian:buster-backports
-LABEL maintainer="Ryan Voots <simcop@cpan.org>"
-
-COPY *.patch /usr/src/perl/
-WORKDIR /usr/src/perl
-
-ENV DEBIAN_FRONTEND=noninteractive
-
-RUN perl -i.bak -pE '$x=$_; $x=~s|^deb |deb-src |g;$_.=$x' /etc/apt/sources.list \
-    && apt update \
-    && apt -yq full-upgrade \
-    && apt -yq build-dep perl \
-    &&     apt-get install -y --no-install-recommends \
-       bzip2 \
-       ca-certificates \
-       # cpio \
-       curl \
-       dpkg-dev \
-       # file \
-       gcc \
-       # g++ \
-       libbz2-dev \
-       libdb-dev \
-       libc6-dev \
-       libgdbm-dev \
-       liblzma-dev \
-       make \
-       netbase \
-       patch \
-       procps \
-       zlib1g-dev \
-       xz-utils \
-    && curl -SL https://www.cpan.org/src/5.0/perl-5.22.4.tar.xz -o perl-5.22.4.tar.xz \
-    && echo '713243dce27d7aa0bdbf52b2070de5ce449f9ffbcc14a93efbc6f2beff0f5ce8 *perl-5.22.4.tar.xz' | sha256sum -c -
-RUN tar --strip-components=1 -xaf perl-5.22.4.tar.xz -C /usr/src/perl \
-    && rm perl-5.22.4.tar.xz \
-    && cat *.patch | patch -p1 \
-    && echo 'print "1..0 # Skipped: Tests are invalid"' > /usr/src/perl/ext/GDBM_File/t/fatal.t
-RUN gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)" \
-    && archBits="$(dpkg-architecture --query DEB_BUILD_ARCH_BITS)" \
-    && archFlag="$([ "$archBits" = '64' ] && echo '-Duse64bitall' || echo '-Duse64bitint')" \
-    && ./Configure -Darchname="$gnuArch" "$archFlag" -Accflags=-ggdb -DDEBUGGING -Duselongdouble -Duseshrplib -Dvendorprefix=/usr/local -Aldflags='-Wl,-z,now -Wl,-zrelro -Wl,-z,noexecstack' -Accflags='-fpie -fPIC -fstack-protector-all -pie -D_FORTIFY_SOURCE=2' -Duseshrplib  -des \
-    && make -j$(nproc) \
-    && TEST_JOBS=$(nproc) make test_harness
-RUN make install \
-    && cd /usr/src \
-    && curl -LO https://www.cpan.org/authors/id/M/MI/MIYAGAWA/App-cpanminus-1.7044.tar.gz \
-    && echo '9b60767fe40752ef7a9d3f13f19060a63389a5c23acc3e9827e19b75500f81f3 *App-cpanminus-1.7044.tar.gz' | sha256sum -c - \
-    && tar -xzf App-cpanminus-1.7044.tar.gz && cd App-cpanminus-1.7044 && perl bin/cpanm . && cd /root \
-    && savedPackages="make netbase" \
-    && apt-mark auto '.*' > /dev/null \
-    && apt-mark manual $savedPackages \
-    && apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false \
-    && rm -fr /var/cache/apt/* /var/lib/apt/lists/* \
-    && rm -fr ./cpanm /root/.cpanm /usr/src/perl /usr/src/App-cpanminus-1.7044* /tmp/*
-
-WORKDIR /
-
-CMD ["perl5.22.4","-de0"]

5.022.004-main,debugging,quadmath,threaded-bullseye/DevelPatchPerl.patch

@@ -1,264 +0,0 @@
-diff --git a/Configure b/Configure
-index 5f5f279..8ce5cbb 100755
---- a/Configure
-+++ b/Configure
-@@ -4658,7 +4658,7 @@ else
- fi
- $rm -f try try.*
- case "$gccversion" in
--1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-+1.*) cpp=`./loc gcc-cpp $cpp $pth` ;;
- esac
- case "$gccversion" in
- '') gccosandvers='' ;;
-@@ -4698,7 +4698,7 @@ esac
- # gcc 3.* complain about adding -Idirectories that they already know about,
- # so we will take those off from locincpth.
- case "$gccversion" in
--3*)
-+3.*)
-     echo "main(){}">try.c
-     for incdir in $locincpth; do
-        warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
-@@ -5410,13 +5410,13 @@ fi
- case "$hint" in
- default|recommended)
- 	case "$gccversion" in
--	1*) dflt="$dflt -fpcc-struct-return" ;;
-+	1.*) dflt="$dflt -fpcc-struct-return" ;;
- 	esac
- 	case "$optimize:$DEBUGGING" in
- 	*-g*:old) dflt="$dflt -DDEBUGGING";;
- 	esac
- 	case "$gccversion" in
--	2*) if $test -d /etc/conf/kconfig.d &&
-+	2.*) if $test -d /etc/conf/kconfig.d &&
- 			$contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- 		then
- 			# Interactive Systems (ISC) POSIX mode.
-@@ -5425,7 +5425,7 @@ default|recommended)
- 		;;
- 	esac
- 	case "$gccversion" in
--	1*) ;;
-+	1.*) ;;
- 	2.[0-8]*) ;;
- 	?*)	set strict-aliasing -fno-strict-aliasing
- 		eval $checkccflag
-@@ -5534,7 +5534,7 @@ case "$cppflags" in
- *)  cppflags="$cppflags $ccflags" ;;
- esac
- case "$gccversion" in
--1*) cppflags="$cppflags -D__GNUC__"
-+1.*) cppflags="$cppflags -D__GNUC__"
- esac
- case "$mips_type" in
- '');;
-@@ -23010,7 +23010,7 @@ fi
- 
- : add -D_FORTIFY_SOURCE if feasible and not already there
- case "$gccversion" in
--[45].*)	case "$optimize$ccflags" in
-+[456789].*|[1-9][0-9]*)	case "$optimize$ccflags" in
- 	*-O*)	case "$ccflags$cppsymbols" in
- 		*_FORTIFY_SOURCE=*) # Don't add it again.
- 			echo "You seem to have -D_FORTIFY_SOURCE already, not adding it." >&4
-diff --git a/cpan/Time-Local/t/Local.t b/cpan/Time-Local/t/Local.t
-index 472e71a..0a852a0 100644
---- a/cpan/Time-Local/t/Local.t
-+++ b/cpan/Time-Local/t/Local.t
-@@ -91,7 +91,7 @@ for (@time, @neg_time) {
- 
-         # Test timelocal()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timelocal($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = localtime($time);
-@@ -107,7 +107,7 @@ for (@time, @neg_time) {
- 
-         # Test timegm()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timegm($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = gmtime($time);
-@@ -125,7 +125,6 @@ for (@time, @neg_time) {
- 
- for (@bad_time) {
-     my($year, $mon, $mday, $hour, $min, $sec) = @$_;
--    $year -= 1900;
-     $mon--;
- 
-     eval { timegm($sec,$min,$hour,$mday,$mon,$year) };
-@@ -134,14 +133,14 @@ for (@bad_time) {
- }
- 
- {
--    is(timelocal(0,0,1,1,0,90) - timelocal(0,0,0,1,0,90), 3600,
-+    is(timelocal(0,0,1,1,0,1990) - timelocal(0,0,0,1,0,1990), 3600,
-        'one hour difference between two calls to timelocal');
- 
--    is(timelocal(1,2,3,1,0,100) - timelocal(1,2,3,31,11,99), 24 * 3600,
-+    is(timelocal(1,2,3,1,0,2000) - timelocal(1,2,3,31,11,1999), 24 * 3600,
-        'one day difference between two calls to timelocal');
- 
-     # Diff beween Jan 1, 1980 and Mar 1, 1980 = (31 + 29 = 60 days)
--    is(timegm(0,0,0, 1, 2, 80) - timegm(0,0,0, 1, 0, 80), 60 * 24 * 3600,
-+    is(timegm(0,0,0, 1, 2, 1980) - timegm(0,0,0, 1, 0, 1980), 60 * 24 * 3600,
-        '60 day difference between two calls to timegm');
- }
- 
-diff --git a/hints/linux.sh b/hints/linux.sh
-index fb5a46e..c749f0f 100644
---- a/hints/linux.sh
-+++ b/hints/linux.sh
-@@ -85,7 +85,7 @@ uname_minus_m="${uname_minus_m:-"$targetarch"}"
- 
- # Check if we're about to use Intel's ICC compiler
- case "`${cc:-cc} -V 2>&1`" in
--*"Intel(R) C++ Compiler"*|*"Intel(R) C Compiler"*)
-+*"Intel(R) C"*" Compiler"*)
-     # record the version, formats:
-     # icc (ICC) 10.1 20080801
-     # icpc (ICC) 10.1 20080801
-@@ -165,6 +165,9 @@ esac
- # plibpth to bypass this check.
- if [ -x /usr/bin/gcc ] ; then
-     gcc=/usr/bin/gcc
-+# clang also provides -print-search-dirs
-+elif ${cc:-cc} --version 2>/dev/null | grep -q '^clang ' ; then
-+    gcc=${cc:-cc}
- else
-     gcc=gcc
- fi
-@@ -178,6 +181,16 @@ case "$plibpth" in
-     ;;
- esac
- 
-+# For the musl libc, perl should #define _GNU_SOURCE.  Otherwise, some
-+# available functions, like memem, won't be used.  See the discussion in
-+# [perl #133760].  musl doesn't offer an easy way to identify it, but,
-+# at least on alpine linux, the ldd --version output contains the
-+# string 'musl.'
-+case `ldd --version 2>&1` in
-+    musl*)  ccflags="$ccflags -D_GNU_SOURCE" ;;
-+        *) ;;
-+esac
-+
- # libquadmath is sometimes installed as gcc internal library,
- # so contrary to our usual policy of *not* looking at gcc internal
- # directories we now *do* look at them, in case they contain
-@@ -221,92 +234,6 @@ case "$libc" in
-     ;;
- esac
- 
--# Are we using ELF?  Thanks to Kenneth Albanowski <kjahds@kjahds.com>
--# for this test.
--cat >try.c <<'EOM'
--/* Test for whether ELF binaries are produced */
--#include <fcntl.h>
--#include <stdlib.h>
--#include <unistd.h>
--main() {
--	char buffer[4];
--	int i=open("a.out",O_RDONLY);
--	if(i==-1)
--		exit(1); /* fail */
--	if(read(i,&buffer[0],4)<4)
--		exit(1); /* fail */
--	if(buffer[0] != 127 || buffer[1] != 'E' ||
--           buffer[2] != 'L' || buffer[3] != 'F')
--		exit(1); /* fail */
--	exit(0); /* succeed (yes, it's ELF) */
--}
--EOM
--if ${cc:-gcc} $ccflags $ldflags try.c >/dev/null 2>&1 && $run ./a.out; then
--    cat <<'EOM' >&4
--
--You appear to have ELF support.  I'll try to use it for dynamic loading.
--If dynamic loading doesn't work, read hints/linux.sh for further information.
--EOM
--
--else
--    cat <<'EOM' >&4
--
--You don't have an ELF gcc.  I will use dld if possible.  If you are
--using a version of DLD earlier than 3.2.6, or don't have it at all, you
--should probably upgrade. If you are forced to use 3.2.4, you should
--uncomment a couple of lines in hints/linux.sh and restart Configure so
--that shared libraries will be disallowed.
--
--EOM
--    lddlflags="-r $lddlflags"
--    # These empty values are so that Configure doesn't put in the
--    # Linux ELF values.
--    ccdlflags=' '
--    cccdlflags=' '
--    ccflags="-DOVR_DBL_DIG=14 $ccflags"
--    so='sa'
--    dlext='o'
--    nm_so_opt=' '
--    ## If you are using DLD 3.2.4 which does not support shared libs,
--    ## uncomment the next two lines:
--    #ldflags="-static"
--    #so='none'
--
--	# In addition, on some systems there is a problem with perl and NDBM
--	# which causes AnyDBM and NDBM_File to lock up. This is evidenced
--	# in the tests as AnyDBM just freezing.  Apparently, this only
--	# happens on a.out systems, so we disable NDBM for all a.out linux
--	# systems.  If someone can suggest a more robust test
--	#  that would be appreciated.
--	#
--	# More info:
--	# Date: Wed, 7 Feb 1996 03:21:04 +0900
--	# From: Jeffrey Friedl <jfriedl@nff.ncl.omron.co.jp>
--	#
--	# I tried compiling with DBM support and sure enough things locked up
--	# just as advertised. Checking into it, I found that the lockup was
--	# during the call to dbm_open. Not *in* dbm_open -- but between the call
--	# to and the jump into.
--	#
--	# To make a long story short, making sure that the *.a and *.sa pairs of
--	#   /usr/lib/lib{m,db,gdbm}.{a,sa}
--	# were perfectly in sync took care of it.
--	#
--	# This will generate a harmless Whoa There! message
--	case "$d_dbm_open" in
--	'')	cat <<'EOM' >&4
--
--Disabling ndbm.  This will generate a Whoa There message in Configure.
--Read hints/linux.sh for further information.
--EOM
--		# You can override this with Configure -Dd_dbm_open
--		d_dbm_open=undef
--		;;
--	esac
--fi
--
--rm -f try.c a.out
--
- if ${sh:-/bin/sh} -c exit; then
-   echo ''
-   echo 'You appear to have a working bash.  Good.'
-diff --git a/pp.c b/pp.c
-index 3173c5a..f2a37bd 100644
---- a/pp.c
-+++ b/pp.c
-@@ -3624,8 +3624,12 @@ PP(pp_crypt)
- #if defined(__GLIBC__) || defined(__EMX__)
- 	if (PL_reentrant_buffer->_crypt_struct_buffer) {
- 	    PL_reentrant_buffer->_crypt_struct_buffer->initialized = 0;
--	    /* work around glibc-2.2.5 bug */
-+#if (defined(__GLIBC__) && __GLIBC__ == 2) && \
-+    (defined(__GLIBC_MINOR__) && __GLIBC_MINOR__ >= 2 && __GLIBC_MINOR__ < 4)
-+	    /* work around glibc-2.2.5 bug, has been fixed at some
-+	     * time in glibc-2.3.X */
- 	    PL_reentrant_buffer->_crypt_struct_buffer->current_saltbits = 0;
-+#endif
- 	}
- #endif
-     }

5.022.004-main,debugging,quadmath,threaded-bullseye/Dockerfile

@@ -1,59 +0,0 @@
-FROM debian:bullseye-backports
-LABEL maintainer="Ryan Voots <simcop@cpan.org>"
-
-COPY *.patch /usr/src/perl/
-WORKDIR /usr/src/perl
-
-ENV DEBIAN_FRONTEND=noninteractive
-
-RUN perl -i.bak -pE '$x=$_; $x=~s|^deb |deb-src |g;$_.=$x' /etc/apt/sources.list \
-    && apt update \
-    && apt -yq full-upgrade \
-    && apt -yq build-dep perl \
-    &&     apt-get install -y --no-install-recommends \
-       bzip2 \
-       ca-certificates \
-       # cpio \
-       curl \
-       dpkg-dev \
-       # file \
-       gcc \
-       # g++ \
-       libbz2-dev \
-       libdb-dev \
-       libc6-dev \
-       libgdbm-dev \
-       liblzma-dev \
-       make \
-       netbase \
-       patch \
-       procps \
-       zlib1g-dev \
-       xz-utils \
-    && curl -SL https://www.cpan.org/src/5.0/perl-5.22.4.tar.xz -o perl-5.22.4.tar.xz \
-    && echo '713243dce27d7aa0bdbf52b2070de5ce449f9ffbcc14a93efbc6f2beff0f5ce8 *perl-5.22.4.tar.xz' | sha256sum -c -
-RUN tar --strip-components=1 -xaf perl-5.22.4.tar.xz -C /usr/src/perl \
-    && rm perl-5.22.4.tar.xz \
-    && cat *.patch | patch -p1 \
-    && echo 'print "1..0 # Skipped: Tests are invalid"' > /usr/src/perl/ext/GDBM_File/t/fatal.t
-RUN gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)" \
-    && archBits="$(dpkg-architecture --query DEB_BUILD_ARCH_BITS)" \
-    && archFlag="$([ "$archBits" = '64' ] && echo '-Duse64bitall' || echo '-Duse64bitint')" \
-    && ./Configure -Darchname="$gnuArch" "$archFlag" -Accflags=-ggdb -DDEBUGGING -Dusethreads -Dusequadmath -Duseshrplib -Dvendorprefix=/usr/local -Aldflags='-Wl,-z,now -Wl,-zrelro -Wl,-z,noexecstack' -Accflags='-fpie -fPIC -fstack-protector-all -pie -D_FORTIFY_SOURCE=2' -Duseshrplib  -des \
-    && make -j$(nproc) \
-    && TEST_JOBS=$(nproc) make test_harness
-RUN make install \
-    && cd /usr/src \
-    && curl -LO https://www.cpan.org/authors/id/M/MI/MIYAGAWA/App-cpanminus-1.7044.tar.gz \
-    && echo '9b60767fe40752ef7a9d3f13f19060a63389a5c23acc3e9827e19b75500f81f3 *App-cpanminus-1.7044.tar.gz' | sha256sum -c - \
-    && tar -xzf App-cpanminus-1.7044.tar.gz && cd App-cpanminus-1.7044 && perl bin/cpanm . && cd /root \
-    && savedPackages="make netbase" \
-    && apt-mark auto '.*' > /dev/null \
-    && apt-mark manual $savedPackages \
-    && apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false \
-    && rm -fr /var/cache/apt/* /var/lib/apt/lists/* \
-    && rm -fr ./cpanm /root/.cpanm /usr/src/perl /usr/src/App-cpanminus-1.7044* /tmp/*
-
-WORKDIR /
-
-CMD ["perl5.22.4","-de0"]

5.022.004-main,debugging,quadmath,threaded-buster/DevelPatchPerl.patch

@@ -1,264 +0,0 @@
-diff --git a/Configure b/Configure
-index 5f5f279..8ce5cbb 100755
---- a/Configure
-+++ b/Configure
-@@ -4658,7 +4658,7 @@ else
- fi
- $rm -f try try.*
- case "$gccversion" in
--1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-+1.*) cpp=`./loc gcc-cpp $cpp $pth` ;;
- esac
- case "$gccversion" in
- '') gccosandvers='' ;;
-@@ -4698,7 +4698,7 @@ esac
- # gcc 3.* complain about adding -Idirectories that they already know about,
- # so we will take those off from locincpth.
- case "$gccversion" in
--3*)
-+3.*)
-     echo "main(){}">try.c
-     for incdir in $locincpth; do
-        warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
-@@ -5410,13 +5410,13 @@ fi
- case "$hint" in
- default|recommended)
- 	case "$gccversion" in
--	1*) dflt="$dflt -fpcc-struct-return" ;;
-+	1.*) dflt="$dflt -fpcc-struct-return" ;;
- 	esac
- 	case "$optimize:$DEBUGGING" in
- 	*-g*:old) dflt="$dflt -DDEBUGGING";;
- 	esac
- 	case "$gccversion" in
--	2*) if $test -d /etc/conf/kconfig.d &&
-+	2.*) if $test -d /etc/conf/kconfig.d &&
- 			$contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- 		then
- 			# Interactive Systems (ISC) POSIX mode.
-@@ -5425,7 +5425,7 @@ default|recommended)
- 		;;
- 	esac
- 	case "$gccversion" in
--	1*) ;;
-+	1.*) ;;
- 	2.[0-8]*) ;;
- 	?*)	set strict-aliasing -fno-strict-aliasing
- 		eval $checkccflag
-@@ -5534,7 +5534,7 @@ case "$cppflags" in
- *)  cppflags="$cppflags $ccflags" ;;
- esac
- case "$gccversion" in
--1*) cppflags="$cppflags -D__GNUC__"
-+1.*) cppflags="$cppflags -D__GNUC__"
- esac
- case "$mips_type" in
- '');;
-@@ -23010,7 +23010,7 @@ fi
- 
- : add -D_FORTIFY_SOURCE if feasible and not already there
- case "$gccversion" in
--[45].*)	case "$optimize$ccflags" in
-+[456789].*|[1-9][0-9]*)	case "$optimize$ccflags" in
- 	*-O*)	case "$ccflags$cppsymbols" in
- 		*_FORTIFY_SOURCE=*) # Don't add it again.
- 			echo "You seem to have -D_FORTIFY_SOURCE already, not adding it." >&4
-diff --git a/cpan/Time-Local/t/Local.t b/cpan/Time-Local/t/Local.t
-index 472e71a..0a852a0 100644
---- a/cpan/Time-Local/t/Local.t
-+++ b/cpan/Time-Local/t/Local.t
-@@ -91,7 +91,7 @@ for (@time, @neg_time) {
- 
-         # Test timelocal()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timelocal($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = localtime($time);
-@@ -107,7 +107,7 @@ for (@time, @neg_time) {
- 
-         # Test timegm()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timegm($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = gmtime($time);
-@@ -125,7 +125,6 @@ for (@time, @neg_time) {
- 
- for (@bad_time) {
-     my($year, $mon, $mday, $hour, $min, $sec) = @$_;
--    $year -= 1900;
-     $mon--;
- 
-     eval { timegm($sec,$min,$hour,$mday,$mon,$year) };
-@@ -134,14 +133,14 @@ for (@bad_time) {
- }
- 
- {
--    is(timelocal(0,0,1,1,0,90) - timelocal(0,0,0,1,0,90), 3600,
-+    is(timelocal(0,0,1,1,0,1990) - timelocal(0,0,0,1,0,1990), 3600,
-        'one hour difference between two calls to timelocal');
- 
--    is(timelocal(1,2,3,1,0,100) - timelocal(1,2,3,31,11,99), 24 * 3600,
-+    is(timelocal(1,2,3,1,0,2000) - timelocal(1,2,3,31,11,1999), 24 * 3600,
-        'one day difference between two calls to timelocal');
- 
-     # Diff beween Jan 1, 1980 and Mar 1, 1980 = (31 + 29 = 60 days)
--    is(timegm(0,0,0, 1, 2, 80) - timegm(0,0,0, 1, 0, 80), 60 * 24 * 3600,
-+    is(timegm(0,0,0, 1, 2, 1980) - timegm(0,0,0, 1, 0, 1980), 60 * 24 * 3600,
-        '60 day difference between two calls to timegm');
- }
- 
-diff --git a/hints/linux.sh b/hints/linux.sh
-index fb5a46e..c749f0f 100644
---- a/hints/linux.sh
-+++ b/hints/linux.sh
-@@ -85,7 +85,7 @@ uname_minus_m="${uname_minus_m:-"$targetarch"}"
- 
- # Check if we're about to use Intel's ICC compiler
- case "`${cc:-cc} -V 2>&1`" in
--*"Intel(R) C++ Compiler"*|*"Intel(R) C Compiler"*)
-+*"Intel(R) C"*" Compiler"*)
-     # record the version, formats:
-     # icc (ICC) 10.1 20080801
-     # icpc (ICC) 10.1 20080801
-@@ -165,6 +165,9 @@ esac
- # plibpth to bypass this check.
- if [ -x /usr/bin/gcc ] ; then
-     gcc=/usr/bin/gcc
-+# clang also provides -print-search-dirs
-+elif ${cc:-cc} --version 2>/dev/null | grep -q '^clang ' ; then
-+    gcc=${cc:-cc}
- else
-     gcc=gcc
- fi
-@@ -178,6 +181,16 @@ case "$plibpth" in
-     ;;
- esac
- 
-+# For the musl libc, perl should #define _GNU_SOURCE.  Otherwise, some
-+# available functions, like memem, won't be used.  See the discussion in
-+# [perl #133760].  musl doesn't offer an easy way to identify it, but,
-+# at least on alpine linux, the ldd --version output contains the
-+# string 'musl.'
-+case `ldd --version 2>&1` in
-+    musl*)  ccflags="$ccflags -D_GNU_SOURCE" ;;
-+        *) ;;
-+esac
-+
- # libquadmath is sometimes installed as gcc internal library,
- # so contrary to our usual policy of *not* looking at gcc internal
- # directories we now *do* look at them, in case they contain
-@@ -221,92 +234,6 @@ case "$libc" in
-     ;;
- esac
- 
--# Are we using ELF?  Thanks to Kenneth Albanowski <kjahds@kjahds.com>
--# for this test.
--cat >try.c <<'EOM'
--/* Test for whether ELF binaries are produced */
--#include <fcntl.h>
--#include <stdlib.h>
--#include <unistd.h>
--main() {
--	char buffer[4];
--	int i=open("a.out",O_RDONLY);
--	if(i==-1)
--		exit(1); /* fail */
--	if(read(i,&buffer[0],4)<4)
--		exit(1); /* fail */
--	if(buffer[0] != 127 || buffer[1] != 'E' ||
--           buffer[2] != 'L' || buffer[3] != 'F')
--		exit(1); /* fail */
--	exit(0); /* succeed (yes, it's ELF) */
--}
--EOM
--if ${cc:-gcc} $ccflags $ldflags try.c >/dev/null 2>&1 && $run ./a.out; then
--    cat <<'EOM' >&4
--
--You appear to have ELF support.  I'll try to use it for dynamic loading.
--If dynamic loading doesn't work, read hints/linux.sh for further information.
--EOM
--
--else
--    cat <<'EOM' >&4
--
--You don't have an ELF gcc.  I will use dld if possible.  If you are
--using a version of DLD earlier than 3.2.6, or don't have it at all, you
--should probably upgrade. If you are forced to use 3.2.4, you should
--uncomment a couple of lines in hints/linux.sh and restart Configure so
--that shared libraries will be disallowed.
--
--EOM
--    lddlflags="-r $lddlflags"
--    # These empty values are so that Configure doesn't put in the
--    # Linux ELF values.
--    ccdlflags=' '
--    cccdlflags=' '
--    ccflags="-DOVR_DBL_DIG=14 $ccflags"
--    so='sa'
--    dlext='o'
--    nm_so_opt=' '
--    ## If you are using DLD 3.2.4 which does not support shared libs,
--    ## uncomment the next two lines:
--    #ldflags="-static"
--    #so='none'
--
--	# In addition, on some systems there is a problem with perl and NDBM
--	# which causes AnyDBM and NDBM_File to lock up. This is evidenced
--	# in the tests as AnyDBM just freezing.  Apparently, this only
--	# happens on a.out systems, so we disable NDBM for all a.out linux
--	# systems.  If someone can suggest a more robust test
--	#  that would be appreciated.
--	#
--	# More info:
--	# Date: Wed, 7 Feb 1996 03:21:04 +0900
--	# From: Jeffrey Friedl <jfriedl@nff.ncl.omron.co.jp>
--	#
--	# I tried compiling with DBM support and sure enough things locked up
--	# just as advertised. Checking into it, I found that the lockup was
--	# during the call to dbm_open. Not *in* dbm_open -- but between the call
--	# to and the jump into.
--	#
--	# To make a long story short, making sure that the *.a and *.sa pairs of
--	#   /usr/lib/lib{m,db,gdbm}.{a,sa}
--	# were perfectly in sync took care of it.
--	#
--	# This will generate a harmless Whoa There! message
--	case "$d_dbm_open" in
--	'')	cat <<'EOM' >&4
--
--Disabling ndbm.  This will generate a Whoa There message in Configure.
--Read hints/linux.sh for further information.
--EOM
--		# You can override this with Configure -Dd_dbm_open
--		d_dbm_open=undef
--		;;
--	esac
--fi
--
--rm -f try.c a.out
--
- if ${sh:-/bin/sh} -c exit; then
-   echo ''
-   echo 'You appear to have a working bash.  Good.'
-diff --git a/pp.c b/pp.c
-index 3173c5a..f2a37bd 100644
---- a/pp.c
-+++ b/pp.c
-@@ -3624,8 +3624,12 @@ PP(pp_crypt)
- #if defined(__GLIBC__) || defined(__EMX__)
- 	if (PL_reentrant_buffer->_crypt_struct_buffer) {
- 	    PL_reentrant_buffer->_crypt_struct_buffer->initialized = 0;
--	    /* work around glibc-2.2.5 bug */
-+#if (defined(__GLIBC__) && __GLIBC__ == 2) && \
-+    (defined(__GLIBC_MINOR__) && __GLIBC_MINOR__ >= 2 && __GLIBC_MINOR__ < 4)
-+	    /* work around glibc-2.2.5 bug, has been fixed at some
-+	     * time in glibc-2.3.X */
- 	    PL_reentrant_buffer->_crypt_struct_buffer->current_saltbits = 0;
-+#endif
- 	}
- #endif
-     }

5.022.004-main,debugging,quadmath,threaded-buster/Dockerfile

@@ -1,59 +0,0 @@
-FROM debian:buster-backports
-LABEL maintainer="Ryan Voots <simcop@cpan.org>"
-
-COPY *.patch /usr/src/perl/
-WORKDIR /usr/src/perl
-
-ENV DEBIAN_FRONTEND=noninteractive
-
-RUN perl -i.bak -pE '$x=$_; $x=~s|^deb |deb-src |g;$_.=$x' /etc/apt/sources.list \
-    && apt update \
-    && apt -yq full-upgrade \
-    && apt -yq build-dep perl \
-    &&     apt-get install -y --no-install-recommends \
-       bzip2 \
-       ca-certificates \
-       # cpio \
-       curl \
-       dpkg-dev \
-       # file \
-       gcc \
-       # g++ \
-       libbz2-dev \
-       libdb-dev \
-       libc6-dev \
-       libgdbm-dev \
-       liblzma-dev \
-       make \
-       netbase \
-       patch \
-       procps \
-       zlib1g-dev \
-       xz-utils \
-    && curl -SL https://www.cpan.org/src/5.0/perl-5.22.4.tar.xz -o perl-5.22.4.tar.xz \
-    && echo '713243dce27d7aa0bdbf52b2070de5ce449f9ffbcc14a93efbc6f2beff0f5ce8 *perl-5.22.4.tar.xz' | sha256sum -c -
-RUN tar --strip-components=1 -xaf perl-5.22.4.tar.xz -C /usr/src/perl \
-    && rm perl-5.22.4.tar.xz \
-    && cat *.patch | patch -p1 \
-    && echo 'print "1..0 # Skipped: Tests are invalid"' > /usr/src/perl/ext/GDBM_File/t/fatal.t
-RUN gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)" \
-    && archBits="$(dpkg-architecture --query DEB_BUILD_ARCH_BITS)" \
-    && archFlag="$([ "$archBits" = '64' ] && echo '-Duse64bitall' || echo '-Duse64bitint')" \
-    && ./Configure -Darchname="$gnuArch" "$archFlag" -Accflags=-ggdb -DDEBUGGING -Dusethreads -Dusequadmath -Duseshrplib -Dvendorprefix=/usr/local -Aldflags='-Wl,-z,now -Wl,-zrelro -Wl,-z,noexecstack' -Accflags='-fpie -fPIC -fstack-protector-all -pie -D_FORTIFY_SOURCE=2' -Duseshrplib  -des \
-    && make -j$(nproc) \
-    && TEST_JOBS=$(nproc) make test_harness
-RUN make install \
-    && cd /usr/src \
-    && curl -LO https://www.cpan.org/authors/id/M/MI/MIYAGAWA/App-cpanminus-1.7044.tar.gz \
-    && echo '9b60767fe40752ef7a9d3f13f19060a63389a5c23acc3e9827e19b75500f81f3 *App-cpanminus-1.7044.tar.gz' | sha256sum -c - \
-    && tar -xzf App-cpanminus-1.7044.tar.gz && cd App-cpanminus-1.7044 && perl bin/cpanm . && cd /root \
-    && savedPackages="make netbase" \
-    && apt-mark auto '.*' > /dev/null \
-    && apt-mark manual $savedPackages \
-    && apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false \
-    && rm -fr /var/cache/apt/* /var/lib/apt/lists/* \
-    && rm -fr ./cpanm /root/.cpanm /usr/src/perl /usr/src/App-cpanminus-1.7044* /tmp/*
-
-WORKDIR /
-
-CMD ["perl5.22.4","-de0"]

5.022.004-main,debugging,quadmath-bullseye/DevelPatchPerl.patch

@@ -1,264 +0,0 @@
-diff --git a/Configure b/Configure
-index 5f5f279..8ce5cbb 100755
---- a/Configure
-+++ b/Configure
-@@ -4658,7 +4658,7 @@ else
- fi
- $rm -f try try.*
- case "$gccversion" in
--1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-+1.*) cpp=`./loc gcc-cpp $cpp $pth` ;;
- esac
- case "$gccversion" in
- '') gccosandvers='' ;;
-@@ -4698,7 +4698,7 @@ esac
- # gcc 3.* complain about adding -Idirectories that they already know about,
- # so we will take those off from locincpth.
- case "$gccversion" in
--3*)
-+3.*)
-     echo "main(){}">try.c
-     for incdir in $locincpth; do
-        warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
-@@ -5410,13 +5410,13 @@ fi
- case "$hint" in
- default|recommended)
- 	case "$gccversion" in
--	1*) dflt="$dflt -fpcc-struct-return" ;;
-+	1.*) dflt="$dflt -fpcc-struct-return" ;;
- 	esac
- 	case "$optimize:$DEBUGGING" in
- 	*-g*:old) dflt="$dflt -DDEBUGGING";;
- 	esac
- 	case "$gccversion" in
--	2*) if $test -d /etc/conf/kconfig.d &&
-+	2.*) if $test -d /etc/conf/kconfig.d &&
- 			$contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- 		then
- 			# Interactive Systems (ISC) POSIX mode.
-@@ -5425,7 +5425,7 @@ default|recommended)
- 		;;
- 	esac
- 	case "$gccversion" in
--	1*) ;;
-+	1.*) ;;
- 	2.[0-8]*) ;;
- 	?*)	set strict-aliasing -fno-strict-aliasing
- 		eval $checkccflag
-@@ -5534,7 +5534,7 @@ case "$cppflags" in
- *)  cppflags="$cppflags $ccflags" ;;
- esac
- case "$gccversion" in
--1*) cppflags="$cppflags -D__GNUC__"
-+1.*) cppflags="$cppflags -D__GNUC__"
- esac
- case "$mips_type" in
- '');;
-@@ -23010,7 +23010,7 @@ fi
- 
- : add -D_FORTIFY_SOURCE if feasible and not already there
- case "$gccversion" in
--[45].*)	case "$optimize$ccflags" in
-+[456789].*|[1-9][0-9]*)	case "$optimize$ccflags" in
- 	*-O*)	case "$ccflags$cppsymbols" in
- 		*_FORTIFY_SOURCE=*) # Don't add it again.
- 			echo "You seem to have -D_FORTIFY_SOURCE already, not adding it." >&4
-diff --git a/cpan/Time-Local/t/Local.t b/cpan/Time-Local/t/Local.t
-index 472e71a..0a852a0 100644
---- a/cpan/Time-Local/t/Local.t
-+++ b/cpan/Time-Local/t/Local.t
-@@ -91,7 +91,7 @@ for (@time, @neg_time) {
- 
-         # Test timelocal()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timelocal($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = localtime($time);
-@@ -107,7 +107,7 @@ for (@time, @neg_time) {
- 
-         # Test timegm()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timegm($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = gmtime($time);
-@@ -125,7 +125,6 @@ for (@time, @neg_time) {
- 
- for (@bad_time) {
-     my($year, $mon, $mday, $hour, $min, $sec) = @$_;
--    $year -= 1900;
-     $mon--;
- 
-     eval { timegm($sec,$min,$hour,$mday,$mon,$year) };
-@@ -134,14 +133,14 @@ for (@bad_time) {
- }
- 
- {
--    is(timelocal(0,0,1,1,0,90) - timelocal(0,0,0,1,0,90), 3600,
-+    is(timelocal(0,0,1,1,0,1990) - timelocal(0,0,0,1,0,1990), 3600,
-        'one hour difference between two calls to timelocal');
- 
--    is(timelocal(1,2,3,1,0,100) - timelocal(1,2,3,31,11,99), 24 * 3600,
-+    is(timelocal(1,2,3,1,0,2000) - timelocal(1,2,3,31,11,1999), 24 * 3600,
-        'one day difference between two calls to timelocal');
- 
-     # Diff beween Jan 1, 1980 and Mar 1, 1980 = (31 + 29 = 60 days)
--    is(timegm(0,0,0, 1, 2, 80) - timegm(0,0,0, 1, 0, 80), 60 * 24 * 3600,
-+    is(timegm(0,0,0, 1, 2, 1980) - timegm(0,0,0, 1, 0, 1980), 60 * 24 * 3600,
-        '60 day difference between two calls to timegm');
- }
- 
-diff --git a/hints/linux.sh b/hints/linux.sh
-index fb5a46e..c749f0f 100644
---- a/hints/linux.sh
-+++ b/hints/linux.sh
-@@ -85,7 +85,7 @@ uname_minus_m="${uname_minus_m:-"$targetarch"}"
- 
- # Check if we're about to use Intel's ICC compiler
- case "`${cc:-cc} -V 2>&1`" in
--*"Intel(R) C++ Compiler"*|*"Intel(R) C Compiler"*)
-+*"Intel(R) C"*" Compiler"*)
-     # record the version, formats:
-     # icc (ICC) 10.1 20080801
-     # icpc (ICC) 10.1 20080801
-@@ -165,6 +165,9 @@ esac
- # plibpth to bypass this check.
- if [ -x /usr/bin/gcc ] ; then
-     gcc=/usr/bin/gcc
-+# clang also provides -print-search-dirs
-+elif ${cc:-cc} --version 2>/dev/null | grep -q '^clang ' ; then
-+    gcc=${cc:-cc}
- else
-     gcc=gcc
- fi
-@@ -178,6 +181,16 @@ case "$plibpth" in
-     ;;
- esac
- 
-+# For the musl libc, perl should #define _GNU_SOURCE.  Otherwise, some
-+# available functions, like memem, won't be used.  See the discussion in
-+# [perl #133760].  musl doesn't offer an easy way to identify it, but,
-+# at least on alpine linux, the ldd --version output contains the
-+# string 'musl.'
-+case `ldd --version 2>&1` in
-+    musl*)  ccflags="$ccflags -D_GNU_SOURCE" ;;
-+        *) ;;
-+esac
-+
- # libquadmath is sometimes installed as gcc internal library,
- # so contrary to our usual policy of *not* looking at gcc internal
- # directories we now *do* look at them, in case they contain
-@@ -221,92 +234,6 @@ case "$libc" in
-     ;;
- esac
- 
--# Are we using ELF?  Thanks to Kenneth Albanowski <kjahds@kjahds.com>
--# for this test.
--cat >try.c <<'EOM'
--/* Test for whether ELF binaries are produced */
--#include <fcntl.h>
--#include <stdlib.h>
--#include <unistd.h>
--main() {
--	char buffer[4];
--	int i=open("a.out",O_RDONLY);
--	if(i==-1)
--		exit(1); /* fail */
--	if(read(i,&buffer[0],4)<4)
--		exit(1); /* fail */
--	if(buffer[0] != 127 || buffer[1] != 'E' ||
--           buffer[2] != 'L' || buffer[3] != 'F')
--		exit(1); /* fail */
--	exit(0); /* succeed (yes, it's ELF) */
--}
--EOM
--if ${cc:-gcc} $ccflags $ldflags try.c >/dev/null 2>&1 && $run ./a.out; then
--    cat <<'EOM' >&4
--
--You appear to have ELF support.  I'll try to use it for dynamic loading.
--If dynamic loading doesn't work, read hints/linux.sh for further information.
--EOM
--
--else
--    cat <<'EOM' >&4
--
--You don't have an ELF gcc.  I will use dld if possible.  If you are
--using a version of DLD earlier than 3.2.6, or don't have it at all, you
--should probably upgrade. If you are forced to use 3.2.4, you should
--uncomment a couple of lines in hints/linux.sh and restart Configure so
--that shared libraries will be disallowed.
--
--EOM
--    lddlflags="-r $lddlflags"
--    # These empty values are so that Configure doesn't put in the
--    # Linux ELF values.
--    ccdlflags=' '
--    cccdlflags=' '
--    ccflags="-DOVR_DBL_DIG=14 $ccflags"
--    so='sa'
--    dlext='o'
--    nm_so_opt=' '
--    ## If you are using DLD 3.2.4 which does not support shared libs,
--    ## uncomment the next two lines:
--    #ldflags="-static"
--    #so='none'
--
--	# In addition, on some systems there is a problem with perl and NDBM
--	# which causes AnyDBM and NDBM_File to lock up. This is evidenced
--	# in the tests as AnyDBM just freezing.  Apparently, this only
--	# happens on a.out systems, so we disable NDBM for all a.out linux
--	# systems.  If someone can suggest a more robust test
--	#  that would be appreciated.
--	#
--	# More info:
--	# Date: Wed, 7 Feb 1996 03:21:04 +0900
--	# From: Jeffrey Friedl <jfriedl@nff.ncl.omron.co.jp>
--	#
--	# I tried compiling with DBM support and sure enough things locked up
--	# just as advertised. Checking into it, I found that the lockup was
--	# during the call to dbm_open. Not *in* dbm_open -- but between the call
--	# to and the jump into.
--	#
--	# To make a long story short, making sure that the *.a and *.sa pairs of
--	#   /usr/lib/lib{m,db,gdbm}.{a,sa}
--	# were perfectly in sync took care of it.
--	#
--	# This will generate a harmless Whoa There! message
--	case "$d_dbm_open" in
--	'')	cat <<'EOM' >&4
--
--Disabling ndbm.  This will generate a Whoa There message in Configure.
--Read hints/linux.sh for further information.
--EOM
--		# You can override this with Configure -Dd_dbm_open
--		d_dbm_open=undef
--		;;
--	esac
--fi
--
--rm -f try.c a.out
--
- if ${sh:-/bin/sh} -c exit; then
-   echo ''
-   echo 'You appear to have a working bash.  Good.'
-diff --git a/pp.c b/pp.c
-index 3173c5a..f2a37bd 100644
---- a/pp.c
-+++ b/pp.c
-@@ -3624,8 +3624,12 @@ PP(pp_crypt)
- #if defined(__GLIBC__) || defined(__EMX__)
- 	if (PL_reentrant_buffer->_crypt_struct_buffer) {
- 	    PL_reentrant_buffer->_crypt_struct_buffer->initialized = 0;
--	    /* work around glibc-2.2.5 bug */
-+#if (defined(__GLIBC__) && __GLIBC__ == 2) && \
-+    (defined(__GLIBC_MINOR__) && __GLIBC_MINOR__ >= 2 && __GLIBC_MINOR__ < 4)
-+	    /* work around glibc-2.2.5 bug, has been fixed at some
-+	     * time in glibc-2.3.X */
- 	    PL_reentrant_buffer->_crypt_struct_buffer->current_saltbits = 0;
-+#endif
- 	}
- #endif
-     }

5.022.004-main,debugging,quadmath-bullseye/Dockerfile

@@ -1,59 +0,0 @@
-FROM debian:bullseye-backports
-LABEL maintainer="Ryan Voots <simcop@cpan.org>"
-
-COPY *.patch /usr/src/perl/
-WORKDIR /usr/src/perl
-
-ENV DEBIAN_FRONTEND=noninteractive
-
-RUN perl -i.bak -pE '$x=$_; $x=~s|^deb |deb-src |g;$_.=$x' /etc/apt/sources.list \
-    && apt update \
-    && apt -yq full-upgrade \
-    && apt -yq build-dep perl \
-    &&     apt-get install -y --no-install-recommends \
-       bzip2 \
-       ca-certificates \
-       # cpio \
-       curl \
-       dpkg-dev \
-       # file \
-       gcc \
-       # g++ \
-       libbz2-dev \
-       libdb-dev \
-       libc6-dev \
-       libgdbm-dev \
-       liblzma-dev \
-       make \
-       netbase \
-       patch \
-       procps \
-       zlib1g-dev \
-       xz-utils \
-    && curl -SL https://www.cpan.org/src/5.0/perl-5.22.4.tar.xz -o perl-5.22.4.tar.xz \
-    && echo '713243dce27d7aa0bdbf52b2070de5ce449f9ffbcc14a93efbc6f2beff0f5ce8 *perl-5.22.4.tar.xz' | sha256sum -c -
-RUN tar --strip-components=1 -xaf perl-5.22.4.tar.xz -C /usr/src/perl \
-    && rm perl-5.22.4.tar.xz \
-    && cat *.patch | patch -p1 \
-    && echo 'print "1..0 # Skipped: Tests are invalid"' > /usr/src/perl/ext/GDBM_File/t/fatal.t
-RUN gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)" \
-    && archBits="$(dpkg-architecture --query DEB_BUILD_ARCH_BITS)" \
-    && archFlag="$([ "$archBits" = '64' ] && echo '-Duse64bitall' || echo '-Duse64bitint')" \
-    && ./Configure -Darchname="$gnuArch" "$archFlag" -Accflags=-ggdb -DDEBUGGING -Dusequadmath -Duseshrplib -Dvendorprefix=/usr/local -Aldflags='-Wl,-z,now -Wl,-zrelro -Wl,-z,noexecstack' -Accflags='-fpie -fPIC -fstack-protector-all -pie -D_FORTIFY_SOURCE=2' -Duseshrplib  -des \
-    && make -j$(nproc) \
-    && TEST_JOBS=$(nproc) make test_harness
-RUN make install \
-    && cd /usr/src \
-    && curl -LO https://www.cpan.org/authors/id/M/MI/MIYAGAWA/App-cpanminus-1.7044.tar.gz \
-    && echo '9b60767fe40752ef7a9d3f13f19060a63389a5c23acc3e9827e19b75500f81f3 *App-cpanminus-1.7044.tar.gz' | sha256sum -c - \
-    && tar -xzf App-cpanminus-1.7044.tar.gz && cd App-cpanminus-1.7044 && perl bin/cpanm . && cd /root \
-    && savedPackages="make netbase" \
-    && apt-mark auto '.*' > /dev/null \
-    && apt-mark manual $savedPackages \
-    && apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false \
-    && rm -fr /var/cache/apt/* /var/lib/apt/lists/* \
-    && rm -fr ./cpanm /root/.cpanm /usr/src/perl /usr/src/App-cpanminus-1.7044* /tmp/*
-
-WORKDIR /
-
-CMD ["perl5.22.4","-de0"]

5.022.004-main,debugging,quadmath-buster/DevelPatchPerl.patch

@@ -1,264 +0,0 @@
-diff --git a/Configure b/Configure
-index 5f5f279..8ce5cbb 100755
---- a/Configure
-+++ b/Configure
-@@ -4658,7 +4658,7 @@ else
- fi
- $rm -f try try.*
- case "$gccversion" in
--1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-+1.*) cpp=`./loc gcc-cpp $cpp $pth` ;;
- esac
- case "$gccversion" in
- '') gccosandvers='' ;;
-@@ -4698,7 +4698,7 @@ esac
- # gcc 3.* complain about adding -Idirectories that they already know about,
- # so we will take those off from locincpth.
- case "$gccversion" in
--3*)
-+3.*)
-     echo "main(){}">try.c
-     for incdir in $locincpth; do
-        warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
-@@ -5410,13 +5410,13 @@ fi
- case "$hint" in
- default|recommended)
- 	case "$gccversion" in
--	1*) dflt="$dflt -fpcc-struct-return" ;;
-+	1.*) dflt="$dflt -fpcc-struct-return" ;;
- 	esac
- 	case "$optimize:$DEBUGGING" in
- 	*-g*:old) dflt="$dflt -DDEBUGGING";;
- 	esac
- 	case "$gccversion" in
--	2*) if $test -d /etc/conf/kconfig.d &&
-+	2.*) if $test -d /etc/conf/kconfig.d &&
- 			$contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- 		then
- 			# Interactive Systems (ISC) POSIX mode.
-@@ -5425,7 +5425,7 @@ default|recommended)
- 		;;
- 	esac
- 	case "$gccversion" in
--	1*) ;;
-+	1.*) ;;
- 	2.[0-8]*) ;;
- 	?*)	set strict-aliasing -fno-strict-aliasing
- 		eval $checkccflag
-@@ -5534,7 +5534,7 @@ case "$cppflags" in
- *)  cppflags="$cppflags $ccflags" ;;
- esac
- case "$gccversion" in
--1*) cppflags="$cppflags -D__GNUC__"
-+1.*) cppflags="$cppflags -D__GNUC__"
- esac
- case "$mips_type" in
- '');;
-@@ -23010,7 +23010,7 @@ fi
- 
- : add -D_FORTIFY_SOURCE if feasible and not already there
- case "$gccversion" in
--[45].*)	case "$optimize$ccflags" in
-+[456789].*|[1-9][0-9]*)	case "$optimize$ccflags" in
- 	*-O*)	case "$ccflags$cppsymbols" in
- 		*_FORTIFY_SOURCE=*) # Don't add it again.
- 			echo "You seem to have -D_FORTIFY_SOURCE already, not adding it." >&4
-diff --git a/cpan/Time-Local/t/Local.t b/cpan/Time-Local/t/Local.t
-index 472e71a..0a852a0 100644
---- a/cpan/Time-Local/t/Local.t
-+++ b/cpan/Time-Local/t/Local.t
-@@ -91,7 +91,7 @@ for (@time, @neg_time) {
- 
-         # Test timelocal()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timelocal($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = localtime($time);
-@@ -107,7 +107,7 @@ for (@time, @neg_time) {
- 
-         # Test timegm()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timegm($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = gmtime($time);
-@@ -125,7 +125,6 @@ for (@time, @neg_time) {
- 
- for (@bad_time) {
-     my($year, $mon, $mday, $hour, $min, $sec) = @$_;
--    $year -= 1900;
-     $mon--;
- 
-     eval { timegm($sec,$min,$hour,$mday,$mon,$year) };
-@@ -134,14 +133,14 @@ for (@bad_time) {
- }
- 
- {
--    is(timelocal(0,0,1,1,0,90) - timelocal(0,0,0,1,0,90), 3600,
-+    is(timelocal(0,0,1,1,0,1990) - timelocal(0,0,0,1,0,1990), 3600,
-        'one hour difference between two calls to timelocal');
- 
--    is(timelocal(1,2,3,1,0,100) - timelocal(1,2,3,31,11,99), 24 * 3600,
-+    is(timelocal(1,2,3,1,0,2000) - timelocal(1,2,3,31,11,1999), 24 * 3600,
-        'one day difference between two calls to timelocal');
- 
-     # Diff beween Jan 1, 1980 and Mar 1, 1980 = (31 + 29 = 60 days)
--    is(timegm(0,0,0, 1, 2, 80) - timegm(0,0,0, 1, 0, 80), 60 * 24 * 3600,
-+    is(timegm(0,0,0, 1, 2, 1980) - timegm(0,0,0, 1, 0, 1980), 60 * 24 * 3600,
-        '60 day difference between two calls to timegm');
- }
- 
-diff --git a/hints/linux.sh b/hints/linux.sh
-index fb5a46e..c749f0f 100644
---- a/hints/linux.sh
-+++ b/hints/linux.sh
-@@ -85,7 +85,7 @@ uname_minus_m="${uname_minus_m:-"$targetarch"}"
- 
- # Check if we're about to use Intel's ICC compiler
- case "`${cc:-cc} -V 2>&1`" in
--*"Intel(R) C++ Compiler"*|*"Intel(R) C Compiler"*)
-+*"Intel(R) C"*" Compiler"*)
-     # record the version, formats:
-     # icc (ICC) 10.1 20080801
-     # icpc (ICC) 10.1 20080801
-@@ -165,6 +165,9 @@ esac
- # plibpth to bypass this check.
- if [ -x /usr/bin/gcc ] ; then
-     gcc=/usr/bin/gcc
-+# clang also provides -print-search-dirs
-+elif ${cc:-cc} --version 2>/dev/null | grep -q '^clang ' ; then
-+    gcc=${cc:-cc}
- else
-     gcc=gcc
- fi
-@@ -178,6 +181,16 @@ case "$plibpth" in
-     ;;
- esac
- 
-+# For the musl libc, perl should #define _GNU_SOURCE.  Otherwise, some
-+# available functions, like memem, won't be used.  See the discussion in
-+# [perl #133760].  musl doesn't offer an easy way to identify it, but,
-+# at least on alpine linux, the ldd --version output contains the
-+# string 'musl.'
-+case `ldd --version 2>&1` in
-+    musl*)  ccflags="$ccflags -D_GNU_SOURCE" ;;
-+        *) ;;
-+esac
-+
- # libquadmath is sometimes installed as gcc internal library,
- # so contrary to our usual policy of *not* looking at gcc internal
- # directories we now *do* look at them, in case they contain
-@@ -221,92 +234,6 @@ case "$libc" in
-     ;;
- esac
- 
--# Are we using ELF?  Thanks to Kenneth Albanowski <kjahds@kjahds.com>
--# for this test.
--cat >try.c <<'EOM'
--/* Test for whether ELF binaries are produced */
--#include <fcntl.h>
--#include <stdlib.h>
--#include <unistd.h>
--main() {
--	char buffer[4];
--	int i=open("a.out",O_RDONLY);
--	if(i==-1)
--		exit(1); /* fail */
--	if(read(i,&buffer[0],4)<4)
--		exit(1); /* fail */
--	if(buffer[0] != 127 || buffer[1] != 'E' ||
--           buffer[2] != 'L' || buffer[3] != 'F')
--		exit(1); /* fail */
--	exit(0); /* succeed (yes, it's ELF) */
--}
--EOM
--if ${cc:-gcc} $ccflags $ldflags try.c >/dev/null 2>&1 && $run ./a.out; then
--    cat <<'EOM' >&4
--
--You appear to have ELF support.  I'll try to use it for dynamic loading.
--If dynamic loading doesn't work, read hints/linux.sh for further information.
--EOM
--
--else
--    cat <<'EOM' >&4
--
--You don't have an ELF gcc.  I will use dld if possible.  If you are
--using a version of DLD earlier than 3.2.6, or don't have it at all, you
--should probably upgrade. If you are forced to use 3.2.4, you should
--uncomment a couple of lines in hints/linux.sh and restart Configure so
--that shared libraries will be disallowed.
--
--EOM
--    lddlflags="-r $lddlflags"
--    # These empty values are so that Configure doesn't put in the
--    # Linux ELF values.
--    ccdlflags=' '
--    cccdlflags=' '
--    ccflags="-DOVR_DBL_DIG=14 $ccflags"
--    so='sa'
--    dlext='o'
--    nm_so_opt=' '
--    ## If you are using DLD 3.2.4 which does not support shared libs,
--    ## uncomment the next two lines:
--    #ldflags="-static"
--    #so='none'
--
--	# In addition, on some systems there is a problem with perl and NDBM
--	# which causes AnyDBM and NDBM_File to lock up. This is evidenced
--	# in the tests as AnyDBM just freezing.  Apparently, this only
--	# happens on a.out systems, so we disable NDBM for all a.out linux
--	# systems.  If someone can suggest a more robust test
--	#  that would be appreciated.
--	#
--	# More info:
--	# Date: Wed, 7 Feb 1996 03:21:04 +0900
--	# From: Jeffrey Friedl <jfriedl@nff.ncl.omron.co.jp>
--	#
--	# I tried compiling with DBM support and sure enough things locked up
--	# just as advertised. Checking into it, I found that the lockup was
--	# during the call to dbm_open. Not *in* dbm_open -- but between the call
--	# to and the jump into.
--	#
--	# To make a long story short, making sure that the *.a and *.sa pairs of
--	#   /usr/lib/lib{m,db,gdbm}.{a,sa}
--	# were perfectly in sync took care of it.
--	#
--	# This will generate a harmless Whoa There! message
--	case "$d_dbm_open" in
--	'')	cat <<'EOM' >&4
--
--Disabling ndbm.  This will generate a Whoa There message in Configure.
--Read hints/linux.sh for further information.
--EOM
--		# You can override this with Configure -Dd_dbm_open
--		d_dbm_open=undef
--		;;
--	esac
--fi
--
--rm -f try.c a.out
--
- if ${sh:-/bin/sh} -c exit; then
-   echo ''
-   echo 'You appear to have a working bash.  Good.'
-diff --git a/pp.c b/pp.c
-index 3173c5a..f2a37bd 100644
---- a/pp.c
-+++ b/pp.c
-@@ -3624,8 +3624,12 @@ PP(pp_crypt)
- #if defined(__GLIBC__) || defined(__EMX__)
- 	if (PL_reentrant_buffer->_crypt_struct_buffer) {
- 	    PL_reentrant_buffer->_crypt_struct_buffer->initialized = 0;
--	    /* work around glibc-2.2.5 bug */
-+#if (defined(__GLIBC__) && __GLIBC__ == 2) && \
-+    (defined(__GLIBC_MINOR__) && __GLIBC_MINOR__ >= 2 && __GLIBC_MINOR__ < 4)
-+	    /* work around glibc-2.2.5 bug, has been fixed at some
-+	     * time in glibc-2.3.X */
- 	    PL_reentrant_buffer->_crypt_struct_buffer->current_saltbits = 0;
-+#endif
- 	}
- #endif
-     }

5.022.004-main,debugging,quadmath-buster/Dockerfile

@@ -1,59 +0,0 @@
-FROM debian:buster-backports
-LABEL maintainer="Ryan Voots <simcop@cpan.org>"
-
-COPY *.patch /usr/src/perl/
-WORKDIR /usr/src/perl
-
-ENV DEBIAN_FRONTEND=noninteractive
-
-RUN perl -i.bak -pE '$x=$_; $x=~s|^deb |deb-src |g;$_.=$x' /etc/apt/sources.list \
-    && apt update \
-    && apt -yq full-upgrade \
-    && apt -yq build-dep perl \
-    &&     apt-get install -y --no-install-recommends \
-       bzip2 \
-       ca-certificates \
-       # cpio \
-       curl \
-       dpkg-dev \
-       # file \
-       gcc \
-       # g++ \
-       libbz2-dev \
-       libdb-dev \
-       libc6-dev \
-       libgdbm-dev \
-       liblzma-dev \
-       make \
-       netbase \
-       patch \
-       procps \
-       zlib1g-dev \
-       xz-utils \
-    && curl -SL https://www.cpan.org/src/5.0/perl-5.22.4.tar.xz -o perl-5.22.4.tar.xz \
-    && echo '713243dce27d7aa0bdbf52b2070de5ce449f9ffbcc14a93efbc6f2beff0f5ce8 *perl-5.22.4.tar.xz' | sha256sum -c -
-RUN tar --strip-components=1 -xaf perl-5.22.4.tar.xz -C /usr/src/perl \
-    && rm perl-5.22.4.tar.xz \
-    && cat *.patch | patch -p1 \
-    && echo 'print "1..0 # Skipped: Tests are invalid"' > /usr/src/perl/ext/GDBM_File/t/fatal.t
-RUN gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)" \
-    && archBits="$(dpkg-architecture --query DEB_BUILD_ARCH_BITS)" \
-    && archFlag="$([ "$archBits" = '64' ] && echo '-Duse64bitall' || echo '-Duse64bitint')" \
-    && ./Configure -Darchname="$gnuArch" "$archFlag" -Accflags=-ggdb -DDEBUGGING -Dusequadmath -Duseshrplib -Dvendorprefix=/usr/local -Aldflags='-Wl,-z,now -Wl,-zrelro -Wl,-z,noexecstack' -Accflags='-fpie -fPIC -fstack-protector-all -pie -D_FORTIFY_SOURCE=2' -Duseshrplib  -des \
-    && make -j$(nproc) \
-    && TEST_JOBS=$(nproc) make test_harness
-RUN make install \
-    && cd /usr/src \
-    && curl -LO https://www.cpan.org/authors/id/M/MI/MIYAGAWA/App-cpanminus-1.7044.tar.gz \
-    && echo '9b60767fe40752ef7a9d3f13f19060a63389a5c23acc3e9827e19b75500f81f3 *App-cpanminus-1.7044.tar.gz' | sha256sum -c - \
-    && tar -xzf App-cpanminus-1.7044.tar.gz && cd App-cpanminus-1.7044 && perl bin/cpanm . && cd /root \
-    && savedPackages="make netbase" \
-    && apt-mark auto '.*' > /dev/null \
-    && apt-mark manual $savedPackages \
-    && apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false \
-    && rm -fr /var/cache/apt/* /var/lib/apt/lists/* \
-    && rm -fr ./cpanm /root/.cpanm /usr/src/perl /usr/src/App-cpanminus-1.7044* /tmp/*
-
-WORKDIR /
-
-CMD ["perl5.22.4","-de0"]

5.022.004-main,debugging,threaded-bullseye/DevelPatchPerl.patch

@@ -1,264 +0,0 @@
-diff --git a/Configure b/Configure
-index 5f5f279..8ce5cbb 100755
---- a/Configure
-+++ b/Configure
-@@ -4658,7 +4658,7 @@ else
- fi
- $rm -f try try.*
- case "$gccversion" in
--1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-+1.*) cpp=`./loc gcc-cpp $cpp $pth` ;;
- esac
- case "$gccversion" in
- '') gccosandvers='' ;;
-@@ -4698,7 +4698,7 @@ esac
- # gcc 3.* complain about adding -Idirectories that they already know about,
- # so we will take those off from locincpth.
- case "$gccversion" in
--3*)
-+3.*)
-     echo "main(){}">try.c
-     for incdir in $locincpth; do
-        warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
-@@ -5410,13 +5410,13 @@ fi
- case "$hint" in
- default|recommended)
- 	case "$gccversion" in
--	1*) dflt="$dflt -fpcc-struct-return" ;;
-+	1.*) dflt="$dflt -fpcc-struct-return" ;;
- 	esac
- 	case "$optimize:$DEBUGGING" in
- 	*-g*:old) dflt="$dflt -DDEBUGGING";;
- 	esac
- 	case "$gccversion" in
--	2*) if $test -d /etc/conf/kconfig.d &&
-+	2.*) if $test -d /etc/conf/kconfig.d &&
- 			$contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- 		then
- 			# Interactive Systems (ISC) POSIX mode.
-@@ -5425,7 +5425,7 @@ default|recommended)
- 		;;
- 	esac
- 	case "$gccversion" in
--	1*) ;;
-+	1.*) ;;
- 	2.[0-8]*) ;;
- 	?*)	set strict-aliasing -fno-strict-aliasing
- 		eval $checkccflag
-@@ -5534,7 +5534,7 @@ case "$cppflags" in
- *)  cppflags="$cppflags $ccflags" ;;
- esac
- case "$gccversion" in
--1*) cppflags="$cppflags -D__GNUC__"
-+1.*) cppflags="$cppflags -D__GNUC__"
- esac
- case "$mips_type" in
- '');;
-@@ -23010,7 +23010,7 @@ fi
- 
- : add -D_FORTIFY_SOURCE if feasible and not already there
- case "$gccversion" in
--[45].*)	case "$optimize$ccflags" in
-+[456789].*|[1-9][0-9]*)	case "$optimize$ccflags" in
- 	*-O*)	case "$ccflags$cppsymbols" in
- 		*_FORTIFY_SOURCE=*) # Don't add it again.
- 			echo "You seem to have -D_FORTIFY_SOURCE already, not adding it." >&4
-diff --git a/cpan/Time-Local/t/Local.t b/cpan/Time-Local/t/Local.t
-index 472e71a..0a852a0 100644
---- a/cpan/Time-Local/t/Local.t
-+++ b/cpan/Time-Local/t/Local.t
-@@ -91,7 +91,7 @@ for (@time, @neg_time) {
- 
-         # Test timelocal()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timelocal($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = localtime($time);
-@@ -107,7 +107,7 @@ for (@time, @neg_time) {
- 
-         # Test timegm()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timegm($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = gmtime($time);
-@@ -125,7 +125,6 @@ for (@time, @neg_time) {
- 
- for (@bad_time) {
-     my($year, $mon, $mday, $hour, $min, $sec) = @$_;
--    $year -= 1900;
-     $mon--;
- 
-     eval { timegm($sec,$min,$hour,$mday,$mon,$year) };
-@@ -134,14 +133,14 @@ for (@bad_time) {
- }
- 
- {
--    is(timelocal(0,0,1,1,0,90) - timelocal(0,0,0,1,0,90), 3600,
-+    is(timelocal(0,0,1,1,0,1990) - timelocal(0,0,0,1,0,1990), 3600,
-        'one hour difference between two calls to timelocal');
- 
--    is(timelocal(1,2,3,1,0,100) - timelocal(1,2,3,31,11,99), 24 * 3600,
-+    is(timelocal(1,2,3,1,0,2000) - timelocal(1,2,3,31,11,1999), 24 * 3600,
-        'one day difference between two calls to timelocal');
- 
-     # Diff beween Jan 1, 1980 and Mar 1, 1980 = (31 + 29 = 60 days)
--    is(timegm(0,0,0, 1, 2, 80) - timegm(0,0,0, 1, 0, 80), 60 * 24 * 3600,
-+    is(timegm(0,0,0, 1, 2, 1980) - timegm(0,0,0, 1, 0, 1980), 60 * 24 * 3600,
-        '60 day difference between two calls to timegm');
- }
- 
-diff --git a/hints/linux.sh b/hints/linux.sh
-index fb5a46e..c749f0f 100644
---- a/hints/linux.sh
-+++ b/hints/linux.sh
-@@ -85,7 +85,7 @@ uname_minus_m="${uname_minus_m:-"$targetarch"}"
- 
- # Check if we're about to use Intel's ICC compiler
- case "`${cc:-cc} -V 2>&1`" in
--*"Intel(R) C++ Compiler"*|*"Intel(R) C Compiler"*)
-+*"Intel(R) C"*" Compiler"*)
-     # record the version, formats:
-     # icc (ICC) 10.1 20080801
-     # icpc (ICC) 10.1 20080801
-@@ -165,6 +165,9 @@ esac
- # plibpth to bypass this check.
- if [ -x /usr/bin/gcc ] ; then
-     gcc=/usr/bin/gcc
-+# clang also provides -print-search-dirs
-+elif ${cc:-cc} --version 2>/dev/null | grep -q '^clang ' ; then
-+    gcc=${cc:-cc}
- else
-     gcc=gcc
- fi
-@@ -178,6 +181,16 @@ case "$plibpth" in
-     ;;
- esac
- 
-+# For the musl libc, perl should #define _GNU_SOURCE.  Otherwise, some
-+# available functions, like memem, won't be used.  See the discussion in
-+# [perl #133760].  musl doesn't offer an easy way to identify it, but,
-+# at least on alpine linux, the ldd --version output contains the
-+# string 'musl.'
-+case `ldd --version 2>&1` in
-+    musl*)  ccflags="$ccflags -D_GNU_SOURCE" ;;
-+        *) ;;
-+esac
-+
- # libquadmath is sometimes installed as gcc internal library,
- # so contrary to our usual policy of *not* looking at gcc internal
- # directories we now *do* look at them, in case they contain
-@@ -221,92 +234,6 @@ case "$libc" in
-     ;;
- esac
- 
--# Are we using ELF?  Thanks to Kenneth Albanowski <kjahds@kjahds.com>
--# for this test.
--cat >try.c <<'EOM'
--/* Test for whether ELF binaries are produced */
--#include <fcntl.h>
--#include <stdlib.h>
--#include <unistd.h>
--main() {
--	char buffer[4];
--	int i=open("a.out",O_RDONLY);
--	if(i==-1)
--		exit(1); /* fail */
--	if(read(i,&buffer[0],4)<4)
--		exit(1); /* fail */
--	if(buffer[0] != 127 || buffer[1] != 'E' ||
--           buffer[2] != 'L' || buffer[3] != 'F')
--		exit(1); /* fail */
--	exit(0); /* succeed (yes, it's ELF) */
--}
--EOM
--if ${cc:-gcc} $ccflags $ldflags try.c >/dev/null 2>&1 && $run ./a.out; then
--    cat <<'EOM' >&4
--
--You appear to have ELF support.  I'll try to use it for dynamic loading.
--If dynamic loading doesn't work, read hints/linux.sh for further information.
--EOM
--
--else
--    cat <<'EOM' >&4
--
--You don't have an ELF gcc.  I will use dld if possible.  If you are
--using a version of DLD earlier than 3.2.6, or don't have it at all, you
--should probably upgrade. If you are forced to use 3.2.4, you should
--uncomment a couple of lines in hints/linux.sh and restart Configure so
--that shared libraries will be disallowed.
--
--EOM
--    lddlflags="-r $lddlflags"
--    # These empty values are so that Configure doesn't put in the
--    # Linux ELF values.
--    ccdlflags=' '
--    cccdlflags=' '
--    ccflags="-DOVR_DBL_DIG=14 $ccflags"
--    so='sa'
--    dlext='o'
--    nm_so_opt=' '
--    ## If you are using DLD 3.2.4 which does not support shared libs,
--    ## uncomment the next two lines:
--    #ldflags="-static"
--    #so='none'
--
--	# In addition, on some systems there is a problem with perl and NDBM
--	# which causes AnyDBM and NDBM_File to lock up. This is evidenced
--	# in the tests as AnyDBM just freezing.  Apparently, this only
--	# happens on a.out systems, so we disable NDBM for all a.out linux
--	# systems.  If someone can suggest a more robust test
--	#  that would be appreciated.
--	#
--	# More info:
--	# Date: Wed, 7 Feb 1996 03:21:04 +0900
--	# From: Jeffrey Friedl <jfriedl@nff.ncl.omron.co.jp>
--	#
--	# I tried compiling with DBM support and sure enough things locked up
--	# just as advertised. Checking into it, I found that the lockup was
--	# during the call to dbm_open. Not *in* dbm_open -- but between the call
--	# to and the jump into.
--	#
--	# To make a long story short, making sure that the *.a and *.sa pairs of
--	#   /usr/lib/lib{m,db,gdbm}.{a,sa}
--	# were perfectly in sync took care of it.
--	#
--	# This will generate a harmless Whoa There! message
--	case "$d_dbm_open" in
--	'')	cat <<'EOM' >&4
--
--Disabling ndbm.  This will generate a Whoa There message in Configure.
--Read hints/linux.sh for further information.
--EOM
--		# You can override this with Configure -Dd_dbm_open
--		d_dbm_open=undef
--		;;
--	esac
--fi
--
--rm -f try.c a.out
--
- if ${sh:-/bin/sh} -c exit; then
-   echo ''
-   echo 'You appear to have a working bash.  Good.'
-diff --git a/pp.c b/pp.c
-index 3173c5a..f2a37bd 100644
---- a/pp.c
-+++ b/pp.c
-@@ -3624,8 +3624,12 @@ PP(pp_crypt)
- #if defined(__GLIBC__) || defined(__EMX__)
- 	if (PL_reentrant_buffer->_crypt_struct_buffer) {
- 	    PL_reentrant_buffer->_crypt_struct_buffer->initialized = 0;
--	    /* work around glibc-2.2.5 bug */
-+#if (defined(__GLIBC__) && __GLIBC__ == 2) && \
-+    (defined(__GLIBC_MINOR__) && __GLIBC_MINOR__ >= 2 && __GLIBC_MINOR__ < 4)
-+	    /* work around glibc-2.2.5 bug, has been fixed at some
-+	     * time in glibc-2.3.X */
- 	    PL_reentrant_buffer->_crypt_struct_buffer->current_saltbits = 0;
-+#endif
- 	}
- #endif
-     }

5.022.004-main,debugging,threaded-bullseye/Dockerfile

@@ -1,59 +0,0 @@
-FROM debian:bullseye-backports
-LABEL maintainer="Ryan Voots <simcop@cpan.org>"
-
-COPY *.patch /usr/src/perl/
-WORKDIR /usr/src/perl
-
-ENV DEBIAN_FRONTEND=noninteractive
-
-RUN perl -i.bak -pE '$x=$_; $x=~s|^deb |deb-src |g;$_.=$x' /etc/apt/sources.list \
-    && apt update \
-    && apt -yq full-upgrade \
-    && apt -yq build-dep perl \
-    &&     apt-get install -y --no-install-recommends \
-       bzip2 \
-       ca-certificates \
-       # cpio \
-       curl \
-       dpkg-dev \
-       # file \
-       gcc \
-       # g++ \
-       libbz2-dev \
-       libdb-dev \
-       libc6-dev \
-       libgdbm-dev \
-       liblzma-dev \
-       make \
-       netbase \
-       patch \
-       procps \
-       zlib1g-dev \
-       xz-utils \
-    && curl -SL https://www.cpan.org/src/5.0/perl-5.22.4.tar.xz -o perl-5.22.4.tar.xz \
-    && echo '713243dce27d7aa0bdbf52b2070de5ce449f9ffbcc14a93efbc6f2beff0f5ce8 *perl-5.22.4.tar.xz' | sha256sum -c -
-RUN tar --strip-components=1 -xaf perl-5.22.4.tar.xz -C /usr/src/perl \
-    && rm perl-5.22.4.tar.xz \
-    && cat *.patch | patch -p1 \
-    && echo 'print "1..0 # Skipped: Tests are invalid"' > /usr/src/perl/ext/GDBM_File/t/fatal.t
-RUN gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)" \
-    && archBits="$(dpkg-architecture --query DEB_BUILD_ARCH_BITS)" \
-    && archFlag="$([ "$archBits" = '64' ] && echo '-Duse64bitall' || echo '-Duse64bitint')" \
-    && ./Configure -Darchname="$gnuArch" "$archFlag" -Accflags=-ggdb -DDEBUGGING -Dusethreads -Duseshrplib -Dvendorprefix=/usr/local -Aldflags='-Wl,-z,now -Wl,-zrelro -Wl,-z,noexecstack' -Accflags='-fpie -fPIC -fstack-protector-all -pie -D_FORTIFY_SOURCE=2' -Duseshrplib  -des \
-    && make -j$(nproc) \
-    && TEST_JOBS=$(nproc) make test_harness
-RUN make install \
-    && cd /usr/src \
-    && curl -LO https://www.cpan.org/authors/id/M/MI/MIYAGAWA/App-cpanminus-1.7044.tar.gz \
-    && echo '9b60767fe40752ef7a9d3f13f19060a63389a5c23acc3e9827e19b75500f81f3 *App-cpanminus-1.7044.tar.gz' | sha256sum -c - \
-    && tar -xzf App-cpanminus-1.7044.tar.gz && cd App-cpanminus-1.7044 && perl bin/cpanm . && cd /root \
-    && savedPackages="make netbase" \
-    && apt-mark auto '.*' > /dev/null \
-    && apt-mark manual $savedPackages \
-    && apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false \
-    && rm -fr /var/cache/apt/* /var/lib/apt/lists/* \
-    && rm -fr ./cpanm /root/.cpanm /usr/src/perl /usr/src/App-cpanminus-1.7044* /tmp/*
-
-WORKDIR /
-
-CMD ["perl5.22.4","-de0"]

5.022.004-main,debugging,threaded-buster/DevelPatchPerl.patch

@@ -1,264 +0,0 @@
-diff --git a/Configure b/Configure
-index 5f5f279..8ce5cbb 100755
---- a/Configure
-+++ b/Configure
-@@ -4658,7 +4658,7 @@ else
- fi
- $rm -f try try.*
- case "$gccversion" in
--1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-+1.*) cpp=`./loc gcc-cpp $cpp $pth` ;;
- esac
- case "$gccversion" in
- '') gccosandvers='' ;;
-@@ -4698,7 +4698,7 @@ esac
- # gcc 3.* complain about adding -Idirectories that they already know about,
- # so we will take those off from locincpth.
- case "$gccversion" in
--3*)
-+3.*)
-     echo "main(){}">try.c
-     for incdir in $locincpth; do
-        warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
-@@ -5410,13 +5410,13 @@ fi
- case "$hint" in
- default|recommended)
- 	case "$gccversion" in
--	1*) dflt="$dflt -fpcc-struct-return" ;;
-+	1.*) dflt="$dflt -fpcc-struct-return" ;;
- 	esac
- 	case "$optimize:$DEBUGGING" in
- 	*-g*:old) dflt="$dflt -DDEBUGGING";;
- 	esac
- 	case "$gccversion" in
--	2*) if $test -d /etc/conf/kconfig.d &&
-+	2.*) if $test -d /etc/conf/kconfig.d &&
- 			$contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- 		then
- 			# Interactive Systems (ISC) POSIX mode.
-@@ -5425,7 +5425,7 @@ default|recommended)
- 		;;
- 	esac
- 	case "$gccversion" in
--	1*) ;;
-+	1.*) ;;
- 	2.[0-8]*) ;;
- 	?*)	set strict-aliasing -fno-strict-aliasing
- 		eval $checkccflag
-@@ -5534,7 +5534,7 @@ case "$cppflags" in
- *)  cppflags="$cppflags $ccflags" ;;
- esac
- case "$gccversion" in
--1*) cppflags="$cppflags -D__GNUC__"
-+1.*) cppflags="$cppflags -D__GNUC__"
- esac
- case "$mips_type" in
- '');;
-@@ -23010,7 +23010,7 @@ fi
- 
- : add -D_FORTIFY_SOURCE if feasible and not already there
- case "$gccversion" in
--[45].*)	case "$optimize$ccflags" in
-+[456789].*|[1-9][0-9]*)	case "$optimize$ccflags" in
- 	*-O*)	case "$ccflags$cppsymbols" in
- 		*_FORTIFY_SOURCE=*) # Don't add it again.
- 			echo "You seem to have -D_FORTIFY_SOURCE already, not adding it." >&4
-diff --git a/cpan/Time-Local/t/Local.t b/cpan/Time-Local/t/Local.t
-index 472e71a..0a852a0 100644
---- a/cpan/Time-Local/t/Local.t
-+++ b/cpan/Time-Local/t/Local.t
-@@ -91,7 +91,7 @@ for (@time, @neg_time) {
- 
-         # Test timelocal()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timelocal($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = localtime($time);
-@@ -107,7 +107,7 @@ for (@time, @neg_time) {
- 
-         # Test timegm()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timegm($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = gmtime($time);
-@@ -125,7 +125,6 @@ for (@time, @neg_time) {
- 
- for (@bad_time) {
-     my($year, $mon, $mday, $hour, $min, $sec) = @$_;
--    $year -= 1900;
-     $mon--;
- 
-     eval { timegm($sec,$min,$hour,$mday,$mon,$year) };
-@@ -134,14 +133,14 @@ for (@bad_time) {
- }
- 
- {
--    is(timelocal(0,0,1,1,0,90) - timelocal(0,0,0,1,0,90), 3600,
-+    is(timelocal(0,0,1,1,0,1990) - timelocal(0,0,0,1,0,1990), 3600,
-        'one hour difference between two calls to timelocal');
- 
--    is(timelocal(1,2,3,1,0,100) - timelocal(1,2,3,31,11,99), 24 * 3600,
-+    is(timelocal(1,2,3,1,0,2000) - timelocal(1,2,3,31,11,1999), 24 * 3600,
-        'one day difference between two calls to timelocal');
- 
-     # Diff beween Jan 1, 1980 and Mar 1, 1980 = (31 + 29 = 60 days)
--    is(timegm(0,0,0, 1, 2, 80) - timegm(0,0,0, 1, 0, 80), 60 * 24 * 3600,
-+    is(timegm(0,0,0, 1, 2, 1980) - timegm(0,0,0, 1, 0, 1980), 60 * 24 * 3600,
-        '60 day difference between two calls to timegm');
- }
- 
-diff --git a/hints/linux.sh b/hints/linux.sh
-index fb5a46e..c749f0f 100644
---- a/hints/linux.sh
-+++ b/hints/linux.sh
-@@ -85,7 +85,7 @@ uname_minus_m="${uname_minus_m:-"$targetarch"}"
- 
- # Check if we're about to use Intel's ICC compiler
- case "`${cc:-cc} -V 2>&1`" in
--*"Intel(R) C++ Compiler"*|*"Intel(R) C Compiler"*)
-+*"Intel(R) C"*" Compiler"*)
-     # record the version, formats:
-     # icc (ICC) 10.1 20080801
-     # icpc (ICC) 10.1 20080801
-@@ -165,6 +165,9 @@ esac
- # plibpth to bypass this check.
- if [ -x /usr/bin/gcc ] ; then
-     gcc=/usr/bin/gcc
-+# clang also provides -print-search-dirs
-+elif ${cc:-cc} --version 2>/dev/null | grep -q '^clang ' ; then
-+    gcc=${cc:-cc}
- else
-     gcc=gcc
- fi
-@@ -178,6 +181,16 @@ case "$plibpth" in
-     ;;
- esac
- 
-+# For the musl libc, perl should #define _GNU_SOURCE.  Otherwise, some
-+# available functions, like memem, won't be used.  See the discussion in
-+# [perl #133760].  musl doesn't offer an easy way to identify it, but,
-+# at least on alpine linux, the ldd --version output contains the
-+# string 'musl.'
-+case `ldd --version 2>&1` in
-+    musl*)  ccflags="$ccflags -D_GNU_SOURCE" ;;
-+        *) ;;
-+esac
-+
- # libquadmath is sometimes installed as gcc internal library,
- # so contrary to our usual policy of *not* looking at gcc internal
- # directories we now *do* look at them, in case they contain
-@@ -221,92 +234,6 @@ case "$libc" in
-     ;;
- esac
- 
--# Are we using ELF?  Thanks to Kenneth Albanowski <kjahds@kjahds.com>
--# for this test.
--cat >try.c <<'EOM'
--/* Test for whether ELF binaries are produced */
--#include <fcntl.h>
--#include <stdlib.h>
--#include <unistd.h>
--main() {
--	char buffer[4];
--	int i=open("a.out",O_RDONLY);
--	if(i==-1)
--		exit(1); /* fail */
--	if(read(i,&buffer[0],4)<4)
--		exit(1); /* fail */
--	if(buffer[0] != 127 || buffer[1] != 'E' ||
--           buffer[2] != 'L' || buffer[3] != 'F')
--		exit(1); /* fail */
--	exit(0); /* succeed (yes, it's ELF) */
--}
--EOM
--if ${cc:-gcc} $ccflags $ldflags try.c >/dev/null 2>&1 && $run ./a.out; then
--    cat <<'EOM' >&4
--
--You appear to have ELF support.  I'll try to use it for dynamic loading.
--If dynamic loading doesn't work, read hints/linux.sh for further information.
--EOM
--
--else
--    cat <<'EOM' >&4
--
--You don't have an ELF gcc.  I will use dld if possible.  If you are
--using a version of DLD earlier than 3.2.6, or don't have it at all, you
--should probably upgrade. If you are forced to use 3.2.4, you should
--uncomment a couple of lines in hints/linux.sh and restart Configure so
--that shared libraries will be disallowed.
--
--EOM
--    lddlflags="-r $lddlflags"
--    # These empty values are so that Configure doesn't put in the
--    # Linux ELF values.
--    ccdlflags=' '
--    cccdlflags=' '
--    ccflags="-DOVR_DBL_DIG=14 $ccflags"
--    so='sa'
--    dlext='o'
--    nm_so_opt=' '
--    ## If you are using DLD 3.2.4 which does not support shared libs,
--    ## uncomment the next two lines:
--    #ldflags="-static"
--    #so='none'
--
--	# In addition, on some systems there is a problem with perl and NDBM
--	# which causes AnyDBM and NDBM_File to lock up. This is evidenced
--	# in the tests as AnyDBM just freezing.  Apparently, this only
--	# happens on a.out systems, so we disable NDBM for all a.out linux
--	# systems.  If someone can suggest a more robust test
--	#  that would be appreciated.
--	#
--	# More info:
--	# Date: Wed, 7 Feb 1996 03:21:04 +0900
--	# From: Jeffrey Friedl <jfriedl@nff.ncl.omron.co.jp>
--	#
--	# I tried compiling with DBM support and sure enough things locked up
--	# just as advertised. Checking into it, I found that the lockup was
--	# during the call to dbm_open. Not *in* dbm_open -- but between the call
--	# to and the jump into.
--	#
--	# To make a long story short, making sure that the *.a and *.sa pairs of
--	#   /usr/lib/lib{m,db,gdbm}.{a,sa}
--	# were perfectly in sync took care of it.
--	#
--	# This will generate a harmless Whoa There! message
--	case "$d_dbm_open" in
--	'')	cat <<'EOM' >&4
--
--Disabling ndbm.  This will generate a Whoa There message in Configure.
--Read hints/linux.sh for further information.
--EOM
--		# You can override this with Configure -Dd_dbm_open
--		d_dbm_open=undef
--		;;
--	esac
--fi
--
--rm -f try.c a.out
--
- if ${sh:-/bin/sh} -c exit; then
-   echo ''
-   echo 'You appear to have a working bash.  Good.'
-diff --git a/pp.c b/pp.c
-index 3173c5a..f2a37bd 100644
---- a/pp.c
-+++ b/pp.c
-@@ -3624,8 +3624,12 @@ PP(pp_crypt)
- #if defined(__GLIBC__) || defined(__EMX__)
- 	if (PL_reentrant_buffer->_crypt_struct_buffer) {
- 	    PL_reentrant_buffer->_crypt_struct_buffer->initialized = 0;
--	    /* work around glibc-2.2.5 bug */
-+#if (defined(__GLIBC__) && __GLIBC__ == 2) && \
-+    (defined(__GLIBC_MINOR__) && __GLIBC_MINOR__ >= 2 && __GLIBC_MINOR__ < 4)
-+	    /* work around glibc-2.2.5 bug, has been fixed at some
-+	     * time in glibc-2.3.X */
- 	    PL_reentrant_buffer->_crypt_struct_buffer->current_saltbits = 0;
-+#endif
- 	}
- #endif
-     }

5.022.004-main,debugging,threaded-buster/Dockerfile

@@ -1,59 +0,0 @@
-FROM debian:buster-backports
-LABEL maintainer="Ryan Voots <simcop@cpan.org>"
-
-COPY *.patch /usr/src/perl/
-WORKDIR /usr/src/perl
-
-ENV DEBIAN_FRONTEND=noninteractive
-
-RUN perl -i.bak -pE '$x=$_; $x=~s|^deb |deb-src |g;$_.=$x' /etc/apt/sources.list \
-    && apt update \
-    && apt -yq full-upgrade \
-    && apt -yq build-dep perl \
-    &&     apt-get install -y --no-install-recommends \
-       bzip2 \
-       ca-certificates \
-       # cpio \
-       curl \
-       dpkg-dev \
-       # file \
-       gcc \
-       # g++ \
-       libbz2-dev \
-       libdb-dev \
-       libc6-dev \
-       libgdbm-dev \
-       liblzma-dev \
-       make \
-       netbase \
-       patch \
-       procps \
-       zlib1g-dev \
-       xz-utils \
-    && curl -SL https://www.cpan.org/src/5.0/perl-5.22.4.tar.xz -o perl-5.22.4.tar.xz \
-    && echo '713243dce27d7aa0bdbf52b2070de5ce449f9ffbcc14a93efbc6f2beff0f5ce8 *perl-5.22.4.tar.xz' | sha256sum -c -
-RUN tar --strip-components=1 -xaf perl-5.22.4.tar.xz -C /usr/src/perl \
-    && rm perl-5.22.4.tar.xz \
-    && cat *.patch | patch -p1 \
-    && echo 'print "1..0 # Skipped: Tests are invalid"' > /usr/src/perl/ext/GDBM_File/t/fatal.t
-RUN gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)" \
-    && archBits="$(dpkg-architecture --query DEB_BUILD_ARCH_BITS)" \
-    && archFlag="$([ "$archBits" = '64' ] && echo '-Duse64bitall' || echo '-Duse64bitint')" \
-    && ./Configure -Darchname="$gnuArch" "$archFlag" -Accflags=-ggdb -DDEBUGGING -Dusethreads -Duseshrplib -Dvendorprefix=/usr/local -Aldflags='-Wl,-z,now -Wl,-zrelro -Wl,-z,noexecstack' -Accflags='-fpie -fPIC -fstack-protector-all -pie -D_FORTIFY_SOURCE=2' -Duseshrplib  -des \
-    && make -j$(nproc) \
-    && TEST_JOBS=$(nproc) make test_harness
-RUN make install \
-    && cd /usr/src \
-    && curl -LO https://www.cpan.org/authors/id/M/MI/MIYAGAWA/App-cpanminus-1.7044.tar.gz \
-    && echo '9b60767fe40752ef7a9d3f13f19060a63389a5c23acc3e9827e19b75500f81f3 *App-cpanminus-1.7044.tar.gz' | sha256sum -c - \
-    && tar -xzf App-cpanminus-1.7044.tar.gz && cd App-cpanminus-1.7044 && perl bin/cpanm . && cd /root \
-    && savedPackages="make netbase" \
-    && apt-mark auto '.*' > /dev/null \
-    && apt-mark manual $savedPackages \
-    && apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false \
-    && rm -fr /var/cache/apt/* /var/lib/apt/lists/* \
-    && rm -fr ./cpanm /root/.cpanm /usr/src/perl /usr/src/App-cpanminus-1.7044* /tmp/*
-
-WORKDIR /
-
-CMD ["perl5.22.4","-de0"]

5.022.004-main,debugging-bullseye/DevelPatchPerl.patch

@@ -1,264 +0,0 @@
-diff --git a/Configure b/Configure
-index 5f5f279..8ce5cbb 100755
---- a/Configure
-+++ b/Configure
-@@ -4658,7 +4658,7 @@ else
- fi
- $rm -f try try.*
- case "$gccversion" in
--1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-+1.*) cpp=`./loc gcc-cpp $cpp $pth` ;;
- esac
- case "$gccversion" in
- '') gccosandvers='' ;;
-@@ -4698,7 +4698,7 @@ esac
- # gcc 3.* complain about adding -Idirectories that they already know about,
- # so we will take those off from locincpth.
- case "$gccversion" in
--3*)
-+3.*)
-     echo "main(){}">try.c
-     for incdir in $locincpth; do
-        warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
-@@ -5410,13 +5410,13 @@ fi
- case "$hint" in
- default|recommended)
- 	case "$gccversion" in
--	1*) dflt="$dflt -fpcc-struct-return" ;;
-+	1.*) dflt="$dflt -fpcc-struct-return" ;;
- 	esac
- 	case "$optimize:$DEBUGGING" in
- 	*-g*:old) dflt="$dflt -DDEBUGGING";;
- 	esac
- 	case "$gccversion" in
--	2*) if $test -d /etc/conf/kconfig.d &&
-+	2.*) if $test -d /etc/conf/kconfig.d &&
- 			$contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- 		then
- 			# Interactive Systems (ISC) POSIX mode.
-@@ -5425,7 +5425,7 @@ default|recommended)
- 		;;
- 	esac
- 	case "$gccversion" in
--	1*) ;;
-+	1.*) ;;
- 	2.[0-8]*) ;;
- 	?*)	set strict-aliasing -fno-strict-aliasing
- 		eval $checkccflag
-@@ -5534,7 +5534,7 @@ case "$cppflags" in
- *)  cppflags="$cppflags $ccflags" ;;
- esac
- case "$gccversion" in
--1*) cppflags="$cppflags -D__GNUC__"
-+1.*) cppflags="$cppflags -D__GNUC__"
- esac
- case "$mips_type" in
- '');;
-@@ -23010,7 +23010,7 @@ fi
- 
- : add -D_FORTIFY_SOURCE if feasible and not already there
- case "$gccversion" in
--[45].*)	case "$optimize$ccflags" in
-+[456789].*|[1-9][0-9]*)	case "$optimize$ccflags" in
- 	*-O*)	case "$ccflags$cppsymbols" in
- 		*_FORTIFY_SOURCE=*) # Don't add it again.
- 			echo "You seem to have -D_FORTIFY_SOURCE already, not adding it." >&4
-diff --git a/cpan/Time-Local/t/Local.t b/cpan/Time-Local/t/Local.t
-index 472e71a..0a852a0 100644
---- a/cpan/Time-Local/t/Local.t
-+++ b/cpan/Time-Local/t/Local.t
-@@ -91,7 +91,7 @@ for (@time, @neg_time) {
- 
-         # Test timelocal()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timelocal($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = localtime($time);
-@@ -107,7 +107,7 @@ for (@time, @neg_time) {
- 
-         # Test timegm()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timegm($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = gmtime($time);
-@@ -125,7 +125,6 @@ for (@time, @neg_time) {
- 
- for (@bad_time) {
-     my($year, $mon, $mday, $hour, $min, $sec) = @$_;
--    $year -= 1900;
-     $mon--;
- 
-     eval { timegm($sec,$min,$hour,$mday,$mon,$year) };
-@@ -134,14 +133,14 @@ for (@bad_time) {
- }
- 
- {
--    is(timelocal(0,0,1,1,0,90) - timelocal(0,0,0,1,0,90), 3600,
-+    is(timelocal(0,0,1,1,0,1990) - timelocal(0,0,0,1,0,1990), 3600,
-        'one hour difference between two calls to timelocal');
- 
--    is(timelocal(1,2,3,1,0,100) - timelocal(1,2,3,31,11,99), 24 * 3600,
-+    is(timelocal(1,2,3,1,0,2000) - timelocal(1,2,3,31,11,1999), 24 * 3600,
-        'one day difference between two calls to timelocal');
- 
-     # Diff beween Jan 1, 1980 and Mar 1, 1980 = (31 + 29 = 60 days)
--    is(timegm(0,0,0, 1, 2, 80) - timegm(0,0,0, 1, 0, 80), 60 * 24 * 3600,
-+    is(timegm(0,0,0, 1, 2, 1980) - timegm(0,0,0, 1, 0, 1980), 60 * 24 * 3600,
-        '60 day difference between two calls to timegm');
- }
- 
-diff --git a/hints/linux.sh b/hints/linux.sh
-index fb5a46e..c749f0f 100644
---- a/hints/linux.sh
-+++ b/hints/linux.sh
-@@ -85,7 +85,7 @@ uname_minus_m="${uname_minus_m:-"$targetarch"}"
- 
- # Check if we're about to use Intel's ICC compiler
- case "`${cc:-cc} -V 2>&1`" in
--*"Intel(R) C++ Compiler"*|*"Intel(R) C Compiler"*)
-+*"Intel(R) C"*" Compiler"*)
-     # record the version, formats:
-     # icc (ICC) 10.1 20080801
-     # icpc (ICC) 10.1 20080801
-@@ -165,6 +165,9 @@ esac
- # plibpth to bypass this check.
- if [ -x /usr/bin/gcc ] ; then
-     gcc=/usr/bin/gcc
-+# clang also provides -print-search-dirs
-+elif ${cc:-cc} --version 2>/dev/null | grep -q '^clang ' ; then
-+    gcc=${cc:-cc}
- else
-     gcc=gcc
- fi
-@@ -178,6 +181,16 @@ case "$plibpth" in
-     ;;
- esac
- 
-+# For the musl libc, perl should #define _GNU_SOURCE.  Otherwise, some
-+# available functions, like memem, won't be used.  See the discussion in
-+# [perl #133760].  musl doesn't offer an easy way to identify it, but,
-+# at least on alpine linux, the ldd --version output contains the
-+# string 'musl.'
-+case `ldd --version 2>&1` in
-+    musl*)  ccflags="$ccflags -D_GNU_SOURCE" ;;
-+        *) ;;
-+esac
-+
- # libquadmath is sometimes installed as gcc internal library,
- # so contrary to our usual policy of *not* looking at gcc internal
- # directories we now *do* look at them, in case they contain
-@@ -221,92 +234,6 @@ case "$libc" in
-     ;;
- esac
- 
--# Are we using ELF?  Thanks to Kenneth Albanowski <kjahds@kjahds.com>
--# for this test.
--cat >try.c <<'EOM'
--/* Test for whether ELF binaries are produced */
--#include <fcntl.h>
--#include <stdlib.h>
--#include <unistd.h>
--main() {
--	char buffer[4];
--	int i=open("a.out",O_RDONLY);
--	if(i==-1)
--		exit(1); /* fail */
--	if(read(i,&buffer[0],4)<4)
--		exit(1); /* fail */
--	if(buffer[0] != 127 || buffer[1] != 'E' ||
--           buffer[2] != 'L' || buffer[3] != 'F')
--		exit(1); /* fail */
--	exit(0); /* succeed (yes, it's ELF) */
--}
--EOM
--if ${cc:-gcc} $ccflags $ldflags try.c >/dev/null 2>&1 && $run ./a.out; then
--    cat <<'EOM' >&4
--
--You appear to have ELF support.  I'll try to use it for dynamic loading.
--If dynamic loading doesn't work, read hints/linux.sh for further information.
--EOM
--
--else
--    cat <<'EOM' >&4
--
--You don't have an ELF gcc.  I will use dld if possible.  If you are
--using a version of DLD earlier than 3.2.6, or don't have it at all, you
--should probably upgrade. If you are forced to use 3.2.4, you should
--uncomment a couple of lines in hints/linux.sh and restart Configure so
--that shared libraries will be disallowed.
--
--EOM
--    lddlflags="-r $lddlflags"
--    # These empty values are so that Configure doesn't put in the
--    # Linux ELF values.
--    ccdlflags=' '
--    cccdlflags=' '
--    ccflags="-DOVR_DBL_DIG=14 $ccflags"
--    so='sa'
--    dlext='o'
--    nm_so_opt=' '
--    ## If you are using DLD 3.2.4 which does not support shared libs,
--    ## uncomment the next two lines:
--    #ldflags="-static"
--    #so='none'
--
--	# In addition, on some systems there is a problem with perl and NDBM
--	# which causes AnyDBM and NDBM_File to lock up. This is evidenced
--	# in the tests as AnyDBM just freezing.  Apparently, this only
--	# happens on a.out systems, so we disable NDBM for all a.out linux
--	# systems.  If someone can suggest a more robust test
--	#  that would be appreciated.
--	#
--	# More info:
--	# Date: Wed, 7 Feb 1996 03:21:04 +0900
--	# From: Jeffrey Friedl <jfriedl@nff.ncl.omron.co.jp>
--	#
--	# I tried compiling with DBM support and sure enough things locked up
--	# just as advertised. Checking into it, I found that the lockup was
--	# during the call to dbm_open. Not *in* dbm_open -- but between the call
--	# to and the jump into.
--	#
--	# To make a long story short, making sure that the *.a and *.sa pairs of
--	#   /usr/lib/lib{m,db,gdbm}.{a,sa}
--	# were perfectly in sync took care of it.
--	#
--	# This will generate a harmless Whoa There! message
--	case "$d_dbm_open" in
--	'')	cat <<'EOM' >&4
--
--Disabling ndbm.  This will generate a Whoa There message in Configure.
--Read hints/linux.sh for further information.
--EOM
--		# You can override this with Configure -Dd_dbm_open
--		d_dbm_open=undef
--		;;
--	esac
--fi
--
--rm -f try.c a.out
--
- if ${sh:-/bin/sh} -c exit; then
-   echo ''
-   echo 'You appear to have a working bash.  Good.'
-diff --git a/pp.c b/pp.c
-index 3173c5a..f2a37bd 100644
---- a/pp.c
-+++ b/pp.c
-@@ -3624,8 +3624,12 @@ PP(pp_crypt)
- #if defined(__GLIBC__) || defined(__EMX__)
- 	if (PL_reentrant_buffer->_crypt_struct_buffer) {
- 	    PL_reentrant_buffer->_crypt_struct_buffer->initialized = 0;
--	    /* work around glibc-2.2.5 bug */
-+#if (defined(__GLIBC__) && __GLIBC__ == 2) && \
-+    (defined(__GLIBC_MINOR__) && __GLIBC_MINOR__ >= 2 && __GLIBC_MINOR__ < 4)
-+	    /* work around glibc-2.2.5 bug, has been fixed at some
-+	     * time in glibc-2.3.X */
- 	    PL_reentrant_buffer->_crypt_struct_buffer->current_saltbits = 0;
-+#endif
- 	}
- #endif
-     }

5.022.004-main,debugging-bullseye/Dockerfile

@@ -1,59 +0,0 @@
-FROM debian:bullseye-backports
-LABEL maintainer="Ryan Voots <simcop@cpan.org>"
-
-COPY *.patch /usr/src/perl/
-WORKDIR /usr/src/perl
-
-ENV DEBIAN_FRONTEND=noninteractive
-
-RUN perl -i.bak -pE '$x=$_; $x=~s|^deb |deb-src |g;$_.=$x' /etc/apt/sources.list \
-    && apt update \
-    && apt -yq full-upgrade \
-    && apt -yq build-dep perl \
-    &&     apt-get install -y --no-install-recommends \
-       bzip2 \
-       ca-certificates \
-       # cpio \
-       curl \
-       dpkg-dev \
-       # file \
-       gcc \
-       # g++ \
-       libbz2-dev \
-       libdb-dev \
-       libc6-dev \
-       libgdbm-dev \
-       liblzma-dev \
-       make \
-       netbase \
-       patch \
-       procps \
-       zlib1g-dev \
-       xz-utils \
-    && curl -SL https://www.cpan.org/src/5.0/perl-5.22.4.tar.xz -o perl-5.22.4.tar.xz \
-    && echo '713243dce27d7aa0bdbf52b2070de5ce449f9ffbcc14a93efbc6f2beff0f5ce8 *perl-5.22.4.tar.xz' | sha256sum -c -
-RUN tar --strip-components=1 -xaf perl-5.22.4.tar.xz -C /usr/src/perl \
-    && rm perl-5.22.4.tar.xz \
-    && cat *.patch | patch -p1 \
-    && echo 'print "1..0 # Skipped: Tests are invalid"' > /usr/src/perl/ext/GDBM_File/t/fatal.t
-RUN gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)" \
-    && archBits="$(dpkg-architecture --query DEB_BUILD_ARCH_BITS)" \
-    && archFlag="$([ "$archBits" = '64' ] && echo '-Duse64bitall' || echo '-Duse64bitint')" \
-    && ./Configure -Darchname="$gnuArch" "$archFlag" -Accflags=-ggdb -DDEBUGGING -Duseshrplib -Dvendorprefix=/usr/local -Aldflags='-Wl,-z,now -Wl,-zrelro -Wl,-z,noexecstack' -Accflags='-fpie -fPIC -fstack-protector-all -pie -D_FORTIFY_SOURCE=2' -Duseshrplib  -des \
-    && make -j$(nproc) \
-    && TEST_JOBS=$(nproc) make test_harness
-RUN make install \
-    && cd /usr/src \
-    && curl -LO https://www.cpan.org/authors/id/M/MI/MIYAGAWA/App-cpanminus-1.7044.tar.gz \
-    && echo '9b60767fe40752ef7a9d3f13f19060a63389a5c23acc3e9827e19b75500f81f3 *App-cpanminus-1.7044.tar.gz' | sha256sum -c - \
-    && tar -xzf App-cpanminus-1.7044.tar.gz && cd App-cpanminus-1.7044 && perl bin/cpanm . && cd /root \
-    && savedPackages="make netbase" \
-    && apt-mark auto '.*' > /dev/null \
-    && apt-mark manual $savedPackages \
-    && apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false \
-    && rm -fr /var/cache/apt/* /var/lib/apt/lists/* \
-    && rm -fr ./cpanm /root/.cpanm /usr/src/perl /usr/src/App-cpanminus-1.7044* /tmp/*
-
-WORKDIR /
-
-CMD ["perl5.22.4","-de0"]

5.022.004-main,debugging-buster/DevelPatchPerl.patch

@@ -1,264 +0,0 @@
-diff --git a/Configure b/Configure
-index 5f5f279..8ce5cbb 100755
---- a/Configure
-+++ b/Configure
-@@ -4658,7 +4658,7 @@ else
- fi
- $rm -f try try.*
- case "$gccversion" in
--1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-+1.*) cpp=`./loc gcc-cpp $cpp $pth` ;;
- esac
- case "$gccversion" in
- '') gccosandvers='' ;;
-@@ -4698,7 +4698,7 @@ esac
- # gcc 3.* complain about adding -Idirectories that they already know about,
- # so we will take those off from locincpth.
- case "$gccversion" in
--3*)
-+3.*)
-     echo "main(){}">try.c
-     for incdir in $locincpth; do
-        warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
-@@ -5410,13 +5410,13 @@ fi
- case "$hint" in
- default|recommended)
- 	case "$gccversion" in
--	1*) dflt="$dflt -fpcc-struct-return" ;;
-+	1.*) dflt="$dflt -fpcc-struct-return" ;;
- 	esac
- 	case "$optimize:$DEBUGGING" in
- 	*-g*:old) dflt="$dflt -DDEBUGGING";;
- 	esac
- 	case "$gccversion" in
--	2*) if $test -d /etc/conf/kconfig.d &&
-+	2.*) if $test -d /etc/conf/kconfig.d &&
- 			$contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- 		then
- 			# Interactive Systems (ISC) POSIX mode.
-@@ -5425,7 +5425,7 @@ default|recommended)
- 		;;
- 	esac
- 	case "$gccversion" in
--	1*) ;;
-+	1.*) ;;
- 	2.[0-8]*) ;;
- 	?*)	set strict-aliasing -fno-strict-aliasing
- 		eval $checkccflag
-@@ -5534,7 +5534,7 @@ case "$cppflags" in
- *)  cppflags="$cppflags $ccflags" ;;
- esac
- case "$gccversion" in
--1*) cppflags="$cppflags -D__GNUC__"
-+1.*) cppflags="$cppflags -D__GNUC__"
- esac
- case "$mips_type" in
- '');;
-@@ -23010,7 +23010,7 @@ fi
- 
- : add -D_FORTIFY_SOURCE if feasible and not already there
- case "$gccversion" in
--[45].*)	case "$optimize$ccflags" in
-+[456789].*|[1-9][0-9]*)	case "$optimize$ccflags" in
- 	*-O*)	case "$ccflags$cppsymbols" in
- 		*_FORTIFY_SOURCE=*) # Don't add it again.
- 			echo "You seem to have -D_FORTIFY_SOURCE already, not adding it." >&4
-diff --git a/cpan/Time-Local/t/Local.t b/cpan/Time-Local/t/Local.t
-index 472e71a..0a852a0 100644
---- a/cpan/Time-Local/t/Local.t
-+++ b/cpan/Time-Local/t/Local.t
-@@ -91,7 +91,7 @@ for (@time, @neg_time) {
- 
-         # Test timelocal()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timelocal($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = localtime($time);
-@@ -107,7 +107,7 @@ for (@time, @neg_time) {
- 
-         # Test timegm()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timegm($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = gmtime($time);
-@@ -125,7 +125,6 @@ for (@time, @neg_time) {
- 
- for (@bad_time) {
-     my($year, $mon, $mday, $hour, $min, $sec) = @$_;
--    $year -= 1900;
-     $mon--;
- 
-     eval { timegm($sec,$min,$hour,$mday,$mon,$year) };
-@@ -134,14 +133,14 @@ for (@bad_time) {
- }
- 
- {
--    is(timelocal(0,0,1,1,0,90) - timelocal(0,0,0,1,0,90), 3600,
-+    is(timelocal(0,0,1,1,0,1990) - timelocal(0,0,0,1,0,1990), 3600,
-        'one hour difference between two calls to timelocal');
- 
--    is(timelocal(1,2,3,1,0,100) - timelocal(1,2,3,31,11,99), 24 * 3600,
-+    is(timelocal(1,2,3,1,0,2000) - timelocal(1,2,3,31,11,1999), 24 * 3600,
-        'one day difference between two calls to timelocal');
- 
-     # Diff beween Jan 1, 1980 and Mar 1, 1980 = (31 + 29 = 60 days)
--    is(timegm(0,0,0, 1, 2, 80) - timegm(0,0,0, 1, 0, 80), 60 * 24 * 3600,
-+    is(timegm(0,0,0, 1, 2, 1980) - timegm(0,0,0, 1, 0, 1980), 60 * 24 * 3600,
-        '60 day difference between two calls to timegm');
- }
- 
-diff --git a/hints/linux.sh b/hints/linux.sh
-index fb5a46e..c749f0f 100644
---- a/hints/linux.sh
-+++ b/hints/linux.sh
-@@ -85,7 +85,7 @@ uname_minus_m="${uname_minus_m:-"$targetarch"}"
- 
- # Check if we're about to use Intel's ICC compiler
- case "`${cc:-cc} -V 2>&1`" in
--*"Intel(R) C++ Compiler"*|*"Intel(R) C Compiler"*)
-+*"Intel(R) C"*" Compiler"*)
-     # record the version, formats:
-     # icc (ICC) 10.1 20080801
-     # icpc (ICC) 10.1 20080801
-@@ -165,6 +165,9 @@ esac
- # plibpth to bypass this check.
- if [ -x /usr/bin/gcc ] ; then
-     gcc=/usr/bin/gcc
-+# clang also provides -print-search-dirs
-+elif ${cc:-cc} --version 2>/dev/null | grep -q '^clang ' ; then
-+    gcc=${cc:-cc}
- else
-     gcc=gcc
- fi
-@@ -178,6 +181,16 @@ case "$plibpth" in
-     ;;
- esac
- 
-+# For the musl libc, perl should #define _GNU_SOURCE.  Otherwise, some
-+# available functions, like memem, won't be used.  See the discussion in
-+# [perl #133760].  musl doesn't offer an easy way to identify it, but,
-+# at least on alpine linux, the ldd --version output contains the
-+# string 'musl.'
-+case `ldd --version 2>&1` in
-+    musl*)  ccflags="$ccflags -D_GNU_SOURCE" ;;
-+        *) ;;
-+esac
-+
- # libquadmath is sometimes installed as gcc internal library,
- # so contrary to our usual policy of *not* looking at gcc internal
- # directories we now *do* look at them, in case they contain
-@@ -221,92 +234,6 @@ case "$libc" in
-     ;;
- esac
- 
--# Are we using ELF?  Thanks to Kenneth Albanowski <kjahds@kjahds.com>
--# for this test.
--cat >try.c <<'EOM'
--/* Test for whether ELF binaries are produced */
--#include <fcntl.h>
--#include <stdlib.h>
--#include <unistd.h>
--main() {
--	char buffer[4];
--	int i=open("a.out",O_RDONLY);
--	if(i==-1)
--		exit(1); /* fail */
--	if(read(i,&buffer[0],4)<4)
--		exit(1); /* fail */
--	if(buffer[0] != 127 || buffer[1] != 'E' ||
--           buffer[2] != 'L' || buffer[3] != 'F')
--		exit(1); /* fail */
--	exit(0); /* succeed (yes, it's ELF) */
--}
--EOM
--if ${cc:-gcc} $ccflags $ldflags try.c >/dev/null 2>&1 && $run ./a.out; then
--    cat <<'EOM' >&4
--
--You appear to have ELF support.  I'll try to use it for dynamic loading.
--If dynamic loading doesn't work, read hints/linux.sh for further information.
--EOM
--
--else
--    cat <<'EOM' >&4
--
--You don't have an ELF gcc.  I will use dld if possible.  If you are
--using a version of DLD earlier than 3.2.6, or don't have it at all, you
--should probably upgrade. If you are forced to use 3.2.4, you should
--uncomment a couple of lines in hints/linux.sh and restart Configure so
--that shared libraries will be disallowed.
--
--EOM
--    lddlflags="-r $lddlflags"
--    # These empty values are so that Configure doesn't put in the
--    # Linux ELF values.
--    ccdlflags=' '
--    cccdlflags=' '
--    ccflags="-DOVR_DBL_DIG=14 $ccflags"
--    so='sa'
--    dlext='o'
--    nm_so_opt=' '
--    ## If you are using DLD 3.2.4 which does not support shared libs,
--    ## uncomment the next two lines:
--    #ldflags="-static"
--    #so='none'
--
--	# In addition, on some systems there is a problem with perl and NDBM
--	# which causes AnyDBM and NDBM_File to lock up. This is evidenced
--	# in the tests as AnyDBM just freezing.  Apparently, this only
--	# happens on a.out systems, so we disable NDBM for all a.out linux
--	# systems.  If someone can suggest a more robust test
--	#  that would be appreciated.
--	#
--	# More info:
--	# Date: Wed, 7 Feb 1996 03:21:04 +0900
--	# From: Jeffrey Friedl <jfriedl@nff.ncl.omron.co.jp>
--	#
--	# I tried compiling with DBM support and sure enough things locked up
--	# just as advertised. Checking into it, I found that the lockup was
--	# during the call to dbm_open. Not *in* dbm_open -- but between the call
--	# to and the jump into.
--	#
--	# To make a long story short, making sure that the *.a and *.sa pairs of
--	#   /usr/lib/lib{m,db,gdbm}.{a,sa}
--	# were perfectly in sync took care of it.
--	#
--	# This will generate a harmless Whoa There! message
--	case "$d_dbm_open" in
--	'')	cat <<'EOM' >&4
--
--Disabling ndbm.  This will generate a Whoa There message in Configure.
--Read hints/linux.sh for further information.
--EOM
--		# You can override this with Configure -Dd_dbm_open
--		d_dbm_open=undef
--		;;
--	esac
--fi
--
--rm -f try.c a.out
--
- if ${sh:-/bin/sh} -c exit; then
-   echo ''
-   echo 'You appear to have a working bash.  Good.'
-diff --git a/pp.c b/pp.c
-index 3173c5a..f2a37bd 100644
---- a/pp.c
-+++ b/pp.c
-@@ -3624,8 +3624,12 @@ PP(pp_crypt)
- #if defined(__GLIBC__) || defined(__EMX__)
- 	if (PL_reentrant_buffer->_crypt_struct_buffer) {
- 	    PL_reentrant_buffer->_crypt_struct_buffer->initialized = 0;
--	    /* work around glibc-2.2.5 bug */
-+#if (defined(__GLIBC__) && __GLIBC__ == 2) && \
-+    (defined(__GLIBC_MINOR__) && __GLIBC_MINOR__ >= 2 && __GLIBC_MINOR__ < 4)
-+	    /* work around glibc-2.2.5 bug, has been fixed at some
-+	     * time in glibc-2.3.X */
- 	    PL_reentrant_buffer->_crypt_struct_buffer->current_saltbits = 0;
-+#endif
- 	}
- #endif
-     }

5.022.004-main,debugging-buster/Dockerfile

@@ -1,59 +0,0 @@
-FROM debian:buster-backports
-LABEL maintainer="Ryan Voots <simcop@cpan.org>"
-
-COPY *.patch /usr/src/perl/
-WORKDIR /usr/src/perl
-
-ENV DEBIAN_FRONTEND=noninteractive
-
-RUN perl -i.bak -pE '$x=$_; $x=~s|^deb |deb-src |g;$_.=$x' /etc/apt/sources.list \
-    && apt update \
-    && apt -yq full-upgrade \
-    && apt -yq build-dep perl \
-    &&     apt-get install -y --no-install-recommends \
-       bzip2 \
-       ca-certificates \
-       # cpio \
-       curl \
-       dpkg-dev \
-       # file \
-       gcc \
-       # g++ \
-       libbz2-dev \
-       libdb-dev \
-       libc6-dev \
-       libgdbm-dev \
-       liblzma-dev \
-       make \
-       netbase \
-       patch \
-       procps \
-       zlib1g-dev \
-       xz-utils \
-    && curl -SL https://www.cpan.org/src/5.0/perl-5.22.4.tar.xz -o perl-5.22.4.tar.xz \
-    && echo '713243dce27d7aa0bdbf52b2070de5ce449f9ffbcc14a93efbc6f2beff0f5ce8 *perl-5.22.4.tar.xz' | sha256sum -c -
-RUN tar --strip-components=1 -xaf perl-5.22.4.tar.xz -C /usr/src/perl \
-    && rm perl-5.22.4.tar.xz \
-    && cat *.patch | patch -p1 \
-    && echo 'print "1..0 # Skipped: Tests are invalid"' > /usr/src/perl/ext/GDBM_File/t/fatal.t
-RUN gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)" \
-    && archBits="$(dpkg-architecture --query DEB_BUILD_ARCH_BITS)" \
-    && archFlag="$([ "$archBits" = '64' ] && echo '-Duse64bitall' || echo '-Duse64bitint')" \
-    && ./Configure -Darchname="$gnuArch" "$archFlag" -Accflags=-ggdb -DDEBUGGING -Duseshrplib -Dvendorprefix=/usr/local -Aldflags='-Wl,-z,now -Wl,-zrelro -Wl,-z,noexecstack' -Accflags='-fpie -fPIC -fstack-protector-all -pie -D_FORTIFY_SOURCE=2' -Duseshrplib  -des \
-    && make -j$(nproc) \
-    && TEST_JOBS=$(nproc) make test_harness
-RUN make install \
-    && cd /usr/src \
-    && curl -LO https://www.cpan.org/authors/id/M/MI/MIYAGAWA/App-cpanminus-1.7044.tar.gz \
-    && echo '9b60767fe40752ef7a9d3f13f19060a63389a5c23acc3e9827e19b75500f81f3 *App-cpanminus-1.7044.tar.gz' | sha256sum -c - \
-    && tar -xzf App-cpanminus-1.7044.tar.gz && cd App-cpanminus-1.7044 && perl bin/cpanm . && cd /root \
-    && savedPackages="make netbase" \
-    && apt-mark auto '.*' > /dev/null \
-    && apt-mark manual $savedPackages \
-    && apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false \
-    && rm -fr /var/cache/apt/* /var/lib/apt/lists/* \
-    && rm -fr ./cpanm /root/.cpanm /usr/src/perl /usr/src/App-cpanminus-1.7044* /tmp/*
-
-WORKDIR /
-
-CMD ["perl5.22.4","-de0"]

5.022.004-main,longdouble,threaded-bullseye/DevelPatchPerl.patch

@@ -1,264 +0,0 @@
-diff --git a/Configure b/Configure
-index 5f5f279..8ce5cbb 100755
---- a/Configure
-+++ b/Configure
-@@ -4658,7 +4658,7 @@ else
- fi
- $rm -f try try.*
- case "$gccversion" in
--1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-+1.*) cpp=`./loc gcc-cpp $cpp $pth` ;;
- esac
- case "$gccversion" in
- '') gccosandvers='' ;;
-@@ -4698,7 +4698,7 @@ esac
- # gcc 3.* complain about adding -Idirectories that they already know about,
- # so we will take those off from locincpth.
- case "$gccversion" in
--3*)
-+3.*)
-     echo "main(){}">try.c
-     for incdir in $locincpth; do
-        warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
-@@ -5410,13 +5410,13 @@ fi
- case "$hint" in
- default|recommended)
- 	case "$gccversion" in
--	1*) dflt="$dflt -fpcc-struct-return" ;;
-+	1.*) dflt="$dflt -fpcc-struct-return" ;;
- 	esac
- 	case "$optimize:$DEBUGGING" in
- 	*-g*:old) dflt="$dflt -DDEBUGGING";;
- 	esac
- 	case "$gccversion" in
--	2*) if $test -d /etc/conf/kconfig.d &&
-+	2.*) if $test -d /etc/conf/kconfig.d &&
- 			$contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- 		then
- 			# Interactive Systems (ISC) POSIX mode.
-@@ -5425,7 +5425,7 @@ default|recommended)
- 		;;
- 	esac
- 	case "$gccversion" in
--	1*) ;;
-+	1.*) ;;
- 	2.[0-8]*) ;;
- 	?*)	set strict-aliasing -fno-strict-aliasing
- 		eval $checkccflag
-@@ -5534,7 +5534,7 @@ case "$cppflags" in
- *)  cppflags="$cppflags $ccflags" ;;
- esac
- case "$gccversion" in
--1*) cppflags="$cppflags -D__GNUC__"
-+1.*) cppflags="$cppflags -D__GNUC__"
- esac
- case "$mips_type" in
- '');;
-@@ -23010,7 +23010,7 @@ fi
- 
- : add -D_FORTIFY_SOURCE if feasible and not already there
- case "$gccversion" in
--[45].*)	case "$optimize$ccflags" in
-+[456789].*|[1-9][0-9]*)	case "$optimize$ccflags" in
- 	*-O*)	case "$ccflags$cppsymbols" in
- 		*_FORTIFY_SOURCE=*) # Don't add it again.
- 			echo "You seem to have -D_FORTIFY_SOURCE already, not adding it." >&4
-diff --git a/cpan/Time-Local/t/Local.t b/cpan/Time-Local/t/Local.t
-index 472e71a..0a852a0 100644
---- a/cpan/Time-Local/t/Local.t
-+++ b/cpan/Time-Local/t/Local.t
-@@ -91,7 +91,7 @@ for (@time, @neg_time) {
- 
-         # Test timelocal()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timelocal($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = localtime($time);
-@@ -107,7 +107,7 @@ for (@time, @neg_time) {
- 
-         # Test timegm()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timegm($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = gmtime($time);
-@@ -125,7 +125,6 @@ for (@time, @neg_time) {
- 
- for (@bad_time) {
-     my($year, $mon, $mday, $hour, $min, $sec) = @$_;
--    $year -= 1900;
-     $mon--;
- 
-     eval { timegm($sec,$min,$hour,$mday,$mon,$year) };
-@@ -134,14 +133,14 @@ for (@bad_time) {
- }
- 
- {
--    is(timelocal(0,0,1,1,0,90) - timelocal(0,0,0,1,0,90), 3600,
-+    is(timelocal(0,0,1,1,0,1990) - timelocal(0,0,0,1,0,1990), 3600,
-        'one hour difference between two calls to timelocal');
- 
--    is(timelocal(1,2,3,1,0,100) - timelocal(1,2,3,31,11,99), 24 * 3600,
-+    is(timelocal(1,2,3,1,0,2000) - timelocal(1,2,3,31,11,1999), 24 * 3600,
-        'one day difference between two calls to timelocal');
- 
-     # Diff beween Jan 1, 1980 and Mar 1, 1980 = (31 + 29 = 60 days)
--    is(timegm(0,0,0, 1, 2, 80) - timegm(0,0,0, 1, 0, 80), 60 * 24 * 3600,
-+    is(timegm(0,0,0, 1, 2, 1980) - timegm(0,0,0, 1, 0, 1980), 60 * 24 * 3600,
-        '60 day difference between two calls to timegm');
- }
- 
-diff --git a/hints/linux.sh b/hints/linux.sh
-index fb5a46e..c749f0f 100644
---- a/hints/linux.sh
-+++ b/hints/linux.sh
-@@ -85,7 +85,7 @@ uname_minus_m="${uname_minus_m:-"$targetarch"}"
- 
- # Check if we're about to use Intel's ICC compiler
- case "`${cc:-cc} -V 2>&1`" in
--*"Intel(R) C++ Compiler"*|*"Intel(R) C Compiler"*)
-+*"Intel(R) C"*" Compiler"*)
-     # record the version, formats:
-     # icc (ICC) 10.1 20080801
-     # icpc (ICC) 10.1 20080801
-@@ -165,6 +165,9 @@ esac
- # plibpth to bypass this check.
- if [ -x /usr/bin/gcc ] ; then
-     gcc=/usr/bin/gcc
-+# clang also provides -print-search-dirs
-+elif ${cc:-cc} --version 2>/dev/null | grep -q '^clang ' ; then
-+    gcc=${cc:-cc}
- else
-     gcc=gcc
- fi
-@@ -178,6 +181,16 @@ case "$plibpth" in
-     ;;
- esac
- 
-+# For the musl libc, perl should #define _GNU_SOURCE.  Otherwise, some
-+# available functions, like memem, won't be used.  See the discussion in
-+# [perl #133760].  musl doesn't offer an easy way to identify it, but,
-+# at least on alpine linux, the ldd --version output contains the
-+# string 'musl.'
-+case `ldd --version 2>&1` in
-+    musl*)  ccflags="$ccflags -D_GNU_SOURCE" ;;
-+        *) ;;
-+esac
-+
- # libquadmath is sometimes installed as gcc internal library,
- # so contrary to our usual policy of *not* looking at gcc internal
- # directories we now *do* look at them, in case they contain
-@@ -221,92 +234,6 @@ case "$libc" in
-     ;;
- esac
- 
--# Are we using ELF?  Thanks to Kenneth Albanowski <kjahds@kjahds.com>
--# for this test.
--cat >try.c <<'EOM'
--/* Test for whether ELF binaries are produced */
--#include <fcntl.h>
--#include <stdlib.h>
--#include <unistd.h>
--main() {
--	char buffer[4];
--	int i=open("a.out",O_RDONLY);
--	if(i==-1)
--		exit(1); /* fail */
--	if(read(i,&buffer[0],4)<4)
--		exit(1); /* fail */
--	if(buffer[0] != 127 || buffer[1] != 'E' ||
--           buffer[2] != 'L' || buffer[3] != 'F')
--		exit(1); /* fail */
--	exit(0); /* succeed (yes, it's ELF) */
--}
--EOM
--if ${cc:-gcc} $ccflags $ldflags try.c >/dev/null 2>&1 && $run ./a.out; then
--    cat <<'EOM' >&4
--
--You appear to have ELF support.  I'll try to use it for dynamic loading.
--If dynamic loading doesn't work, read hints/linux.sh for further information.
--EOM
--
--else
--    cat <<'EOM' >&4
--
--You don't have an ELF gcc.  I will use dld if possible.  If you are
--using a version of DLD earlier than 3.2.6, or don't have it at all, you
--should probably upgrade. If you are forced to use 3.2.4, you should
--uncomment a couple of lines in hints/linux.sh and restart Configure so
--that shared libraries will be disallowed.
--
--EOM
--    lddlflags="-r $lddlflags"
--    # These empty values are so that Configure doesn't put in the
--    # Linux ELF values.
--    ccdlflags=' '
--    cccdlflags=' '
--    ccflags="-DOVR_DBL_DIG=14 $ccflags"
--    so='sa'
--    dlext='o'
--    nm_so_opt=' '
--    ## If you are using DLD 3.2.4 which does not support shared libs,
--    ## uncomment the next two lines:
--    #ldflags="-static"
--    #so='none'
--
--	# In addition, on some systems there is a problem with perl and NDBM
--	# which causes AnyDBM and NDBM_File to lock up. This is evidenced
--	# in the tests as AnyDBM just freezing.  Apparently, this only
--	# happens on a.out systems, so we disable NDBM for all a.out linux
--	# systems.  If someone can suggest a more robust test
--	#  that would be appreciated.
--	#
--	# More info:
--	# Date: Wed, 7 Feb 1996 03:21:04 +0900
--	# From: Jeffrey Friedl <jfriedl@nff.ncl.omron.co.jp>
--	#
--	# I tried compiling with DBM support and sure enough things locked up
--	# just as advertised. Checking into it, I found that the lockup was
--	# during the call to dbm_open. Not *in* dbm_open -- but between the call
--	# to and the jump into.
--	#
--	# To make a long story short, making sure that the *.a and *.sa pairs of
--	#   /usr/lib/lib{m,db,gdbm}.{a,sa}
--	# were perfectly in sync took care of it.
--	#
--	# This will generate a harmless Whoa There! message
--	case "$d_dbm_open" in
--	'')	cat <<'EOM' >&4
--
--Disabling ndbm.  This will generate a Whoa There message in Configure.
--Read hints/linux.sh for further information.
--EOM
--		# You can override this with Configure -Dd_dbm_open
--		d_dbm_open=undef
--		;;
--	esac
--fi
--
--rm -f try.c a.out
--
- if ${sh:-/bin/sh} -c exit; then
-   echo ''
-   echo 'You appear to have a working bash.  Good.'
-diff --git a/pp.c b/pp.c
-index 3173c5a..f2a37bd 100644
---- a/pp.c
-+++ b/pp.c
-@@ -3624,8 +3624,12 @@ PP(pp_crypt)
- #if defined(__GLIBC__) || defined(__EMX__)
- 	if (PL_reentrant_buffer->_crypt_struct_buffer) {
- 	    PL_reentrant_buffer->_crypt_struct_buffer->initialized = 0;
--	    /* work around glibc-2.2.5 bug */
-+#if (defined(__GLIBC__) && __GLIBC__ == 2) && \
-+    (defined(__GLIBC_MINOR__) && __GLIBC_MINOR__ >= 2 && __GLIBC_MINOR__ < 4)
-+	    /* work around glibc-2.2.5 bug, has been fixed at some
-+	     * time in glibc-2.3.X */
- 	    PL_reentrant_buffer->_crypt_struct_buffer->current_saltbits = 0;
-+#endif
- 	}
- #endif
-     }

5.022.004-main,longdouble,threaded-bullseye/Dockerfile

@@ -1,59 +0,0 @@
-FROM debian:bullseye-backports
-LABEL maintainer="Ryan Voots <simcop@cpan.org>"
-
-COPY *.patch /usr/src/perl/
-WORKDIR /usr/src/perl
-
-ENV DEBIAN_FRONTEND=noninteractive
-
-RUN perl -i.bak -pE '$x=$_; $x=~s|^deb |deb-src |g;$_.=$x' /etc/apt/sources.list \
-    && apt update \
-    && apt -yq full-upgrade \
-    && apt -yq build-dep perl \
-    &&     apt-get install -y --no-install-recommends \
-       bzip2 \
-       ca-certificates \
-       # cpio \
-       curl \
-       dpkg-dev \
-       # file \
-       gcc \
-       # g++ \
-       libbz2-dev \
-       libdb-dev \
-       libc6-dev \
-       libgdbm-dev \
-       liblzma-dev \
-       make \
-       netbase \
-       patch \
-       procps \
-       zlib1g-dev \
-       xz-utils \
-    && curl -SL https://www.cpan.org/src/5.0/perl-5.22.4.tar.xz -o perl-5.22.4.tar.xz \
-    && echo '713243dce27d7aa0bdbf52b2070de5ce449f9ffbcc14a93efbc6f2beff0f5ce8 *perl-5.22.4.tar.xz' | sha256sum -c -
-RUN tar --strip-components=1 -xaf perl-5.22.4.tar.xz -C /usr/src/perl \
-    && rm perl-5.22.4.tar.xz \
-    && cat *.patch | patch -p1 \
-    && echo 'print "1..0 # Skipped: Tests are invalid"' > /usr/src/perl/ext/GDBM_File/t/fatal.t
-RUN gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)" \
-    && archBits="$(dpkg-architecture --query DEB_BUILD_ARCH_BITS)" \
-    && archFlag="$([ "$archBits" = '64' ] && echo '-Duse64bitall' || echo '-Duse64bitint')" \
-    && ./Configure -Darchname="$gnuArch" "$archFlag" -Duselongdouble -Dusethreads -Duseshrplib -Dvendorprefix=/usr/local -Aldflags='-Wl,-z,now -Wl,-zrelro -Wl,-z,noexecstack' -Accflags='-fpie -fPIC -fstack-protector-all -pie -D_FORTIFY_SOURCE=2' -Duseshrplib  -des \
-    && make -j$(nproc) \
-    && TEST_JOBS=$(nproc) make test_harness
-RUN make install \
-    && cd /usr/src \
-    && curl -LO https://www.cpan.org/authors/id/M/MI/MIYAGAWA/App-cpanminus-1.7044.tar.gz \
-    && echo '9b60767fe40752ef7a9d3f13f19060a63389a5c23acc3e9827e19b75500f81f3 *App-cpanminus-1.7044.tar.gz' | sha256sum -c - \
-    && tar -xzf App-cpanminus-1.7044.tar.gz && cd App-cpanminus-1.7044 && perl bin/cpanm . && cd /root \
-    && savedPackages="make netbase" \
-    && apt-mark auto '.*' > /dev/null \
-    && apt-mark manual $savedPackages \
-    && apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false \
-    && rm -fr /var/cache/apt/* /var/lib/apt/lists/* \
-    && rm -fr ./cpanm /root/.cpanm /usr/src/perl /usr/src/App-cpanminus-1.7044* /tmp/*
-
-WORKDIR /
-
-CMD ["perl5.22.4","-de0"]

5.022.004-main,longdouble,threaded-buster/DevelPatchPerl.patch

@@ -1,264 +0,0 @@
-diff --git a/Configure b/Configure
-index 5f5f279..8ce5cbb 100755
---- a/Configure
-+++ b/Configure
-@@ -4658,7 +4658,7 @@ else
- fi
- $rm -f try try.*
- case "$gccversion" in
--1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-+1.*) cpp=`./loc gcc-cpp $cpp $pth` ;;
- esac
- case "$gccversion" in
- '') gccosandvers='' ;;
-@@ -4698,7 +4698,7 @@ esac
- # gcc 3.* complain about adding -Idirectories that they already know about,
- # so we will take those off from locincpth.
- case "$gccversion" in
--3*)
-+3.*)
-     echo "main(){}">try.c
-     for incdir in $locincpth; do
-        warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
-@@ -5410,13 +5410,13 @@ fi
- case "$hint" in
- default|recommended)
- 	case "$gccversion" in
--	1*) dflt="$dflt -fpcc-struct-return" ;;
-+	1.*) dflt="$dflt -fpcc-struct-return" ;;
- 	esac
- 	case "$optimize:$DEBUGGING" in
- 	*-g*:old) dflt="$dflt -DDEBUGGING";;
- 	esac
- 	case "$gccversion" in
--	2*) if $test -d /etc/conf/kconfig.d &&
-+	2.*) if $test -d /etc/conf/kconfig.d &&
- 			$contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- 		then
- 			# Interactive Systems (ISC) POSIX mode.
-@@ -5425,7 +5425,7 @@ default|recommended)
- 		;;
- 	esac
- 	case "$gccversion" in
--	1*) ;;
-+	1.*) ;;
- 	2.[0-8]*) ;;
- 	?*)	set strict-aliasing -fno-strict-aliasing
- 		eval $checkccflag
-@@ -5534,7 +5534,7 @@ case "$cppflags" in
- *)  cppflags="$cppflags $ccflags" ;;
- esac
- case "$gccversion" in
--1*) cppflags="$cppflags -D__GNUC__"
-+1.*) cppflags="$cppflags -D__GNUC__"
- esac
- case "$mips_type" in
- '');;
-@@ -23010,7 +23010,7 @@ fi
- 
- : add -D_FORTIFY_SOURCE if feasible and not already there
- case "$gccversion" in
--[45].*)	case "$optimize$ccflags" in
-+[456789].*|[1-9][0-9]*)	case "$optimize$ccflags" in
- 	*-O*)	case "$ccflags$cppsymbols" in
- 		*_FORTIFY_SOURCE=*) # Don't add it again.
- 			echo "You seem to have -D_FORTIFY_SOURCE already, not adding it." >&4
-diff --git a/cpan/Time-Local/t/Local.t b/cpan/Time-Local/t/Local.t
-index 472e71a..0a852a0 100644
---- a/cpan/Time-Local/t/Local.t
-+++ b/cpan/Time-Local/t/Local.t
-@@ -91,7 +91,7 @@ for (@time, @neg_time) {
- 
-         # Test timelocal()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timelocal($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = localtime($time);
-@@ -107,7 +107,7 @@ for (@time, @neg_time) {
- 
-         # Test timegm()
-         {
--            my $year_in = $year < 70 ? $year + 1900 : $year;
-+            my $year_in = $year + 1900;
-             my $time = timegm($sec,$min,$hour,$mday,$mon,$year_in);
- 
-             my($s,$m,$h,$D,$M,$Y) = gmtime($time);
-@@ -125,7 +125,6 @@ for (@time, @neg_time) {
- 
- for (@bad_time) {
-     my($year, $mon, $mday, $hour, $min, $sec) = @$_;
--    $year -= 1900;
-     $mon--;
- 
-     eval { timegm($sec,$min,$hour,$mday,$mon,$year) };
-@@ -134,14 +133,14 @@ for (@bad_time) {
- }
- 
- {
--    is(timelocal(0,0,1,1,0,90) - timelocal(0,0,0,1,0,90), 3600,
-+    is(timelocal(0,0,1,1,0,1990) - timelocal(0,0,0,1,0,1990), 3600,
-        'one hour difference between two calls to timelocal');
- 
--    is(timelocal(1,2,3,1,0,100) - timelocal(1,2,3,31,11,99), 24 * 3600,
-+    is(timelocal(1,2,3,1,0,2000) - timelocal(1,2,3,31,11,1999), 24 * 3600,
-        'one day difference between two calls to timelocal');
- 
-     # Diff beween Jan 1, 1980 and Mar 1, 1980 = (31 + 29 = 60 days)
--    is(timegm(0,0,0, 1, 2, 80) - timegm(0,0,0, 1, 0, 80), 60 * 24 * 3600,
-+    is(timegm(0,0,0, 1, 2, 1980) - timegm(0,0,0, 1, 0, 1980), 60 * 24 * 3600,
-        '60 day difference between two calls to timegm');
- }
- 
-diff --git a/hints/linux.sh b/hints/linux.sh
-index fb5a46e..c749f0f 100644
---- a/hints/linux.sh
-+++ b/hints/linux.sh
-@@ -85,7 +85,7 @@ uname_minus_m="${uname_minus_m:-"$targetarch"}"
- 
- # Check if we're about to use Intel's ICC compiler
- case "`${cc:-cc} -V 2>&1`" in
--*"Intel(R) C++ Compiler"*|*"Intel(R) C Compiler"*)
-+*"Intel(R) C"*" Compiler"*)
-     # record the version, formats:
-     # icc (ICC) 10.1 20080801
-     # icpc (ICC) 10.1 20080801
-@@ -165,6 +165,9 @@ esac
- # plibpth to bypass this check.
- if [ -x /usr/bin/gcc ] ; then
-     gcc=/usr/bin/gcc
-+# clang also provides -print-search-dirs
-+elif ${cc:-cc} --version 2>/dev/null | grep -q '^clang ' ; then
-+    gcc=${cc:-cc}
- else
-     gcc=gcc
- fi
-@@ -178,6 +181,16 @@ case "$plibpth" in
-     ;;
- esac
- 
-+# For the musl libc, perl should #define _GNU_SOURCE.  Otherwise, some
-+# available functions, like memem, won't be used.  See the discussion in
-+# [perl #133760].  musl doesn't offer an easy way to identify it, but,
-+# at least on alpine linux, the ldd --version output contains the
-+# string 'musl.'
-+case `ldd --version 2>&1` in
-+    musl*)  ccflags="$ccflags -D_GNU_SOURCE" ;;
-+        *) ;;
-+esac
-+
- # libquadmath is sometimes installed as gcc internal library,
- # so contrary to our usual policy of *not* looking at gcc internal
- # directories we now *do* look at them, in case they contain
-@@ -221,92 +234,6 @@ case "$libc" in
-     ;;
- esac
- 
--# Are we using ELF?  Thanks to Kenneth Albanowski <kjahds@kjahds.com>
--# for this test.
--cat >try.c <<'EOM'
--/* Test for whether ELF binaries are produced */
--#include <fcntl.h>
--#include <stdlib.h>
--#include <unistd.h>
--main() {
--	char buffer[4];
--	int i=open("a.out",O_RDONLY);
--	if(i==-1)
--		exit(1); /* fail */
--	if(read(i,&buffer[0],4)<4)
--		exit(1); /* fail */
--	if(buffer[0] != 127 || buffer[1] != 'E' ||
--           buffer[2] != 'L' || buffer[3] != 'F')
--		exit(1); /* fail */
--	exit(0); /* succeed (yes, it's ELF) */
--}
--EOM
--if ${cc:-gcc} $ccflags $ldflags try.c >/dev/null 2>&1 && $run ./a.out; then
--    cat <<'EOM' >&4
--
--You appear to have ELF support.  I'll try to use it for dynamic loading.
--If dynamic loading doesn't work, read hints/linux.sh for further information.
--EOM
--
--else
--    cat <<'EOM' >&4
--
--You don't have an ELF gcc.  I will use dld if possible.  If you are
--using a version of DLD earlier than 3.2.6, or don't have it at all, you
--should probably upgrade. If you are forced to use 3.2.4, you should
--uncomment a couple of lines in hints/linux.sh and restart Configure so
--that shared libraries will be disallowed.
--
--EOM
--    lddlflags="-r $lddlflags"
--    # These empty values are so that Configure doesn't put in the
--    # Linux ELF values.
--    ccdlflags=' '
--    cccdlflags=' '
--    ccflags="-DOVR_DBL_DIG=14 $ccflags"
--    so='sa'
--    dlext='o'
--    nm_so_opt=' '
--    ## If you are using DLD 3.2.4 which does not support shared libs,
--    ## uncomment the next two lines:
--    #ldflags="-static"
--    #so='none'
--
--	# In addition, on some systems there is a problem with perl and NDBM
--	# which causes AnyDBM and NDBM_File to lock up. This is evidenced
--	# in the tests as AnyDBM just freezing.  Apparently, this only
--	# happens on a.out systems, so we disable NDBM for all a.out linux
--	# systems.  If someone can suggest a more robust test
--	#  that would be appreciated.
--	#
--	# More info:
--	# Date: Wed, 7 Feb 1996 03:21:04 +0900
--	# From: Jeffrey Friedl <jfriedl@nff.ncl.omron.co.jp>
--	#
--	# I tried compiling with DBM support and sure enough things locked up
--	# just as advertised. Checking into it, I found that the lockup was
--	# during the call to dbm_open. Not *in* dbm_open -- but between the call
--	# to and the jump into.
--	#
--	# To make a long story short, making sure that the *.a and *.sa pairs of
--	#   /usr/lib/lib{m,db,gdbm}.{a,sa}
--	# were perfectly in sync took care of it.
--	#
--	# This will generate a harmless Whoa There! message
--	case "$d_dbm_open" in
--	'')	cat <<'EOM' >&4
--
--Disabling ndbm.  This will generate a Whoa There message in Configure.
--Read hints/linux.sh for further information.
--EOM
--		# You can override this with Configure -Dd_dbm_open
--		d_dbm_open=undef
--		;;
--	esac
--fi
--
--rm -f try.c a.out
--
- if ${sh:-/bin/sh} -c exit; then
-   echo ''
-   echo 'You appear to have a working bash.  Good.'
-diff --git a/pp.c b/pp.c
-index 3173c5a..f2a37bd 100644
---- a/pp.c
-+++ b/pp.c
-@@ -3624,8 +3624,12 @@ PP(pp_crypt)
- #if defined(__GLIBC__) || defined(__EMX__)
- 	if (PL_reentrant_buffer->_crypt_struct_buffer) {
- 	    PL_reentrant_buffer->_crypt_struct_buffer->initialized = 0;
--	    /* work around glibc-2.2.5 bug */
-+#if (defined(__GLIBC__) && __GLIBC__ == 2) && \
-+    (defined(__GLIBC_MINOR__) && __GLIBC_MINOR__ >= 2 && __GLIBC_MINOR__ < 4)
-+	    /* work around glibc-2.2.5 bug, has been fixed at some
-+	     * time in glibc-2.3.X */
- 	    PL_reentrant_buffer->_crypt_struct_buffer->current_saltbits = 0;
-+#endif
- 	}
- #endif
-     }

5.022.004-main,longdouble,threaded-buster/Dockerfile

@@ -1,59 +0,0 @@
-FROM debian:buster-backports
-LABEL maintainer="Ryan Voots <simcop@cpan.org>"
-
-COPY *.patch /usr/src/perl/
-WORKDIR /usr/src/perl
-
-ENV DEBIAN_FRONTEND=noninteractive
-
-RUN perl -i.bak -pE '$x=$_; $x=~s|^deb |deb-src |g;$_.=$x' /etc/apt/sources.list \
-    && apt update \
-    && apt -yq full-upgrade \
-    && apt -yq build-dep perl \
-    &&     apt-get install -y --no-install-recommends \
-       bzip2 \
-       ca-certificates \
-       # cpio \
-       curl \
-       dpkg-dev \
-       # file \
-       gcc \
-       # g++ \
-       libbz2-dev \
-       libdb-dev \
-       libc6-dev \
-       libgdbm-dev \
-       liblzma-dev \
-       make \
-       netbase \
-       patch \
-       procps \
-       zlib1g-dev \
-       xz-utils \
-    && curl -SL https://www.cpan.org/src/5.0/perl-5.22.4.tar.xz -o perl-5.22.4.tar.xz \
-    && echo '713243dce27d7aa0bdbf52b2070de5ce449f9ffbcc14a93efbc6f2beff0f5ce8 *perl-5.22.4.tar.xz' | sha256sum -c -
-RUN tar --strip-components=1 -xaf perl-5.22.4.tar.xz -C /usr/src/perl \
-    && rm perl-5.22.4.tar.xz \
-    && cat *.patch | patch -p1 \
-    && echo 'print "1..0 # Skipped: Tests are invalid"' > /usr/src/perl/ext/GDBM_File/t/fatal.t
-RUN gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)" \
-    && archBits="$(dpkg-architecture --query DEB_BUILD_ARCH_BITS)" \
-    && archFlag="$([ "$archBits" = '64' ] && echo '-Duse64bitall' || echo '-Duse64bitint')" \
-    && ./Configure -Darchname="$gnuArch" "$archFlag" -Duselongdouble -Dusethreads -Duseshrplib -Dvendorprefix=/usr/local -Aldflags='-Wl,-z,now -Wl,-zrelro -Wl,-z,noexecstack' -Accflags='-fpie -fPIC -fstack-protector-all -pie -D_FORTIFY_SOURCE=2' -Duseshrplib  -des \
-    && make -j$(nproc) \
-    && TEST_JOBS=$(nproc) make test_harness
-RUN make install \
-    && cd /usr/src \
-    && curl -LO https://www.cpan.org/authors/id/M/MI/MIYAGAWA/App-cpanminus-1.7044.tar.gz \
-    && echo '9b60767fe40752ef7a9d3f13f19060a63389a5c23acc3e9827e19b75500f81f3 *App-cpanminus-1.7044.tar.gz' | sha256sum -c - \
-    && tar -xzf App-cpanminus-1.7044.tar.gz && cd App-cpanminus-1.7044 && perl bin/cpanm . && cd /root \
-    && savedPackages="make netbase" \
-    && apt-mark auto '.*' > /dev/null \
-    && apt-mark manual $savedPackages \
-    && apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false \
-    && rm -fr /var/cache/apt/* /var/lib/apt/lists/* \
-    && rm -fr ./cpanm /root/.cpanm /usr/src/perl /usr/src/App-cpanminus-1.7044* /tmp/*
-
-WORKDIR /
-
-CMD ["perl5.22.4","-de0"]